User Manual
Table Of Contents
- Product basics
- Software for Windows
- Use the product with Mac
- Connect the product
- Paper and print media
- Print tasks
- Cancel a print job
- Print with Windows
- Open the Windows printer driver
- Get help for any print option with Windows
- Change the number of print copies with Windows
- Print colored text as black with Windows
- Save custom print settings for reuse with Windows
- Improve print quality with Windows
- Print the first or last page on different paper with Windows
- Scale a document to fit page size with Windows
- Add a watermark to a document with Windows
- Print on both sides (duplex) with Windows
- Create a booklet with Windows
- Print multiple pages per sheet with Windows
- Select page orientation with Windows
- Use HP ePrint
- Manage and maintain
- Solve problems
- Supplies and accessories
- Service and support
- Specifications
- Regulatory information
- FCC regulations
- Environmental product stewardship program
- Protecting the environment
- Ozone production
- Power consumption
- Toner consumption
- Paper use
- Plastics
- HP LaserJet print supplies
- Return and recycling instructions
- Paper
- Material restrictions
- Disposal of waste equipment by users in private households in the European Union
- Chemical substances
- Material Safety Data Sheet (MSDS)
- For more information
- Declaration of conformity
- Safety statements
- Index
Dropouts
●
A single sheet of media might be defective. Try reprinting
the job.
●
The media moisture content is uneven or the media has
moist spots on its surface. Try printing with new media.
●
The media lot is bad. The manufacturing processes can
cause some areas to reject toner. Try a different type or
brand of media.
●
Place the product in quiet mode, and send the print job
again. See
Quiet mode settings on page 59.
●
The print cartridge might be defective. Install a new
genuine HP print cartridge.
Vertical lines
The photosensitive drum inside the print cartridge has
probably been scratched. Install a new genuine HP print
cartridge.
Gray background
●
Change the media to a lighter basis weight.
●
Check the product's environment. Very dry (low humidity)
conditions can increase the amount of background
shading.
●
The density setting might be too high. Adjust the density
setting.
●
Install a new genuine HP print cartridge.
ENWW
Solve image-quality problems
97