User Guide

Table 1-14 Paper deck pickup-and-feed operation components (continued)
Abbreviation Component Signal
SW83 PD cassette 2 media end switch PD CASSETTE 2 MEDIA END signal
M91 PD cassette 3 pickup motor PD CASSETTE 3 PICKUP MOTOR CONTROL signal
M92 PD cassette 3 lifter motor PD CASSETTE 3 LIFTER MOTOR CONTROL signal
SL91 PD cassette 3 pickup solenoid PD CASSETTE 3 PICKUP SOLENOID signal
SR91 PD cassette 3 media feed sensor PD CASSETTE 3 MEDIA FEED signal
SR92 PD cassette 3 media stack surface sensor PD CASSETTE 3 MEDIA STACK SURFACE signal
SR93 PD cassette 3 media out sensor PD CASSETTE 3 MEDIA OUT signal
SW92 PD cassette 3 media width switch PD CASSETTE 3 MEDIA WIDTH signal
SW93 PD cassette 3 media end switch PD CASSETTE 3 MEDIA END signal
Paper deck cassette media-size detection and cassette-presence detection
The paper deck controller detects the size of paper loaded in the cassette and also whether the cassette
is installed to the paper deck by monitoring the PD cassette media-width switch and the PD cassette
media-end switch.
The PD cassette media-width switch and the PD cassette media-end switch contain three sub-switches
each. The paper deck controller detects the size of paper and the presence of the cassette according to
the combination of the sub-switches, and then notifies the formatter.
The cassette media-size detection and the cassette-presence detection are not performed during Sleep
mode.
Table 1-15 Paper deck media switch combinations
Paper size Cassette media-width switch Cassette media-end switch
Top Center Bottom Top Center Bottom
Cassette
absence
OFF OFF OFF OFF OFF OFF
A5-R ON ON OFF ON ON ON
B5-R OFF ON OFF ON ON ON
Executive-R OFF ON ON ON ON ON
Letter-R OFF OFF ON ON ON ON
A4-R OFF OFF OFF ON ON ON
8.5 x 13 in ON ON OFF OFF ON ON
Legal ON ON OFF OFF OFF ON
B4 OFF ON OFF OFF OFF ON
ENWW
1x500 and 3x500 paper feeder and stand
71