User Guide

Calibration/Cleaning menu
To display: At the product control panel, select the Device Maintenance menu, and then select the
Calibration/Cleaning menu.
In the following table, asterisks (*) indicate the factory default setting.
Table 2-31 Calibration/Cleaning menu
First level Second level Values Description
Cleaning Settings Auto Cleaning Off*
On
Use to select the Auto Cleaning
menu or the Cleaning Interval
menu.
Cleaning Interval Select from a list of cleaning
intervals.
Use to set the interval when the
cleaning page should be printed.
The interval is measured by the
number of pages printed.
Cleaning Size Select from a list of support sizes. Select the paper size to use for
the cleaning page.
Cleaning Page Print Use to process the cleaning page
that was created by using the
Create Cleaning Page menu. The
process takes up to 1.5 minutes.
Calibrate Scanner Touch Next to calibrate the
device scanner. Messages on the
control panel display will lead
you through the calibration
process.
Clean Rollers Perform automatic cleaning for
the document-feeder rollers.
Clean Document Feeder Settings Low Threshold Settings Range: 0–100%
Default = 10%
Configure cleaning settings for
the document feeder.
Very Low Settings Stop
Prompt to continue*
Continue
294 Chapter 2 Solve problems ENWW