User Guide

Table 2-24 Manage Trays menu (continued)
First level Values Description
Duplex Blank Pages Auto*
Yes
Control how the product handles two-sided
jobs (duplexing). Two options are available:
Auto: This option enables Smart Duplexing,
which instructs the product not to process
blank pages.
Yes: This option disables Smart Duplexing
and forces the duplexer to flip the sheet of
paper even if it is printed on only one side.
This might be preferable for certain jobs that
use paper types such as letterhead or
prepunched paper.
Override A4/Letter Yes*
No
Prints on letter-size paper when an A4 job is
sent but no A4-size paper is loaded in the
product (or to print on A4 paper when a
letter-size job is sent but no letter-size paper
is loaded). This option will also override A3
with ledger-size paper and ledger with A3-
size paper.
Network Settings menu
To display: At the product control panel, select the Administration menu, and then select the Network
Settings menu.
In the following table, asterisks (*) indicate the factory default setting.
Table 2-25 Network Settings menu
First level Values Description
I/O Timeout Range: 5 – 300 sec
Default = 15
Use to set the I/O timeout period in seconds.
I/O timeout refers to the elapsed time before
a print job fails. If the stream of data that the
product receives for a print job gets
interrupted, this setting indicates how long
the product will wait before it reports that the
job has failed.
Jetdirect Menu See the table that follows for details. These
menus have the same structure. If an
additional HP Jetdirect network card is
installed in the EIO slot, then both menus are
available.
ENWW
Tools for troubleshooting
179