User Guide

Tray/bin manual sensor tests
Use this test to test paper-path sensors and the paper-size switches manually. The following illustrations
and table show the locations of these sensors.
1. From the Home screen on the product control panel, scroll to and touch the Administration button.
2. Open the following menus:
●
Troubleshooting
●
Diagnostic Tests
●
Tray/Bin Manual Sensor Test
Table 2-11 Tray/bin manual sensor test
Sensor or switch
name
Sensor
number
Replacement
part number
Replacement
part description
Paper-path
sensor test name
Testing of sensor
Multipurpose tray
paper-presence
sensor
SR1 RM1-8660-000CN Cartridge door SR1 Tray 1 paper Push the sensor lever
and hold it there for
3 seconds.
Tray 2 paper-
presence sensor
SR7 RM2-0182-000CN Tray 2 paper pick-
up assembly
SR7 Tray 2 paper Remove Tray 2 and
Tray 3, and then
push the sensor lever
on the right side of
the tray cavity.
Tray 2 paper surface
sensor
SR10 RM1-2969-000CN Lifter drive assembly SR10 Tray 2 paper
surface
Remove Tray 2 and
Tray 3, and then
push the sensor at
the back of the tray
cavity.
Tray 2 paper size
switches
SW 4,
SW6
RM1-2969-000CN Lifter drive assembly SW4, 6 Tray 2
Paper Size
Remove Tray 2 and
Tray 3, and then
push the switches at
the back of the tray
cavity.
Tray 3 paper-
presence sensor
SR5 RM2-0183-000CN Tray 3 paper pick-
up assembly
SR5 Tray 3 paper Remove Tray 2 and
Tray 3, and then
push the sensor lever
on the right side of
the tray cavity.
Tray 3 paper surface
sensor
SR11 RM1-2969-000CN Lifter drive assembly SR11 Tray 3 paper
surface
Remove Tray 2 and
Tray 3, and then
push the sensor at
the back of the tray
cavity.
Tray 3 paper size
switches
SW5,
SW7
RM1-2969-000CN Lifter drive assembly SW5, 7 Tray 3
Paper Size
Remove Tray 2 and
Tray 3, and then
push the switches at
the back of the tray
cavity.
ENWW
Tools for troubleshooting
153