User Guide

Table 2-26 Jetdirect Menu (continued)
First level Second level Third level Fourth level Values Description
Execution Time [H] Range: 1 – 24 hours
Default = 1 hour
Specify the length of
time (in hours) that
an embedded test
will be run. If you
select zero (0), the
test runs indefinitely
until an error occurs
or the product is
turned off.
Data gathered from
the HTTP, SNMP,
and Data Path tests is
printed after the tests
have completed.
Execute No*
Yes
No: Do not initiate
the selected tests.
Yes: Initiate the
selected tests.
Ping Test Dest Type IPv4
IPv6
This test is used to
check network
communications. This
test sends link-level
packets to a remote
network host, then
waits for an
appropriate
response. To run a
ping test, set the
following items:
Dest Type
Specify whether the
target product is an
IPv4 or IPv6 node.
Dest IPv4 Range: 0 – 255
Default =
127.0.0.1
Enter the IPv4
address.
Dest IPv6 Select from a
provided list.
Default = : : 1
Enter the IPv6
address.
Packet Size Default = 64 Specify the size of
each packet, in
bytes, to be sent to
the remote host. The
minimum is 64
(default) and the
maximum is 2048.
ENWW
Tools for troubleshooting
189