User Guide

Recommended action
◦
To save the data on the board or disk, turn the product off. Replace the board or disk with another
board or disk.
◦
To delete the data on the board or disk and continue, touch the OK button.
40.00.01 USB I/O buffer overflow To continue, touch “OK”
Description
The USB buffer overflowed during a busy state.
Recommended action
1. Touch the OK button to print the transferred data. Some data might be lost.
2. Check the host configuration.
41.02.00 Error
Description
A beam detect misprint error has occurred.
Recommended action
If the error persists, replace the laser/scanner assembly.
41.03.YZ Unexpected size in Tray <X>
Description
The product detected a different paper size than expected.
Y = Size mismatch, Z = Source
◦
Y = 0: Detected paper is longer or shorter than expected
◦
Y = A: Detected paper too long
◦
Y = B: Detected paper too short
◦
Z = 1: Tray 1
◦
Z = 2: Tray 2
◦
Z = 3: Tray 3
Recommended action
1. Make sure that the tray is loaded with the correct paper size and that the sliding paper guides are
correctly adjusted.
2. Use the Tray/Bin manual sensor test to verify that the tray paper switch is correctly functioning.
3. If the error persists, replace the lifter assembly.
220 Chapter 2 Solve problems ENWW