User Guide

Manage Trays menu
To display: At the product control panel, select the Administration menu, and then select the Manage
Trays menu.
In the following table, asterisks (*) indicate the factory default setting.
Table 2-26 Manage Trays menu
First level Values Description
Use Requested Tray Exclusively*
First
Controls how the product handles jobs that
have specified a specific input tray. Two
options are available:
Exclusively: The product never selects a
different tray when the user has indicated
that a specific tray should be used, even if
that tray is empty.
First: The product pulls from another tray if
the specified tray is empty, even though the
user specifically indicated a tray for the job.
Manually Feed Prompt Always*
Unless loaded
Indicate whether a prompt should appear
when the type or size for a job does not
match the specified tray and the product
pulls from the multipurpose tray instead. Two
options are available:
Always: A prompt always displays before
using the multipurpose tray.
Unless loaded: A message displays only if
the multipurpose tray is empty.
Size/Type Prompt Display*
Do not display
Controls whether the tray configuration
message displays whenever a tray is closed.
Two options are available:
Display: This option shows the tray
configuration message when a tray is closed.
The user is able to configure the tray settings
directly from this message.
Do not display: This option prevents the tray
configuration message from automatically
appearing.
ENWW
Tools for troubleshooting
273