User Guide

Tray/bin manual sensor test
Use this test to test paper-path sensors and the paper-size switches manually. The following illustrations
and table show the locations of these sensors.
1. From the Home screen on the product control panel, scroll to and touch the Administration button.
2. Open the following menus:
●
Troubleshooting
●
Diagnostic Tests
●
Tray/Bin Manual Sensor Test
Table 2-11 Tray/bin manual sensor test
Sensor or switch
name
Sensor
number
Replacement
part number
Description Paper-path
sensor test name
Testing of sensor
MP tray media-
presence sensor
PS205 RM1-8621-000CN MP sensor PCA PS205 Tray 1 Paper Push the sensor lever
to the right of the
center of the tray,
and hold it there for
3 seconds.
Cassette media-
presence sensor
PS3 RM1-8508-000CN Tray 2 paper pickup
assembly
PS3 Tray 2 Paper Remove the Tray 2,
and then push the
sensor lever.
Tray 2 cassette
presence switch
SW235 RM1-8620-000CN Tray sensor PCA SW235 Tray 2
Cassette
Remove the Tray 2,
and then reinstall it.
Paper feeder media-
feed sensor - Tray 3
PS8008 CE530-69001 Tray 3 feeder unit PS8008 Tray 3 Feed Remove the Tray 2
cassette, use a small
screwdriver to
activate the sensor
through the small
slot toward the front
of the product.
Paper feeder Tray 3
cassette media-
presence sensor
1
PS451 CE530-69001 Tray 3 feeder unit PS451 Tray 3 Paper Remove Tray 3, and
then push the sensor
lever.
Paper feeder Tray 3
cassette presence
sensor
1
PS461 CE530-69001 Tray 3 feeder unit PS461 Tray 3
Cassette
Remove Tray 3, and
then reinstall it.
Paper feeder Tray 4
cassette media-
presence sensor
1
PS451 CE530-69001 Tray 4 feeder unit PS451 Tray 4 Paper Remove Tray 4, and
then push the sensor
lever.
Paper feeder media-
feed sensor - Tray 4
PS8008 (Replace feeder unit) Tray 4 feeder unit PS8008 Tray 4 Feed Remove the Tray 3
cassette, use a small
screwdriver to
activate the sensor
through the small
slot toward the front
of the product.
ENWW
Tools for troubleshooting
99