LASERJET PRO CP1520 COLOR PRINTER SERIES Benutzerhandbuch
HP LaserJet Pro CP1520 Color Printer Series Benutzerhandbuch
Copyright und Lizenz Marken © 2010 Copyright Hewlett-Packard Development Company, L.P. Adobe®, Acrobat® und PostScript® sind Marken von Adobe Systems Incorporated. Die Vervielfältigung, Adaption oder Übersetzung ist ohne vorherige schriftliche Genehmigung nur im Rahmen des Urheberrechts zulässig. Intel® Core™ ist ein Warenzeichen der Intel Corporation in den USA und anderen Ländern/Regionen. Die in diesem Dokument enthaltenen Informationen können ohne Vorankündigung geändert werden.
Konventionen dieses Handbuchs TIPP: Tipps bieten hilfreiche Hinweise oder Arbeitserleichterungen. HINWEIS: Anmerkungen enthalten wichtige Informationen zur Erläuterung eines Konzepts oder Durchführung einer Aufgabe. ACHTUNG: Die Rubrik „Achtung“ weist auf zu befolgende Verfahren hin, um den Verlust von Daten und Geräteschäden zu vermeiden.
iv Konventionen dieses Handbuchs DEWW
Inhaltsverzeichnis 1 Grundlegende Produktinformationen ........................................................................................................... 1 Produktvergleich ................................................................................................................................... 2 Umwelteigenschaften ........................................................................................................................... 3 Barrierefreiheit ................................
4 Verwenden des Geräts mit einem Mac ....................................................................................................... 27 Software für Mac ................................................................................................................................ 28 Unterstützte Betriebssysteme (Macintosh) ........................................................................ 28 Unterstützte Druckertreiber für Mac ..................................................................
Installieren des Geräts in einem drahtgebundenen Netzwerk ........................................... 42 Abrufen der IP-Adresse ..................................................................................... 42 Installieren der Software ................................................................................... 43 Anschließen des Geräts an ein drahtloses Netzwerk (nur drahtlose Modelle) .................. 43 Verbinden des Geräts mit einem drahtlosen Netzwerk über WPS ...................
Auswählen des Papierformats unter Windows .................................................. 70 Auswählen eines benutzerdefinierten Papierformats unter Windows ............... 70 Auswählen der Papiersorte unter Windows ...................................................... 71 Auswählen des Papierfachs unter Windows ..................................................... 71 Drucken auf beiden Seiten (Duplex) unter Windows .........................................................
PostScript ....................................................................................... 104 Netzwerkeinstellungen .................................................................................... 104 Verbrauchsmaterial kaufen ............................................................................. 104 Weitere Links .................................................................................................. 104 Zugreifen auf den integrierten HP Webserver .............................
Wiederherstellen der Werkseinstellungen ........................................................................................ 130 Interpretieren von Bedienfeldmeldungen ......................................................................................... 131 Meldungstypen des Bedienfeldes .................................................................................... 131 Bedienfeldmeldungen ......................................................................................................
Ihr Computer oder Ihre Arbeitsstation sind möglicherweise nicht richtig eingerichtet ...................................................................................................... 161 Das Gerät ist deaktiviert, oder die Netzwerkeinstellungen sind falsch ............ 161 Beheben von Problemen mit dem drahtlosen Netzwerk .................................................................. 162 Checkliste für die drahtlose Verbindung ........................................................................
Wiederverpacken des Geräts ........................................................................................................... 183 Anhang C Produktspezifikationen ............................................................................................................... 185 Physische Daten .............................................................................................................................. 186 Stromverbrauch, elektrische Spezifikationen und akustische Emissionen ........
Erklärung für Australien ................................................................................................... 202 ANATEL-Erklärung für Brasilien ...................................................................................... 202 Erklärungen für Kanada ................................................................................................... 202 Behördliche Mitteilung der europäischen Union ..............................................................
xiv DEWW
1 DEWW Grundlegende Produktinformationen ● Produktvergleich ● Umwelteigenschaften ● Barrierefreiheit ● Druckeransichten 1
Produktvergleich HP LaserJet Pro CP1520 Color Printer Series ● Druckt bis zu 12 Seiten pro Minute auf Papier im A4-Format im Modus Monochrom (Schwarzweiß) und 8 Seiten pro Minute im Farbmodus ● Bevorzugtes Zufuhrfach mit Einzelblatteinzug (Fach 1) und 150-Blatt-Kassette (Fach 2) ● Hi-Speed-USB 2.0-Anschluss ● Integrierte Netzwerkfunktion zum Herstellen einer Verbindung mit 10Base-T/100Base-TXNetzwerken Das Produkt ist in folgenden Konfigurationen erhältlich.
Umwelteigenschaften Manueller Duplexdruck Sparen Sie Papier mit dem manuellen Duplexdruck. Mehrere Seiten pro Blatt drucken Sparen Sie Papier, indem Sie zwei oder mehr Seiten eines Dokuments nebeneinander auf ein Blatt Papier drucken. Sie greifen über den Druckertreiber auf diese Funktion zu. Recycling Reduzieren Sie Abfälle. Verwenden Sie Recycling-Papier. Recyceln Sie Druckpatronen. Nutzen Sie dafür das Rückgabeprogramm von HP.
