User Guide

Internal test pages
Clean the paper path
1.
At the product control panel, press the Home
button.
2. Open the following menus:
●
Device Maintenance
●
Calibration/Cleaning
●
Print Cleaning Page
3. The cleaning process can take several minutes. When it is finished, discard the printed page.
Set up an auto cleaning page
Use the procedure in this section to set up an automatic cleaning page.
1.
At the product control panel, press the Home
button.
2. Open the following menus:
●
Device Maintenance
●
Calibration/Cleaning
●
Auto Cleaning
3. Select the Enabled item, and then press the OK button.
4. Scroll to the Cleaning Interval option, and then press the OK button.
5. Scroll to the correct interval value, and then press the OK button.
6. Scroll to the Auto Cleaning Size option, and then press the OK button.
7. Scroll to the correct paper size option, and then press the OK button.
8.
Press the Home
button to return the product to the ready state.
174 Chapter 2 Solve problems ENWW