User Guide

USB storage device (control-panel menu)

1. Copy the xxxxxxx.bdl file to a portable USB flash drive.

2. Turn the product on, and then wait until it reaches the Ready state.

At the product control panel, press the Home

button.

4. Open the Device Maintenance menu.

5. Select the USB Firmware Upgrade item, and then press the OK button.

6. Insert the portable USB storage device with the xxxxxxx.bdl file on it into the USB port on the

front of the product, and then press the OK button.

7. Select the xxxxxxx.bdl file, and then press the OK button.

TIP: If there is more than one xxxxxxx.bdl file on the storage device, make sure that you

select the correct file for this product.

8. When the product prompts you to confirm the upgrade, press the OK button.

When the upgrade is complete, the product will initialize.

NOTE: The upgrade process can take up to 10 minutes to complete.

9. When the upgrade process is complete, print a configuration page and verify that the upgrade

firmware version was installed.

302 Chapter 2 Solve problems ENWW