User Guide

Table 2-26 Jetdirect Menu (continued)
First level Second level Third level Fourth level Values Description
Timeout Default = 001 Specify the length of
time, in seconds, to
wait for a response
from the remote host.
The maximum is
100.
Count Default = 004 Specify the number
of ping test packets
to send for this test.
Select a value from 0
to 100. To configure
the test to run
continuously, select
0.
Print Results Yes
No*
Execute Yes
No*
No: Do not initiate
the selected tests.
Yes: Initiate the
selected tests.
Ping Results Packets Sent Default = 00000 Shows the number of
packets (0 - 65535)
sent to the remote
host since the most
recent test was
initiated or
completed..
Packets Received Default = 00000 Shows the number of
packets (0 - 65535)
received from the
remote host since the
most recent test was
initiated or
completed. The
default is 0.
Percent Lost Default = 000 Shows the percent (0
to 100) of ping test
packets that were
sent with no
response from the
remote host since the
most recent test was
initiated or
completed.
190 Chapter 2 Solve problems ENWW