User Guide

Clean the paper path
Process a cleaning page
1. Press the Home button
.
2. Open the following menus:
●
Device Maintenance
●
Calibration/Cleaning
3. Press the Down arrow
to highlight the Print Cleaning Page item, and then press the OK
button.
4. The product prints a cleaning page, and then returns to the main menu. Discard the printed page.
Set up an auto cleaning page
Use the procedure in this section to set up an automatic cleaning page.
1. Press the Home button
.
2. Open the following menus:
●
Device Maintenance
●
Calibration/Cleaning
3. Press the Down arrow
to highlight the Auto Cleaning item, and then select the Enabled
item. Press the OK button.
4. Press the Down arrow
to highlight the Cleaning Interval item, and then use the arrow
buttons to select an interval. Press the OK button.
TIP: HP recommends processing a cleaning page after every 5000 printed pages.
5. Press the Down arrow to highlight the Auto Cleaning Size item, and then use the arrow
buttons to select the cleaning page size. Press the OK button.
ENWW
Tools for troubleshooting
349