User Guide

Table 2-16 General Settings menu (continued)
First level Second level Third level Fourth level Values Description
Resistance Mode Normal
Up
Down
Use this setting to
correct print quality
problems in low-
humidity
environments and
highly resistive
paper. Use the Up
option to solve print
quality problems that
are related to poor
toner-transfer. Use
the Down option in
the event that small,
“pin-hole” defects
occur.
Humidity Mode Normal
Alternate 1
Alternate 2
Alternate 3
Line Detail Normal
Alternate 1
Off
Optimize Environment Normal*
Low Temp
Enable if the product
is operating in a low
temperature
environment and you
are having problems
with print quality
such as blisters in the
printed image.
Restore Optimize Use to return all the
settings in the
Optimize menu to the
factory-default
values.
Resolution 300 x 300 dpi
600 x 600 dpi
FastRes 1200
ProRes
Sets the resolution at
which the product
prints.
REt On
Off
ENWW
Tools for troubleshooting
133