User Guide

Tray/bin manual sensor tests
Use this test to test paper-path sensors and the paper-size switches manually. The following illustrations
and table show the locations of these sensors.
1.
At the product control panel, press the Home
button.
2. Open the following menus:
●
Administration
●
Troubleshooting
●
Diagnostic Tests
●
Tray/Bin Manual Sensor Test
Table 2-11 Tray/bin manual sensor test
Sensor or switch
name
Sensor
number
Replacement
part number
Description Paper-path
sensor test name
Testing of sensor
Multipurpose tray
paper-presence
sensor
SR1 CN Multipurpose tray
paper-presence
sensor
SR1 Tray 1 paper Push the sensor lever
and hold it there for
3 seconds.
Tray 2 paper-
presence sensor
SR7 CN Tray 2 paper-
presence sensor
SR7 Tray 2 paper Remove Tray 2 and
Tray 3, and then
push the sensor lever
on the right side of
the tray cavity.
Tray 2 paper surface
sensor
SR10 CN Tray 2 paper
surface sensor
SR10 Tray 2 paper
surface
Remove Tray 2 and
Tray 3, and then
push the sensor at
the back of the tray
cavity.
Tray 2 paper size
switches
SW 4,
SW6
CN Tray 2 paper size
sensor
SW4, 6 Tray 2
Paper Size
Remove Tray 2 and
Tray 3, and then
push the switches at
the back of the tray
cavity.
Tray 3 paper-
presence sensor
SR5 CN Tray 3 paper-
presence sensor
SR5 Tray 3 paper Remove Tray 2 and
Tray 3, and then
push the sensor lever
on the right side of
the tray cavity.
Tray 3 paper surface
sensor
SR11 CN Tray 3 feeder unit SR11 Tray 3 paper
surface
Remove Tray 2 and
Tray 3, and then
push the sensor at
the back of the tray
cavity.
ENWW
Tools for troubleshooting
121