Owner manual

IPv6: If the IP address begins with "fe80:", the product should be able to print. If not, you must
manually configure the IP address.
Install the software
1. Quit all programs on the computer.
2. Install the software from the CD.
3. Follow the onscreen instructions.
4. When prompted, select the Connected through a wired network option.
5. From the list of available printers, select the printer that has the correct IP address.
6. At the end of the installation, click the Finish button, or click the More Options button to install
more software or configure basic digital sending features for the product.
●
Install the HP PC Send Fax driver to enable sending faxes from your computer. (Fax models
only)
●
Use the HP Scan to Email Setup Wizard to configure basic E-mail settings.
●
Use the HP Save to Folder Setup Wizard to set up a shared folder on the network where you
can store scanned documents.
7. Print a page from any program to make sure that the software is correctly installed.
78 Chapter 5 Connect the product ENWW