User Guide

Main drive assembly
Before proceeding, remove the following components:
●
Toner-collection unit. See
Toner-collection unit on page 91.
●
Formatter PCA. See
Formatter PCA on page 105.
●
Formatter case. See
Formatter case on page 130.
●
Right-front cover and control-panel assembly. See
Right-front cover and control-panel assembly
on page 113.
●
Left cover. See
Left cover on page 115.
●
Rear cover. See
Rear cover on page 116.
●
Toner collection unit access door. See
Toner collection unit access door on page 117.
●
Right-rear cover. See
Right-rear cover on page 119.
●
Top cover. See
Top cover on page 121.
●
Residual-toner full sensor. See
Residual toner full sensor on page 152.
Remove the main drive assembly
1. Disconnect three connectors (callout 1) and one FFC (callout 2).
Figure 2-85 Remove the main drive assembly (1 of 17)
2
1
ENWW
Removal and replacement procedures
157