User Guide

Table 2-26 Jetdirect Menu (continued)
First level Second level Third level Fourth level Values Description
IPV4 Settings Config Method Bootp
DHCP*
Auto IP
Manual
Specifies the method
that TCP/IPv4
parameters will be
configured on the
HP Jetdirect print
server.
Bootp (Bootstrap
Protocol): Use for
automatic
configuration from a
BootP server.
DHCP (Dynamic Host
Configuration
Protocol): Use for
automatic
configuration from a
DHCPv4 server. If
selected and a DHCP
lease exists, the
DHCP Release menu
and the DHCP
Renew menu are
available to set
DHCP lease options.
Auto IP: Use for
automatic link-local
IPv4 addressing. An
address in the form
169.254.x.x is
assigned
automatically.
If you set this option
to the Manual
setting, use the
Manual Settings
menu to configure
TCP/IPv4
parameters.
Manual Settings
NOTE: This menu
is available only if
you select the
Manual option under
the Config Method
menu.
IP Address Enter the address. (Available only if the
Config Method
option is set to the
Manual option.)
Configure
parameters directly
from the product
control panel:
Subnet Mask Enter the address.
Default Gateway Enter the address.
ENWW
Tools for troubleshooting
181