Barrierefreiheit Das Produkt verfügt über verschiedene Funktionen, die Benutzer bei Problemen mit dem Zugriff unterstützen. 4 ● Das Online-Benutzerhandbuch ist mit verschiedenen Anzeigeprogrammen kompatibel. ● Druckpatronen können mit einer Hand eingelegt und entnommen werden. ● Alle Klappen und Abdeckungen können mit einer Hand geöffnet werden.
Druckeransichten Vorderansicht 1 7 2 3 6 4 5 1 Ausgabefach (fasst 125 Blatt Standardpapier) 2 DIMM-Steckplatz (Dual Inline Memory Module) (für mehr Speicher) 3 Bedienfeld 4 Drahtlos-Taste und -LED (nur drahtloses Modell) 5 Fach 1 – bevorzugtes Zufuhrfach mit Einzelblatteinzug und Stauzugangsabdeckung 6 Fach 2 – 150-Blatt-Kassette 7 Vordere Klappe (Zugang zu den Druckpatronen) Rückansicht 2 1 3 4 1 DEWW High-Speed-USB 2.
Hintere Klappe (zur Staubehebung) 3 Netzschalter 4 Netzverbindung 1 Netzwerkanschluss (oben) 2 USB-Anschluss (unten) C Pr od Pr o. 2 n l N R 2 pa n ria B R Ja po Se N B of Ja C N uct du t C od ui D . A) R D ,5 C (2 A K LV 4 ~A 5A C B 71 A N 0V 2. -P DE 83 24 z, d H TT IN O re 07 0- 0 H tu 20 LE CH A 22 /6 ac 3, ID W 50 uf y E 1 , an ar H 31 E M nu 11 OIS Ja B SA U M 48 39 Q 7 o. 4 7 56 7 N 2334 34 4 7 ct 1 2 12 4 du R2 1 B 3 B 2 3 ro B 2 N P N BR 2 C 11 C N de O s: ce si s an is .
Bedienfeldanordnung 2 1 3 4 5 6 7 1 LED Bereit (grün): Die LED Bereit leuchtet, wenn das Gerät druckbereit ist. Sie blinkt, wenn Druckdaten empfangen werden. 2 Achtung-LED (gelb): Die Achtung-LED blinkt, wenn eine Druckpatrone leer ist oder das Produkt gewartet werden muss. HINWEIS: DEWW Wenn mehr als eine Druckpatrone leer ist, blinkt die Achtung-LED nicht. 3 Bedienfeldanzeige: Hier werden Informationen zum Gerät angezeigt. Mit den Menüs auf der Anzeige können Sie Produkteinstellungen festlegen.
8 6 Taste X: Drücken Sie diese Taste, um einen Druckjob abzubrechen, wenn die Achtung-LED blinkt, oder um die Bedienfeldmenüs zu verlassen. 7 Taste Zurück : Drücken Sie diese Taste, um folgende Aktionen ausführen: ● Die Bedienfeldmenüs verlassen. ● Zurück zu einem vorangegangenen Menü in einer Untermenüliste scrollen. ● Zurück zu einem vorangegangenen Menüeintrag in einer Untermenüliste scrollen (ohne Änderungen des Menüeintrags zu speichern).
2 DEWW Bedienfeldmenüs ● Menü Berichte ● Schnellformulare – Menü ● System-Setup – Menü ● Service – Menü ● Netzwerk-Setup – Menü 9
Menü Berichte Mit dem Menü Berichte können Sie Berichte mit Produktinformationen drucken. Menüoption Beschreibung Demoseite Druckt eine farbige Seite, mit der die Druckqualität überprüft werden kann. Menüstruktur Druckt eine Übersicht mit allen Menüoptionen des Bedienfelds. Die aktiven Einstellungen für jedes Menü sind aufgeführt. Konfig-Bericht Druckt eine Liste aller Produkteinstellungen. Wenn das Produkt mit einem Netzwerk verbunden ist, zählen dazu auch Netzwerkinformationen.
Schnellformulare – Menü Menüoption Untermenüoption Beschreibung Notizbuchpapier Schmale Linien Druckt Seiten mit vorgedruckten Zeilen Breite Linien Kinderregel Diagrammpapier 1/8 Zoll Druckt Seiten mit vorgedruckten Grafiklinien 5 mm Checkliste 1-Spalte Druckt Seiten mit vorgedruckten Zeilen und Kontrollkästchen 2-Spalte Notenpapier Hochformat Druckt Seiten mit vorgedruckten Zeilen zum Notieren von Noten Querformat DEWW Schnellformulare – Menü 11
System-Setup – Menü In der folgenden Tabelle werden die werkseitigen Standardeinstellungen mit einem Asterisk (*) gekennzeichnet. Menüoption Untermenüoption Untermenüoption Sprache Papier-Setup Beschreibung Wählen Sie die Sprache für die Bedienfeldanzeige und die Produktberichte aus. Std.- Papierformat Letter A4 Wählen Sie das Format zum Drucken interner Berichte und aller Druckjobs aus, für die kein Format festgelegt wird. Legal Std.- Papiersorte Zeigt eine Liste verfügbarer Papiersorten an.
