User Guide

Table 2-17 Copy Settings menu (continued)
First level Second level Third level Values Description
Booklet Format Booklet Booklet off
Booklet on
Use to copy two or more
pages onto one sheet of
paper so you can fold the
sheets in the center to
form a booklet. The
product arranges the
pages in the correct
order. For example, if the
original document has
eight pages, the product
prints pages 1 and 8 on
the same sheet.
Original Sides 1-sided
2-sided
Select the 1-sided option if
the original document is
printed on only one side.
Select the 2-sided option if
the original document is
printed on two sides.
Borders on Each Page To print a border around
each page, select the
Borders on Each Page
option.
Edge-to-Edge Normal (recommended)*
Edge-to-Edge output
Use to avoid shadows that
can appear along the
edges of copies when the
original document is
printed close to the edges.
Combine with the
Reduce/Enlarge feature to
ensure that the entire
page is printed on the
copies. When the Edge-to-
Edge feature is turned on,
the product minimizes
margins and prints as
close to the edge of the
paper as possible.
Job Build
NOTE: For the 525c
model, this item displays
as Job Build and Misfeed
Detection.
Job Build off*
Job Build on
Use to combine several
original documents into
one job. Also use this
feature to scan an original
document that has more
pages than the document
feeder can accommodate
at one time. The product
temporarily saves all the
scanned images. After
you have scanned all the
pages for the job, touch
the Finish option to finish
the job.
ENWW
Tools for troubleshooting
143