Instruction Manual

Lines
Figure 12-73 Lines
A
A
A
A
A
B
B
B
B
B
C
C
C
C
C
a
a
a
a
a
c
c
c
c
c
b
b
b
b
b
A
A
A
A
A
B
B
B
B
B
C
C
C
C
C
a
a
a
a
a
c
c
c
c
c
b
b
b
b
b
1. Print a few more pages to see if the problem corrects itself.
2. Clean the inside of the device and run a cleaning page. See
Clean the MFP on page 161.
3. Replace the print cartridge.
Gray background
Figure 12-74 Gray background
1. Do not use media that has already been run through the device.
2. Try using a different type of media.
3. Print a few more pages to see if the problem corrects itself.
4. Turn over the stack in the tray. Also, try rotating the stack 180°.
5. Open the Administration menu at the device control panel. On the Print Quality menu, increase the
Toner Density setting. See
Print Quality menu on page 42.
6. Make sure that the environmental specifications for the device are being met. See
Operating
environment on page 236.
7. Replace the print cartridge.
210 Chapter 12 Problem solve ENWW