Owner manual

Table 2-12 Stapler/Stacker Settings menu (continued)
First level Values
Stapling None
Top left or right
Top left
Top right
Staples Very Low Continue
Stop
Network Settings menu
To display: At the product control panel, select the Administration menu, and then select the Network
Settings menu.
In the following table, asterisks (*) indicate the factory default setting.
Table 2-13 Network Settings menu
First level Values
I/O Timeout Range: 5 – 300 sec
Default = 15
Embedded Jetdirect Menu
EIO <X> Jetdirect Menu
See the table that follows for details. These menus have the same
structure. If an additional HP Jetdirect network card is installed in the
EIO slot, then both menus are available.
Table 2-14 Embedded Jetdirect Menu/EIO <X> Jetdirect Menu
First level Second level Third level Fourth level Values
Information Print Sec Page Yes
No*
TCP/IP Enable On*
Off
Host Name
IPV4 Settings Config Method Bootp
DHCP*
Auto IP
Manual
ENWW
Administration menu
39