Menüoption Untermenüoption Untermenüoption Beschreibung Druckqualität Farbkalibrierung Nach Einschalten Nach Einschalten: Legen Sie fest, zu welchem Zeitpunkt das Produkt kalibrieren soll, nachdem es eingeschaltet wurde. Die Standardeinstellung ist 15 Minuten. Jetzt kalibrieren Jetzt kalibrieren: Die Kalibrierung des Produkts wird sofort durchgeführt. Wenn gerade ein Auftrag bearbeitet wird, erfolgt die Kalibrierung des Produkts nach Beendigung des Druckvorgangs.
Menüoption Untermenüoption Untermenüoption Beschreibung Farbpatronen Stopp Aufforderung* Bestimmt, wie sich das Gerät verhält, wenn eine der Farbpatronen fast leer ist. Fortfahren ● Stopp: Der Druckvorgang wird unterbrochen und erst wieder gestartet, wenn die Druckpatrone ausgetauscht wurde. ● Aufforderung: Der Druckvorgang wird unterbrochen, und Sie werden aufgefordert, die Druckpatrone auszutauschen. Sie können die Aufforderung bestätigen und den Druckvorgang fortsetzen.
Service – Menü Mit diesem Menü können Sie Standardeinstellungen wiederherstellen, das Produkt reinigen und besondere Modi für die Druckausgabe aktivieren. Werkseitige Standardeinstellungen werden mit einem Asterisk (*) gekennzeichnet. Menüoption Untermenüoption Reinigungsseite Beschreibung Mit dieser Option können Sie das Produkt reinigen, wenn Sie bei der Druckerausgabe Tonerflecken oder andere Fehler feststellen. Beim Reinigungsvorgang werden Staub und Tonerreste aus dem Papierpfad entfernt.
Netzwerk-Setup – Menü Mit diesem Menü können Sie die Netzwerkkonfigurationseinstellungen festlegen. Menüoption Untermenüoption Beschreibung Drahtlos-Menü (nur drahtlose Geräte) WPS-Einrichtung Wenn diese Funktion von Ihrem drahtlosen Router unterstützt wird, verwenden Sie diese Methode, um das Gerät in einem drahtlosen Netzwerk einzurichten. Sie ist die einfachste. Netzwerktest ausführen Prüft das drahtlose Netzwerk und druckt einen Bericht mit den Ergebnissen.
3 DEWW Software für Windows ● Unterstützte Windows-Betriebssysteme ● Unterstützter Druckertreiber für Windows ● Auswählen des geeigneten Druckertreibers – Windows ● Ändern der Einstellungen für den Druckjob ● Ändern der Druckertreibereinstellungen – Windows ● Entfernen von Software – Windows ● Unterstützte Dienstprogramme – Windows ● Weitere Windows-Komponenten und -Dienstprogramme ● Software für andere Betriebssysteme 17
Unterstützte Windows-Betriebssysteme Das Gerät unterstützt die folgenden Windows-Betriebssysteme: 18 ● Windows XP (32 Bit, Service Pack 2) ● Windows Server 2003 (32 Bit, Service Pack 3) ● Windows Server 2008 (32 Bit und 64 Bit) ● Windows Vista (32 Bit und 64 Bit) ● Windows 7 (32 Bit und 64 Bit) Kapitel 3 Software für Windows DEWW
Unterstützter Druckertreiber für Windows ● HP PCL 6 (dies ist der standardmäßige Druckertreiber) ● HP Universal Print Driver für Windows Postcript ● HP Universal Print Driver für PCL 5 Die Druckertreiber enthalten eine Online-Hilfe, in der Sie Anweisungen zu allgemeinen Druckaufgaben sowie Beschreibungen zu Schaltflächen, Kontrollkästchen und Dropdown-Listen des Druckertreibers finden. HINWEIS: Weitere Informationen zum Universal Print Driver (UPD) finden Sie auf der Website www.hp.com/go/upd.
Auswählen des geeigneten Druckertreibers – Windows Druckertreiber ermöglichen den Zugriff auf die Gerätefunktionen und die Kommunikation des Computers mit dem Gerät (unter Verwendung einer Druckersprache). Hinweise zu weiterer Software und anderen Sprachen finden Sie in den Installationshinweisen und Readme-Dateien auf der im Lieferumfang des Produkts enthaltenen CD-ROM.
Ändern der Einstellungen für den Druckjob Tool zum Ändern der Einstellungen Methode zum Ändern der Einstellungen Dauer der Änderungen Hierarchie der Änderungen Einstellungen des SoftwareProgramms Klicken Sie im Menü „Datei“ des Softwareprogramms auf „Seite einrichten“ oder auf einen ähnlichen Befehl. Diese Einstellungen gelten nur für den derzeitigen Druckjob. Die hier geänderten Einstellungen überschreiben Einstellungen, die anderswo geändert wurden.
