Software Technical Reference

Figure 4-10 Print on Both Sides Instructions
Instructions for manually printing on both sides
Follow these steps to manually print on both sides.
1. Click File, click Print, and then click Properties.
2. Click the Finishing tab, and then click the Print on Both Sides check box. Click OK to continue.
3. When the even-numbered pages have printed, the Load Tray (X) - Press
message appears
on the product control panel and the Print on Both Sides Instructions dialog box appears on the
computer screen.
a. Without changing the orientation, remove the paper stack from the output bin. Do not discard
blank sheets.
b. Insert the paper stack into the same input tray that the even-numbered pages (first sides)
were printed from, maintaining the same orientation (that is, with the same edge of the page
feeding into the product first).
c. Click OK or press the OK button on the product control panel to print the odd-numbered pages.
Flip Pages Up
The Flip Pages Up check box, enabled only when Print on Both Sides (Manually) is selected, is used
to specify the duplex-binding option. By default, the Flip Pages Up check box is not selected. The
following table demonstrates the results of selecting this box, depending on the paper orientation
selected on the Finishing tab.
128 Chapter 4 Host-based printer driver features for Windows ENWW