User Manual
Table Of Contents
- Product basics
- Software for Windows
- Use the product with Mac
- Connect the product
- Paper and print media
- Print tasks
- Cancel a print job
- Print with Windows
- Open the Windows printer driver
- Get help for any print option with Windows
- Change the number of print copies with Windows
- Print colored text as black with Windows
- Save custom print settings for reuse with Windows
- Improve print quality with Windows
- Print the first or last page on different paper with Windows
- Scale a document to fit page size with Windows
- Add a watermark to a document with Windows
- Print on both sides (duplex) with Windows
- Create a booklet with Windows
- Print multiple pages per sheet with Windows
- Select page orientation with Windows
- Use HP ePrint
- Manage and maintain
- Solve problems
- Supplies and accessories
- Service and support
- Specifications
- Regulatory information
- FCC regulations
- Environmental product stewardship program
- Protecting the environment
- Ozone production
- Power consumption
- Toner consumption
- Paper use
- Plastics
- HP LaserJet print supplies
- Return and recycling instructions
- Paper
- Material restrictions
- Disposal of waste equipment by users in private households in the European Union
- Chemical substances
- Material Safety Data Sheet (MSDS)
- For more information
- Declaration of conformity
- Safety statements
- Index
Set or change the network password
Use the embedded Web server to set a network password or change an existing password.
1. Open the embedded Web server, click the Networking tab, and click the Password link.
NOTE: If a password has previously been set, you are prompted to type the password. Type the
password, and then click the Apply button.
2. Type the new password in the Password box and in the Confirm Password box.
3. At the bottom of the window, click the Apply button to save the password.
IP address
The product IP address can be set manually, or it can be configured automatically using DHCP, BootP,
or AutoIP.
To change the IP address manually, use the Networking tab in the HP Embedded Web Server.
Link speeds and duplex settings
NOTE: In this section duplex refers to bi-directional communication, not two-sided printing.
Use the Networking tab in the embedded Web server to set the link speed if necessary.
Incorrect changes to the link speed setting might prevent the product from communicating with other
network devices. For most situations, leave the product in automatic mode. Changes can cause the
product to turn off, and then on. Make changes only when the product is idle.
30 Chapter 4 Connect the product ENWW