User Guide

HP Jetdirect LEDs

The embedded HP Jetdirect print server has two LEDs. The yellow LED indicates network activity, and

the green LED indicates the link status. A blinking yellow LED indicates network traffic. If the green LED

is off, a link has failed.

For link failures, check all the network cable connections. In addition, you can try to manually configure

the link settings on the embedded print server by using the product control-panel menus.

1. From the Home screen on the product control panel, scroll to and touch the Administration button.

2. Open the following menus:

●

Network Settings

●

Embedded Jetdirect Menu

●

Link Speed

3. Select the appropriate link speed, and then touch the OK button.

Engine diagnostics

The product contains extensive internal engine diagnostics that help in troubleshooting print quality,

paper path, noise, assembly, and timing issues.

Engine-test button

To verify that the product engine is functioning, print an engine-test page.

Print the engine test pages

NOTE: A damaged formatter might interfere with the engine test. If the engine test page does not

print, try removing the formatter and performing the engine test again. If the engine test is then

successful, the problem is in the formatter, the control panel, or the cable that connects them together.

1. Remove the formatter cover.

ENWW

Tools for troubleshooting