Owner manual

3. Click the Job Storage tab.
4. Select the job storage mode that you want.
5. To automatically generate the job name associated with the stored document, in the Job Name
area, click the Automatic option. The driver uses the document file name, if it is available. If the
document has no file name, the driver uses the software program name or a time stamp for the job
name.
To specify a job name, click the Custom option and type the name.
6. Select an option from the If job name exists drop-down list.
●
Select the Use Job Name + (1-99) option to add a number to the end of the existing
name.
●
Select the Replace Existing File option to overwrite a job that already has that name.
Print special jobs with Windows
Set the duplex alignment
For documents that are printed on both sides, such as brochures, set the registration for the tray before
printing to ensure that the front and back of the page are aligned.
1. From the Home screen, touch the Administration button.
2. Open the following menus:
a. General Settings
b. Print Quality
c. Image Registration
d. Adjust Tray <X>
3. Touch the Print Test Page setting, and then touch the OK button.
4. Follow the instructions on the test page to complete the adjustment.
152 Chapter 8 Print tasks ENWW