Ändern der Druckertreibereinstellungen – Windows Ändern der Einstellungen für alle Druckjobs, bis das Softwareprogramm geschlossen wird 1. Klicken Sie in der Anwendung im Menü Datei auf Drucken. 2. Wählen Sie den Treiber aus, und klicken Sie auf Eigenschaften oder Voreinstellungen. Dies ist die gängigste Vorgehensweise, wobei die Schritte im Einzelnen abweichen können. Ändern der Standardeinstellungen für alle Druckjobs 1.
Entfernen von Software – Windows Windows XP 1. Klicken Sie auf Start und anschließend auf Programme. 2. Klicken Sie auf HP und dann auf den Gerätenamen. 3. Klicken Sie auf Deinstallieren, und befolgen Sie die Bildschirmanweisungen, um die Software zu entfernen. Windows Vista und Windows 7 DEWW 1. Klicken Sie auf Start und anschließend auf Alle Programme. 2. Klicken Sie auf HP und dann auf den Gerätenamen. 3.
Unterstützte Dienstprogramme – Windows 24 ● HP Web Jetadmin ● Integrierter HP Webserver (Der Zugriff auf den HP Embedded Web Server, EWS, ist nur möglich, wenn das Gerät mit dem Netzwerk verbunden ist, nicht, wenn das Gerät über USB angeschlossen ist.
Weitere Windows-Komponenten und -Dienstprogramme DEWW ● Softwareinstallationsprogramm – automatisiert die Installation des Drucksystems ● Online-Webregistrierung Weitere Windows-Komponenten und -Dienstprogramme 25
Software für andere Betriebssysteme 26 Betriebssystem Software UNIX Den HP Jetdirect Printer Installer für UNIX für HP-UX- und Solaris-Netzwerke können Sie unter www.hp.com/support/net_printing herunterladen. Linux Informationen hierzu finden Sie unter www.hp.com/go/linuxprinting.
4 DEWW Verwenden des Geräts mit einem Mac ● Software für Mac ● Drucken mit Mac 27
Software für Mac Unterstützte Betriebssysteme (Macintosh) Der Drucker unterstützt die folgenden Macintosh-Betriebssysteme: ● Mac OS X 10.5, 10.6 und höher HINWEIS: Für Mac OS X 10.5 und höher werden Pocket PCs und Mac-Computer mit Intel® Core™-Prozessor unterstützt. Für Mac OS X 10.6 und höher werden Mac-Computer mit Intel Core-Prozessor unterstützt.
Installieren von Software für Mac-Computer in einem drahtgebundenen Netzwerk (IP) Abrufen der IP-Adresse 1. Schließen Sie das Netzwerkkabel an das Gerät und das Netzwerk an. 2. Warten Sie 60 Sekunden, bevor Sie fortfahren. In dieser Zeit erkennt das Netzwerk das Gerät und weist ihm eine IP-Adresse oder einen Hostnamen zu. 3. Drücken Sie auf dem Bedienfeld des Geräts die Taste OK. 4. Drücken Sie die Nach-rechts-Taste , um das Menü Berichte zu markieren, und drücken Sie dann die Taste OK. 5.
4. Klicken Sie auf der Glückwunschseite auf die Schaltfläche OK. 5. Drucken Sie in einer beliebigen Anwendung eine Seite, um zu prüfen, ob die Drucksoftware richtig installiert wurde. Installieren von Software für Mac-Computer in einem drahtlosen Netzwerk Stellen Sie vor der Installation der Gerätesoftware sicher, dass das Gerät nicht über ein Netzwerkkabel mit dem Netzwerk verbunden ist.
Verbinden des Geräts mit einem drahtlosen Netzwerk über WPS mit Hilfe der Bedienfeldmenüs Wenn Ihr drahtloser Router Wi-Fi Protected Setup (WPS) unterstützt, ist dies die einfachste Methode zur Einrichtung des Geräts in einem drahtlosen Netzwerk. 1. Drücken Sie auf der Vorderseite des Geräts die Taste „Drahtlos“. Überprüfen Sie auf dem Bedienfeld, ob die Option Drahtlos-Menü geöffnet wurde. Wenn sie nicht geöffnet wurde, führen Sie die folgenden Schritte aus: a.
3. Wählen Sie HP Deinstallationsprogramm aus. 4. Wählen Sie das Gerät in der Liste aus, und klicken Sie auf die Schaltfläche Deinstallieren. Ändern der Druckertreibereinstellungen für Mac Ändern der Einstellungen für alle Druckjobs, bis das Softwareprogramm geschlossen wird Ändern der Standardeinstellungen für alle Druckjobs Ändern der Konfigurationseinstellungen des Geräts 1. Klicken Sie im Menü Datei auf die Schaltfläche Drucken. 1. Klicken Sie im Menü Datei auf die Schaltfläche Drucken.
