User Guide

50.WX.YZ Fuser error To continue turn off then on
Description
The product experienced a fuser error.
◦
W = fuser error code
◦
X = fuser mode
●
0: Photo paper 1, 2, 3, Designated paper 2, 3, or NA, typed or AutoSense
●
1: AutoSense (Normal special case distinguished from typed Normal)
●
2: Normal, typed (not AutoSense)
●
3: Light paper 1, 2, or 3, typed or AutoSense
●
4: Heavy paper 1, typed or AutoSense
●
5: Heavy paper 2, typed or AutoSense
●
6: Heavy paper 3, typed or AutoSense
●
7: Glossy paper 1, typed or AutoSense
●
8: Glossy paper 2, typed or AutoSense
●
9: Glossy paper 3, typed or AutoSense
●
A: Glossy film, typed or AutoSense
●
B: Transparency, typed or AutoSense
●
C: Label
●
D: Envelope1, Envelope2, or Envelope3
●
E: Rough (designated paper 1), typed or AutoSense
●
F: Reserved for future fuser mode
◦
Y = previous product sleep state
◦
Z = next product sleep state
●
0: Printing
●
1: Standby level 1 (no temperature control)
●
2: Standby level 2 (high temperature control)
●
3: Standby level 3 (middle temperature control)
●
4: Standby level 4 (low temperature control)
●
5: Middle sleep
222 Chapter 2 Solve problems ENWW