User Guide

52.XX.00 To continue turn off then on
Description
The laser/scanner experienced a startup error.
◦
XX = 00: Laser/scanner motor startup error
◦
XX = 20: Laser/scanner rotation error
Recommended action
1. Reconnect the connector on the laser/scanner driver PCA, and the connector on the DC controller
PCA.
2. Use the scanner motor drive test in the component tests to verify that the scanner motor is properly
functioning (listen for a high-pitched whine from the motor). If it is not, replace the laser/scanner.
3. If the error persists, replace the laser/scanner.
54.XX.YY Error
Description
A sensor error has occurred.
Recommended action
54.00.03: Environmental sensor failure
1. Turn the product off and then on.
2. If the environment sensor has been removed or replaced check the connector on the environment
sensor, and the connector on the DC controller PCA.
3. If the error persists, replace the environment sensor assembly.
54.00.04: Engine temperature sensor 1 abnormality warning
1. Turn the product off and then on.
55.XX.YY DC Controller error To continue turn off then on
Description
The communication link between the formatter and DC controller was lost.
◦
55.01.06 (event code): NVRAM memory data error warning
◦
55.02.06 (event code): NVRAM memory access error warning
Recommended action
1. Turn the product off, and then on.
2. If the error persists, replace the DC controller.
226 Chapter 2 Solve problems ENWW