● Drucken Sie eine Konfigurationsseite. ● Rufen Sie bei Geräten, die mit einem IP-basierten Netzwerk verbunden sind, die Netzwerkinformationen ab, und öffnen Sie den integrierten HP Webserver. ● Konfigurieren Sie die Papiersorte und das Papierformat für das Fach. ● Übermitteln Sie Dateien und Schriftarten vom Computer zum Gerät. ● Führen Sie eine Aktualisierung der Geräte-Firmware aus. ● Rufen Sie die Farbverbrauchsseite auf.
Drucken mit Mac Abbrechen eines Druckjobs mit Mac 1. Wenn der Druckjob gerade gedruckt wird, brechen Sie ihn ab, indem Sie auf dem Bedienfeld des Geräts auf die Taste Abbrechen drücken. HINWEIS: Wenn Sie auf die Taste Abbrechen drücken, wird der aktuell verarbeitete Job gelöscht. Wenn mehrere Prozesse ausgeführt werden, können Sie auf die Taste Abbrechen drücken, um den zu diesem Zeitpunkt auf dem Bedienfeld des Geräts angezeigten Job zu löschen. 2.
Verwenden von Druckvoreinstellungen 1. Klicken Sie im Menü Datei auf die Option Drucken. 2. Wählen Sie den Treiber aus. 3. Wählen Sie im Menü Voreinstellungen die Druckvoreinstellung aus. HINWEIS: Wenn Sie die Standardeinstellungen des Druckertreibers verwenden möchten, wählen Sie die Option Standard aus. Ändern der Größe von Dokumenten oder Drucken in einem benutzerdefinierten Papierformat mit Mac Mac OS X 10.5 und 10.6 1. Klicken Sie im Menü Datei auf die Option Drucken.
5. Wählen Sie im Menü Text eine der Standardmitteilungen aus. Oder wählen Sie die Option Benutzerdefiniert aus, und geben Sie eine neue Mitteilung in das Feld ein. 6. Wählen Sie Optionen für die verbleibenden Einstellungen aus. Drucken mehrerer Seiten auf einem Blatt Papier mit Mac 1. Klicken Sie im Menü Datei auf die Option Drucken. 2. Wählen Sie den Treiber aus. 3. Öffnen Sie das Menü Layout. 4.
7. Legen Sie den Ausgabestapel in Fach 2 mit der Vorderseite nach oben und der Unterkante zuerst ein. Sie müssen die zweite Seite von Fach 2 aus drucken. 8. Wenn Sie dazu aufgefordert werden, drücken Sie die entsprechende Taste auf dem Bedienfeld, um fortzufahren. Einstellen der Farboptionen mit Mac Verwenden Sie das Menü Farboptionen oder das Menü Farb-/Qualitätsoptionen, um zu steuern, wie Farben aus Softwareprogrammen interpretiert und gedruckt werden. 1.
38 Kapitel 4 Verwenden des Geräts mit einem Mac DEWW
5 DEWW Anschließen des Produkts ● Unterstützte Betriebssysteme für Netzwerke ● Verbinden mit USB ● Anschließen an ein Netzwerk 39
Unterstützte Betriebssysteme für Netzwerke Die folgenden Betriebssysteme unterstützen das Drucken im Netzwerk: ● Windows 7 (32 Bit) ● Windows Vista (32 und 64 Bit) ● Windows Server 2008 ● Windows XP (32 Bit, Service Pack 2) ● Windows Server 2003 (32 Bit, Service Pack 3) ● Mac OS X 10.5, 10.6 und höher HINWEIS: Die meisten Netzwerkbetriebssysteme unterstützen eine vollständige Softwareinstallation.
Verbinden mit USB Dieses Produkt unterstützt eine USB 2.0-Verbindung. Verwenden Sie ein USB-Kabel vom Typ A auf B. HP empfiehlt die Verwendung eines Kabels, das nicht länger als 2 m ist. ACHTUNG: Schließen Sie das USB-Kabel erst an, wenn Sie von der Installationssoftware dazu aufgefordert werden. Installation von CD DEWW 1. Beenden Sie alle laufenden Programme auf dem Computer. 2. Installieren Sie die Software von der CD, und befolgen Sie die Anweisungen auf dem Bildschirm. 3.
Anschließen an ein Netzwerk Unterstützte Netzwerkprotokolle Für die Einbindung eines netzwerkfähigen Geräts in ein Netzwerk benötigen Sie ein Netzwerk, das mindestens eines der folgenden Protokolle verwendet. ● TCP/IP (IPv4 oder IPv6) ● Anschluss 9100 ● LPR ● DHCP ● AutoIP ● SNMP ● Bonjour ● SLP ● WSD ● NBNS ● LLMNR Installieren des Geräts in einem drahtgebundenen Netzwerk Abrufen der IP-Adresse 42 1. Schließen Sie das Netzwerkkabel an das Gerät und das Netzwerk an. 2.
