User Guide

Table 2-27 Troubleshooting menu (continued)
First level Second level Third level Fourth level Values Description
Source Tray Select from a list of
the available trays.
Generates a test
page for testing
paper handling
features. You can
define the path that
is used for the test in
order to test specific
paper paths.
Output Bin All bins
Face down
Face up
Test Duplex Path Off*
On
Number of Copies Range: 1–500
Default = 1
Sets the default
number of copies for
a copy job. This
default applies when
the Copy or Quick
Copy function is
initiated from the
product Home
screen. The factory
default setting is 1.
Manual Sensor Test Select from a list of
available
components.
Reset Sensors
Test the product
sensors and switches
for correct operation.
Each sensor is
displayed on the
control-panel screen,
along with its status.
Manually trip each
sensor and watch for
it to change on the
screen. Press the
Stop button to abort
the test.
Tray/Bin Manual
Sensor Test
Select from a list of
available
components.
Reset Sensors
Test the sensors in
the trays and bins for
correct operation.
Each sensor is
displayed on the
control-panel screen,
along with its status.
Manually trip each
sensor and watch for
it to change on the
screen. Press the
Stop button to abort
the test.
ENWW
Tools for troubleshooting
195