User Guide

Table 2-4 Preboot menu options (4 of 6)
Menu option First level Second level Third level Description
Administrator
continued
Configure LAN Select the Configure LAN item to setup the network settings
for the PreBoot menu firmware upgrade.
The network can be configured obtain the network settings
from a DHCP server or as static.
IP Mode
[DHCP]
Use this item for automatic IP address acquisition from the
DHCP server.
IP Mode
[STATIC]
Use this item to manually assign the network addresses.
IP Address Use this item to manually enter the IP addresses.
Subnet Mask Use this item to manually enter the subnet mask.
Default
Gateway
Use this item to manually enter the default gateway.
Save Select the Save item to save the manual settings.
Table 2-5 Preboot menu options (5 of 6)
Menu option First level Second level Third level Description
Administrator
continued
Startup
Options
Select the Startup Options item to specify options that can be
set for the next time the product is turned on and initializes to
the Ready state.
Show Revision Not currently functional: Check the Show Revision item to allow
the product to initialize and show the firmware version when
the product reaches the Ready state.
Once the product power is turned on the next time, the Show
Revision item is unchecked so that the firmware revision is not
shown.
Cold Reset Check the Cold Reset item to clear the IP address and all
customer settings (this item also returns all settings to factory
defaults).
NOTE: Items in the Service menu are not reset.
Skip Disk Load Select the Skip Disk Load item to disable installed third-party
applications.
Skip Cal Select the Skip Cal item to initialize the product the next time
the power is turned on without calibrating.
Lock Service CAUTION: Select the Lock Service item to lock the Service
menu access (both in the preboot menu and the Device
Maintenance menu).
Service personnel must have the administrator remove the Lock
Service setting before they can open the Service menu.
Skip FSCK Select the Skip FSCK item to disable Chkdisk/ScanVolume
during startup.
ENWW
Preboot menu options
71