User's Manual
Table Of Contents
- Product basics
- Control panel
- Software for Windows
- Use the product with Macintosh
- Connectivity
- Paper and print media
- Print tasks
- Change the print driver to match the media type and size
- Get help for any print option
- Cancel a print job
- Change the default settings
- Create booklets
- Change print-quality settings
- Change print density
- Print on special media
- Use different paper and print covers
- Print a blank first page
- Resize documents
- Select a paper size
- Select a paper source
- Select a paper type
- Set the print orientation
- Use watermarks
- Save toner
- Print on both sides of the paper (duplex printing)
- Print multiple pages on one sheet of paper in Windows
- Economy settings
- Copy
- Scan
- Fax
- Fax features
- Setup
- Change fax settings
- Set the sound-volume settings
- Send fax settings
- Receive fax settings
- Set or change number of rings-to-answer
- Set the answer mode
- Set fax forwarding
- Set up distinctive ring
- Use the private receive feature
- Set up the computer to receive faxes
- Use autoreduction for incoming faxes
- Set the silence-detect mode
- Set the default fax reprint settings
- Create stamp-received faxes
- Block or unblock fax numbers
- Make an extension telephone available to receive faxes
- Use fax
- Fax software
- Cancel a fax
- Delete faxes from memory
- Use fax on a DSL, PBX, ISDN, or VoIP system
- Send a fax
- Receive a fax
- Solve fax problems
- Manage and maintain the product
- Problem solve
- Accessories and ordering information
- Service and support
- Specifications
- Regulatory information
- FCC compliance
- Environmental product stewardship program
- Protecting the environment
- Ozone production
- Power consumption
- Toner consumption
- Paper use
- Plastics
- HP LaserJet print supplies
- Return and recycling instructions
- Paper
- Material restrictions
- Disposal of waste equipment by users in private households in the European Union
- Chemical substances
- Material Safety Data Sheet (MSDS)
- For more information
- Telephone Consumer Protection Act (United States)
- IC CS-03 requirements
- EU statement for telecom operation
- New Zealand telecom statements
- Declaration of conformity
- Safety statements
- Glossary
- Index
Open the printer driver and change the print settings
Operating System To change the settings for all
print jobs until the software
program is closed
To change the default settings
for all print jobs
To change the device
configuration settings
Windows 2000, XP,
Server 2003, and
Vista
1. On the File menu in the
software program, click
Print.
2. Select the driver, and then
click Properties or
Preferences.
The steps can vary; this
procedure is most common.
1. Click Start, click Settings,
and then click Printers
(Windows 2000) or
Printers and Faxes
(Windows XP Professional
and Server 2003) or
Printers and Other
Hardware Devices
(Windows XP Home).
For Windows Vista, click
Start, click Control Panel,
and then click Printer.
2. Right-click the driver icon,
and then select Printing
Preferences.
1. Click Start, click Settings,
and then click Printers
(Windows 2000) or
Printers and Faxes
(Windows XP Professional
and Server 2003) or
Printers and Other
Hardware Devices
(Windows XP Home).
For Windows Vista, click
Start, click Control Panel,
and then click Printer.
2. Right-click the driver icon,
and then select
Properties.
3. Click the Configure tab.
ENWW Open the printer driver and change the print settings 21