User Manual
Table Of Contents
- Product basics
- Software for Windows
- Use the product with Mac
- Connect the product
- Paper and print media
- Print tasks
- Cancel a print job
- Print with Windows
- Open the Windows printer driver
- Get help for any print option with Windows
- Change the number of print copies with Windows
- Print colored text as black with Windows
- Save custom print settings for reuse with Windows
- Improve print quality with Windows
- Print the first or last page on different paper with Windows
- Scale a document to fit page size with Windows
- Add a watermark to a document with Windows
- Print on both sides (duplex) with Windows
- Create a booklet with Windows
- Print multiple pages per sheet with Windows
- Select page orientation with Windows
- Use HP ePrint
- Manage and maintain
- Solve problems
- Supplies and accessories
- Service and support
- Specifications
- Regulatory information
- FCC regulations
- Environmental product stewardship program
- Protecting the environment
- Ozone production
- Power consumption
- Toner consumption
- Paper use
- Plastics
- HP LaserJet print supplies
- Return and recycling instructions
- Paper
- Material restrictions
- Disposal of waste equipment by users in private households in the European Union
- Chemical substances
- Material Safety Data Sheet (MSDS)
- For more information
- Declaration of conformity
- Safety statements
- Index
Wrinkles or creases
●
Make sure that media is loaded properly.
●
Check the media type and quality.
●
Turn over the stack of media in the tray. Also, try rotating
the media 180° in the input tray.
●
Place the product in quiet mode, and send the print job
again. See
Quiet mode settings on page 59.
●
For envelopes, this can be caused by air pockets inside
the envelope. Remove the envelope, flatten the envelope,
and try printing again.
Toner scatter outline
●
If large amounts of toner have scattered around the
characters, the transfer of toner to the media is not
optimal (a small amount of toner scatter is normal for
laser printing). Try a different media type setting in the
printer driver, or use a different media type.
●
Turn over the stack of media in the tray.
●
Use media that is designed for laser printers.
●
Place the product in quiet mode, and send the print job
again. See
Quiet mode settings on page 59.
100 Chapter 8 Solve problems ENWW