User Guide

First level Second level Value Description
ADF Simplex Count Set the total single-sided pages fed
through the document feeder.
ADF Duplex Count Set the total two-sided pages fed
through the document feeder.
Copy Scan Count Set the total copy pages that have
been scanned.
Send Scan Count Set the number of scanned pages
sent to email.
Fax Scan Count
Copy Pages Count Set the number of scanned pages
that have been printed.
Scanner Settings ADF Settings Leading-
edge
Trailing-
edge
Left Side
Front
Left Side
Back
Set the calibration values.
WARNING! Do not change
these values unless instructed to do
so.
Glass Settings Leading
edge glass
Left Side
Glass
Serial Number Set the serial number.
Service ID Use this item to show the date that
the product was first used on the
control panel. This eliminates the
need for users to keep paper
receipts for proof of warranty.
Cold Reset Paper When you perform a cold reset,
the paper size that is stored in
NVRAM is reset to the default
factory setting. If you replace a
formatter board in a country/
region that uses A4 as the standard
paper size, use this menu to reset
the default paper size to A4.
LETTER and A4 are the only
available values.
New Registration Roller Yes
No
Reset the counter for the
registration roller after replacing
the registration assembly.
PTT Test Mode (fax models only) Test the internal modem for the
analog fax accessory.
ENWW
Service mode functions
449