User Guide

Each component test can be performed once or repeatedly. If you turn on the Repeat option from the
drop-down menu, the test cycles the component on and off. This process continues for two minutes, and
then the test terminates.
1. From the Home screen on the product control panel, scroll to and touch the Administration button.
2. Open the following menus:
●
Troubleshooting
●
Diagnostic Tests
●
Component Test
3. Select the component test options for the test you want to run.
Table 2-13 Component tests
Component test Item Control-panel display
message
Description
Main motor test M8001 Drum Motor Activates the main motor for 10 seconds.
Fuser motor test M8002 Fuser Motor Activates the fuser motor for 10 seconds.
Tray 1 (multipurpose tray)
pickup solenoid test
SL1 Tray 1 Pickup Solenoid Activates the Tray 1 pickup solenoid for 10
seconds.
Tray 2 pickup solenoid test SL2 Tray 2 Pickup Solenoid Activates the Tray 3 cassette pickup solenoid
for 10 seconds.
Clutch drive test CL1 Feed Roller Clutch Activates the main motor to activate the
paper feeder pickup clutch for 10 seconds.
Scanner motor test Not
applicabl
e
Laser Scanner Motor Activates the laser/scanner motor for 10
seconds.
Tray 3 pickup solenoid test
SL3
1
Tray 3 Pickup Solenoid Activates the Tray 4 cassette pickup solenoid
for 10 seconds.
Tray 4 pickup solenoid test
SL3
1
Tray 4 Pickup Solenoid Activates the Tray 4 cassette pickup solenoid
for 10 seconds.
1
Tray 3 and Tray 4 both use a SL3.
ENWW
Tools for troubleshooting
111