User Guide

33.03.02
Description
The controller encountered an unexpected data length value for the engine to recover the DCC NVRAM
value.
Recommended action
Turn the product power off, and then on again.
If the error persists, please escalate this problem to your Global Business unit (return the product ICB to
the Global Business unit with a full diagnostic log from the product).
33.WX.YZ Used board/disk installed
Description
An encrypted board or disk with existing data previously locked to a different product has replaced the
original. If you continue, data is permanently lost.
Recommended action
◦
To save the data on the board or disk, turn the product off. Replace the board or disk with another
board or disk.
◦
To delete the data on the board or disk and continue, press the OK button.
40.00.01 USB I/O buffer overflow To continue, touch “OK”
Description
The USB buffer overflowed during a busy state.
Recommended action
1. Press the OK button to print the transferred data. Some data might be lost.
2. Check the host configuration.
40.00.02 Embedded I/O buffer overflow To continue, touch “OK”
Description
Too much data was sent to the embedded HP Jetdirect print server. An incorrect communications
protocol might be in use.
Recommended action
1. Press the OK button to print the transferred data. Some data might be lost.
2. Check the host configuration.
ENWW
Tools for troubleshooting
341