Instruction Manual

2. Open the front cover of the MFP, rotate the green lever downward to the unlocked position, and
remove the print cartridge.
Figure 11-3 Clean the paper path (2 of 6)
CAUTION: To prevent damage to the print cartridge, use two hands when removing it from the
MFP. Do not expose the print cartridge to light for more than a few minutes. Cover the print cartridge
when it is outside of the MFP.
NOTE: If toner gets on your clothes, wipe it off with a dry cloth, and wash your clothes in cold
water. Hot water sets toner into fabric.
3. With a dry, lint-free cloth, wipe any residue from the paper path area, the registration roller, and
the print cartridge cavity.
Figure 11-4 Clean the paper path (3 of 6)
4. Replace the print cartridge.
Figure 11-5 Clean the paper path (4 of 6)
5. Rotate the green handle into the locked position.
Figure 11-6 Clean the paper path (5 of 6)
162 Chapter 11 Manage and maintain ENWW