User Guide

Table 2-21 Default Print Options menu (continued)
First level Second level Values Description
Default Paper Size Select from a list of sizes that the
product supports.
Configures the default paper size
used for print jobs.
Default Custom Paper Size X Dimension Range: 3–8.5 inches
Default = 8.5 inches
Configures the default paper size
that is used when the user selects
Custom as the paper size for a
print job.
Y Dimension Range: 5–14 inches
Default = 14 inches
Use Inches Enabled*
Disabled
Sides 1-sided*
2-sided
Use to indicate whether the
original document is printed on
one or both sides, and whether
the copies should be printed on
one or both sides. For example,
select the 1-sided original, 2-
sided output option when the
original is printed on one side,
but you want to make two-sided
copies.
Select the Orientation setting to
specify portrait or landscape
orientation and to select the way
the second sides are printed.
2-Sided Format Book-style*
Flip-style
Configures the default style for 2-
sided print jobs. If the Book-style
option is selected, the back side
of the page is printed the right
way up. This option is for print
jobs that are bound along the left
edge. If the Flip-style option is
selected, the back side of the
page is printed upside-down.
This option is for print jobs that
are bound along the top edge.
Edge-to-Edge Normal (recommended)*
Edge-to-Edge output
Use to avoid shadows that can
appear along the edges of
copies when the original
document is printed close to the
edges.
Display Settings menu
To display: At the product control panel, select the Administration menu, and then select the Display
Settings menu.
In the following table, asterisks (*) indicate the factory default setting.
172 Chapter 2 Solve problems ENWW