User Guide

PS8001 Rear door sensor test
Test the rear door sensor (PS8001)
1. Open the rear door, and then gently pull down on the door and lower the door until it is fully
open to activate the sensor.
Figure 2-3 Test the rear door sensor (1 of 2)
Figure 2-4 Test the rear door sensor (2 of 2)
2. Check the control-panel display for sensor response.
3. If there is no response, make sure that the sensor-actuator tab on the door is not damaged or
missing.
If necessary, replace the rear door sensor.
90 Chapter 2 Solve problems ENWW