User Guide

A CRC32 check did not pass.
◦
99.00.27 (event log)
An I/O error occurred while downloading the bundle.
Recommended action
Download the correct firmware RFU file, and then attempt the firmware upgrade again.
NOTE: Turn the product off, and then on again. Attempt the firware upgrade again. If the error
persists, try the sending the upgrade by using another method (USB or the HP Embedded Web Server).
99.09.60 Unsupported Disk
Description
The hard disk currently installed is not recognized or supported by the product.
Recommended action
Install the correct hard disk for this product.
99.09.61 Unsupported disk
Description
Preboot menu error. The installed disk is installed in a product configured for a encrypted hard disk.
Recommended action
Use the Lock Disk item in the Preboot menu to lock the disk.
99.09.64 Disk malfunction
Description
A fatal hard disk failure has occurred.
Recommended action
Replace the hard disk drive.
99.09.65 Disk data error
Description
A disk data corruption error has occurred.
Recommended action
Perform the Clean Disk procedure in the Preboot menu, and then attempt the firmware upgrade
again.
234 Chapter 2 Solve problems ENWW