User Guide

Table 2-23 Manage Supplies menu (continued)
First level Second level Third level Fourth level Values Description
Supply Messages Low Message On*
Off
Use to configure
whether a message
displays on the
control panel when
supplies are getting
low, but have not yet
reached the low
threshold.
Reset Supplies New Document
Feeder Kit
Reset
Cancel
Select this option if
you have installed a
new document
feeder kit.
Manage Trays menu
To display: At the product control panel, select the Administration menu, and then select the Manage
Trays menu.
In the following table, asterisks (*) indicate the factory default setting.
Table 2-24 Manage Trays menu
First level Values Description
Use Requested Tray Exclusively*
First
Controls how the product handles jobs that
have specified a specific input tray. Two
options are available:
Exclusively: The product never selects a
different tray when the user has indicated
that a specific tray should be used, even if
that tray is empty.
First: The product pulls from another tray if
the specified tray is empty, even though the
user specifically indicated a tray for the job.
Manually Feed Prompt Always*
Unless loaded
Indicate whether a prompt should appear
when the type or size for a job does not
match the specified tray and the product
pulls from the multipurpose tray instead. Two
options are available:
Always: A prompt always displays before
using the multipurpose tray.
Unless loaded: A message displays only if
the multipurpose tray is empty.
ENWW
Tools for troubleshooting
177