User's Manual
Table Of Contents
- Product basics
- Control panel
- Software for Windows
- Use the product with Macintosh
- Connectivity
- Paper and print media
- Print tasks
- Change the print driver to match the media type and size
- Get help for any print option
- Cancel a print job
- Change the default settings
- Create booklets
- Change print-quality settings
- Change print density
- Print on special media
- Use different paper and print covers
- Print a blank first page
- Resize documents
- Select a paper size
- Select a paper source
- Select a paper type
- Set the print orientation
- Use watermarks
- Save toner
- Print on both sides of the paper (duplex printing)
- Print multiple pages on one sheet of paper in Windows
- Economy settings
- Copy
- Scan
- Fax
- Fax features
- Setup
- Change fax settings
- Set the sound-volume settings
- Send fax settings
- Receive fax settings
- Set or change number of rings-to-answer
- Set the answer mode
- Set fax forwarding
- Set up distinctive ring
- Use the private receive feature
- Set up the computer to receive faxes
- Use autoreduction for incoming faxes
- Set the silence-detect mode
- Set the default fax reprint settings
- Create stamp-received faxes
- Block or unblock fax numbers
- Make an extension telephone available to receive faxes
- Use fax
- Fax software
- Cancel a fax
- Delete faxes from memory
- Use fax on a DSL, PBX, ISDN, or VoIP system
- Send a fax
- Receive a fax
- Solve fax problems
- Manage and maintain the product
- Problem solve
- Accessories and ordering information
- Service and support
- Specifications
- Regulatory information
- FCC compliance
- Environmental product stewardship program
- Protecting the environment
- Ozone production
- Power consumption
- Toner consumption
- Paper use
- Plastics
- HP LaserJet print supplies
- Return and recycling instructions
- Paper
- Material restrictions
- Disposal of waste equipment by users in private households in the European Union
- Chemical substances
- Material Safety Data Sheet (MSDS)
- For more information
- Telephone Consumer Protection Act (United States)
- IC CS-03 requirements
- EU statement for telecom operation
- New Zealand telecom statements
- Declaration of conformity
- Safety statements
- Glossary
- Index
Specks Smearing
1. Press Setup.
2. Use the arrow buttons to find the Service menu, and then press OK.
3. Use the arrow buttons to find Cleaning mode, and then press OK.
4. Load plain letter or A4 paper when you are prompted.
5. Press OK again to confirm and begin the cleaning process.
A page feeds through the product slowly. Discard the page when the process is completed.
Clean the exterior
Use a soft, damp, lint-free cloth to wipe dust, smudges, and stains off of the exterior of the product.
Firmware updates
Firmware updates and installation instructions for this product are available at www.hp.com/support/
ljm1319. Click Downloads and drivers, click the operating system, and then select the firmware
download for the product.
ENWW Manage supplies 133