User Guide

Table 2-26 Jetdirect Menu (continued)
First level Second level Third level Fourth level Values Description
Default IP Auto IP*
Legacy
Specify the IP
address to default to
when the print server
is unable to obtain
an IP address from
the network during a
forced TCP/IP
reconfiguration (for
example, when
manually configured
to use BootP or
DHCP).
NOTE: This feature
assigns a static IP
address that might
interfere with a
managed network.
Auto IP: A link-local
IP address
169.254.x.x is set.
Legacy: The address
192.0.0.192 is set,
consistent with older
HP Jetdirect products.
Primary DNS Range: 0 – 255
Default =
xxx.xxx.xx.xx
Specify the IP
address (n.n.n.n) of
a Primary Domain
Name System (DNS)
Server.
Secondary DNS Range: 0 – 255
Default = 0.0.0.0
Specify the IP
address (n.n.n.n) of
a Secondary DNS
Server.
IPV6 Settings Enable Off
On*
Use this item to
enable or disable
IPv6 operation on the
print server.
Off: IPv6 is disabled.
On: IPv6 is enabled.
Address Manual Settings Enable
Address
Use this item to
enable and manually
configure a TCP/
IPv6 address.
182 Chapter 2 Solve problems ENWW