6. Die IP-Adresse wird auf der Selbsttest-/Konfigurationsseite angezeigt. HP Color LaserJet CP4525 Printers Embedded Jetdirect Page Installieren der Software 1. Beenden Sie alle Programme auf dem Computer. 2. Installieren Sie die Software von der CD. 3. Befolgen Sie die Anweisungen auf dem Bildschirm. 4. Wählen Sie, wenn Sie dazu aufgefordert werden, die Option Verbindung über drahtgebundenes Netzwerk aus, und klicken Sie auf die Schaltfläche Weiter. 5.
Verbinden des Geräts mit einem drahtlosen Netzwerk über WPS Wenn Ihr drahtloser Router Wi-Fi Protected Setup (WPS) unterstützt, ist dies die einfachste Methode zur Einrichtung des Geräts in einem drahtlosen Netzwerk. 1. Drücken Sie auf Ihrem drahtlosen Router die Taste „WPS“. 2. Halten Sie die Taste Drahtlos auf dem Bedienfeld des Geräts zwei Sekunden lang gedrückt. Lassen Sie die Taste los, wenn die Drahtlos-LED zu blinken beginnt. 3.
drahtlosen Verbindung erleichtert. Sobald Sie mit der Einrichtung fertig sind, können Sie das USBKabel entfernen und die drahtlose Verbindung nutzen. 1. Legen Sie die Software-CD in das CD-Laufwerk des Computers ein. 2. Folgen Sie den Anleitungen auf dem Bildschirm. Wählen Sie die Option Verbindung über drahtloses Netzwerk aus, wenn Sie dazu aufgefordert werden. Schließen Sie das USB-Kabel an das Gerät an, wenn Sie dazu aufgefordert werden.
Reduzieren von Störungen in einem drahtlosen Netzwerk Mit den folgenden Tipps können Störungen in einem drahtlosen Netzwerk reduziert werden: ● Halten Sie die drahtlosen Geräte fern von großen Metallobjekten, wie Aktenschränken, oder anderen elektromagnetischen Geräten, wie Mikrowellen oder schnurlosen Telefonen. Die Funksignale können durch diese Objekte gestört werden. ● Halten Sie die drahtlosen Geräte fern von großen Mauer- oder anderen Baustrukturen.
Drahtloses InfrastrukturNetzwerk (empfohlen) Das Gerät kommuniziert über einen drahtlosen Router mit anderen Geräten des Netzwerks. Drahtloses Adhoc-Netzwerk Das Gerät kommuniziert ohne Verwendung eines drahtlosen Routers mit anderen drahtlosen Geräten. Alle Geräte des Adhoc-Netzwerks müssen über folgende Voraussetzungen verfügen: ● 802.11b/g-Kompatibilität ● Übereinstimmende SSID ● Übereinstimmendes Teilnetzwerk und gleicher Kanal ● Übereinstimmende 802.
Um den Zugriff anderer Benutzer auf Ihr Netzwerk zu verhindern, aktivieren Sie die WPA- oder WEPDatenverschlüsselung. ● Wired Equivalent Privacy (WEP): WEP ist der ursprüngliche Sicherheitsmechanismus des Standards 802.11. Sie erstellen einen eindeutigen Schlüssel mit Hexadezimalzeichen, der von anderen Benutzern eingegeben werden muss, bevor sie auf Ihr Netzwerk zugreifen können. ● Wi-Fi Protected Access (WPA): WPA verwendet das Temporal Key Integrity Protocol (TKIP) zur Verschlüsselung sowie die 802.
Abrufen oder Ändern der Netzwerkeinstellungen Sie können die IP-Konfigurationseinstellungen mit dem eingebetteten Webserver anzeigen und ändern. 1. Drucken Sie eine Konfigurationsseite, und suchen Sie auf dieser Seite die IP-Adresse. ● Wenn Sie IPv4 verwenden, besteht die IP-Adresse ausschließlich aus Ziffern. Hierbei gilt das folgende Format: xxx.xxx.xxx.xxx ● Bei IPv6 ist die IP-Adresse in Hexadezimalschreibweise angegeben, also als eine Kombination von Buchstaben und Ziffern.
Verbindungsgeschwindigkeit und Duplexmodus HINWEIS: Diese Informationen gelten nur für Ethernet-Netzwerke. Sie gelten nicht für drahtlose Netzwerke. HINWEIS: Wenn Sie die Einstellung für die Verbindungsgeschwindigkeit falsch festlegen, kann das Produkt u. U. nicht mehr mit den anderen Geräten im Netzwerk kommunizieren. Daher sollte in der Regel der automatische Modus aktiviert bleiben. Änderungen können dazu führen, dass sich das Gerät zunächst ausschaltet und dann wieder einschaltet.
6 DEWW Papier und Druckmedien ● Papierverwendung ● Anpassen des Druckertreibers für Papierformat und Papiersorte ● Unterstützte Papierformate ● Unterstützte Papiersorten ● Befüllen von Papierfächern 51
Papierverwendung Dieses Gerät unterstützt verschiedene Papierformate und andere Druckmedien, die den Richtlinien in diesem Handbuch entsprechen. Wenn Sie Papier oder Druckmedien verwenden, die nicht diesen Richtlinien entsprechen, kann dies zu einer schlechten Druckqualität, einer erhöhten Anzahl an Papierstaus und vorzeitiger Abnutzung des Geräts führen.
Medientyp Halten Sie sich an Folgendes Vermeiden Sie Folgendes Etiketten ● Verwenden Sie nur Etiketten, zwischen denen die Trägerfolie nicht frei liegt. ● Verwenden Sie keine Etiketten mit Knicken, Blasen oder anderen Beschädigungen. ● Verwenden Sie Etiketten, die flach aufliegen. ● Bedrucken Sie Etikettenbögen nicht teilweise. ● Verwenden Sie nur vollständige Etikettenbögen. ● Verwenden Sie nur Transparentfolien, die für die Verwendung in Farblaserdruckern zugelassen sind.
Anpassen des Druckertreibers für Papierformat und Papiersorte HINWEIS: Wenn Sie die Seiteneinstellungen im Softwareprogramm ändern, setzen diese Einstellungen alle Einstellungen des Druckertreibers außer Kraft. 54 1. Klicken Sie im Menü Datei in der Software auf Drucken. 2. Wählen Sie das Gerät aus, und klicken Sie auf Eigenschaften oder Voreinstellungen. 3. Klicken Sie auf die Registerkarte Papier/Qualität. 4. Wählen Sie in der Dropdown-Liste Papierformat ein Format aus. 5.
Unterstützte Papierformate Dieses Gerät unterstützt eine Vielzahl von Papierformaten und unterschiedlichen Papiersorten. HINWEIS: Sie erhalten optimale Druckergebnisse, wenn Sie vor dem Drucken das entsprechende Papierformat auswählen und den Druckertreiber angeben.
Tabelle 6-2 Unterstützte Briefumschläge und Postkarten (Fortsetzung) 56 Format Maße Umschlag B5 176 x 250 mm US-Umschlag Monarch 98 x 191 mm Kapitel 6 Papier und Druckmedien DEWW
Unterstützte Papiersorten Papiersorte Abmessungen1 Gewicht Kapazität2 Seitenausrichtung Papier, einschließlich folgender Sorten: Minimal: 76 x 127 mm 60 bis 90 g/m2 Fach 1: nur einzelnes Blatt Zu bedruckende Seite nach oben; Oberkante an der Rückseite des Fachs Maximal: 216 x 356 mm ● Normal Fach 2: bis zu 150 Blatt ● Briefkopf 75 g/m2 ● Farbe ● Vordruck ● Gelocht ● Recycling Dickes Papier Siehe Papier Bis zu 200 g/m2 Fach 1: nur einzelnes Blatt Zu bedruckende Seite nach oben; Ob
Befüllen von Papierfächern Einlegen von Papier in Fach 1 1. Legen Sie ein einzelnes Blatt Papier in Fach 1 ein, und richten Sie die Papierführungen am Blatt aus. 2. Führen Sie das Blatt so weit in das Fach ein, bis das Gerät das Papier einzieht. HINWEIS: Beenden Sie den Sparmodus, bevor Sie das Papier in Fach 1 einlegen. Bei aktiviertem Sparmodus wird das Papier in Fach 1 nicht eingezogen. Einlegen von Druckmedien in Fach 2 1. 58 Ziehen Sie das Fach aus dem Drucker heraus.
2. Öffnen Sie die Führungen für Papierlänge und -breite. 3. Um das Papierformat Legal einzulegen, vergrößern Sie das Fach, indem Sie die Verlängerungszunge gedrückt halten und gleichzeitig den vorderen Teil des Fachs nach außen ziehen. HINWEIS: Wenn das Fach mit Papier des Formats Legal befüllt ist, ist es gegenüber dem ursprünglichen Zustand um ca. 51 mm verlängert. 4. Legen Sie das Papier in das Fach ein, und stellen Sie sicher, dass es an allen vier Ecken flach aufliegt.
5. Drücken Sie auf das Papier, damit der Stapel ganz unter den Laschen für die maximale Füllhöhe an der Seite des Fachs liegt. 6. Schieben Sie das Fach in das Gerät. Konfigurieren von Fächern Standardmäßig zieht das Gerät Papier von Fach 1 ein. Wenn Fach 1 leer ist, zieht das Gerät Papier von Fach 2 ein. Durch Konfigurieren des Fachs bei diesem Gerät werden die Wärme- und Geschwindigkeitseinstellungen geändert, um die beste Druckqualität für die von Ihnen verwendete Papiersorte zu erhalten.
Konfigurieren der Fächer auf dem Bedienfeld 1. Vergewissern Sie sich, dass der Drucker eingeschaltet ist. 2. Führen Sie einen der folgenden Schritte aus: 3. DEWW ● Bedienfeld: Öffnen Sie das Menü System-Setup sowie das Menü Papier-Setup. Wählen Sie das Fach aus, das Sie konfigurieren möchten. ● Integrierter Webserver: Klicken Sie auf die Registerkarte Einstellungen und dann im linken Feld auf Papierzufuhr.
62 Kapitel 6 Papier und Druckmedien DEWW
7 DEWW Druckaufgaben ● Abbrechen eines Druckjobs ● Grundlegende Druckaufgaben unter Windows ● Weitere Druckaufgaben unter Windows 63
Abbrechen eines Druckjobs 1. Wenn der Druckjob gerade gedruckt wird, brechen Sie ihn ab, indem Sie auf dem Bedienfeld des Geräts auf die Taste Abbrechen drücken. HINWEIS: Wenn Sie auf die Taste Abbrechen drücken, wird der aktuell verarbeitete Job gelöscht. Wenn mehrere Prozesse ausgeführt werden, können Sie auf die Taste Abbrechen drücken, um den zu diesem Zeitpunkt auf dem Bedienfeld des Geräts angezeigten Job zu löschen. 2.
Grundlegende Druckaufgaben unter Windows Das Druckdialogfeld in einem Softwareprogramm kann auf verschiedene Weise geöffnet werden. Im Folgenden wird eine typische Methode beschrieben. Einige Softwareprogramme besitzen kein DateiMenü. Informieren Sie sich in der Dokumentation Ihres Softwareprogramms, wie sich das Druckdialogfeld öffnen lässt. Öffnen des Druckertreibers unter Windows 1. Klicken Sie im Menü Datei in der Software auf Drucken. 2.
Hilfe für Druckoptionen unter Windows 1. Klicken Sie auf Hilfe, um die Online-Hilfe zu öffnen. Ändern der Anzahl der Exemplare unter Windows 1. Klicken Sie im Menü Datei in der Software auf Drucken. 2. Wählen Sie das Gerät und anschließend die Anzahl der Exemplare aus. Speichern von benutzerdefinierten Druckeinstellungen für die erneute Verwendung unter Windows Verwenden einer Druckverknüpfung unter Windows 1. 66 Klicken Sie im Menü Datei in der Software auf Drucken.
2. Wählen Sie das Gerät aus, und klicken Sie auf Eigenschaften oder Voreinstellungen. 3. Klicken Sie auf die Registerkarte Druckverknüpfungen. 4. Wählen Sie eine der Verknüpfungen aus, und klicken Sie auf OK. HINWEIS: Wenn Sie eine Verknüpfung auswählen, werden die entsprechenden Einstellungen auf den anderen Registerkarten im Druckertreiber geändert.
Erstellen von Druckverknüpfungen 68 1. Klicken Sie im Menü Datei in der Software auf Drucken. 2. Wählen Sie das Gerät aus, und klicken Sie auf Eigenschaften oder Voreinstellungen. 3. Klicken Sie auf die Registerkarte Druckverknüpfungen.
4. Wählen Sie eine vorhandene Verknüpfung als Grundlage aus. HINWEIS: Wählen Sie immer zuerst eine Verknüpfung, bevor Sie eine der Einstellungen auf der rechten Bildschirmseite anpassen. Wenn Sie die Einstellungen anpassen und dann eine Verknüpfung auswählen, oder wenn Sie eine andere Verknüpfung auswählen, werden keine Ihrer Änderungen gespeichert. 5. Wählen Sie die Druckoptionen für die neue Verknüpfung aus.
6. Klicken Sie auf die Schaltfläche Speichern unter. 7. Geben Sie einen Namen für die Verknüpfung ein, und klicken Sie auf OK. Verbessern der Druckqualität unter Windows Auswählen des Papierformats unter Windows 1. Klicken Sie im Menü Datei in der Software auf Drucken. 2. Wählen Sie das Gerät aus, und klicken Sie anschließend auf Eigenschaften oder Voreinstellungen. 3. Klicken Sie auf die Registerkarte Papier/Qualität. 4. Wählen Sie in der Dropdown-Liste Papierformat ein Format aus.
5. Geben Sie einen Namen für das benutzerdefinierte Format ein, und geben Sie die Abmessungen an. ● Die Breite ist die kurze Kante des Papiers. ● Die Länge ist die lange Kante des Papiers. HINWEIS: Legen Sie das Papier immer mit der kurzen Seite zuerst in die Fächer ein. 6. Klicken Sie auf die Schaltfläche OK und dann auf der Registerkarte Papier/Qualität auf die Schaltfläche OK. Das benutzerdefinierte Format erscheint in der Liste der Papierformate, wenn Sie den Druckertreiber das nächste Mal öffnen.
72 2. Wählen Sie das Gerät aus, und klicken Sie anschließend auf Eigenschaften oder Voreinstellungen. 3. Klicken Sie auf die Registerkarte Fertigstellung. 4. Aktivieren Sie das Kontrollkästchen Beidseitiger Druck (manuell). Klicken Sie auf OK, um die erste Seite des Jobs zu drucken.
5. Nehmen Sie das bedruckte Papier aus dem Ausgabefach, ohne die Ausrichtung dabei zu ändern, und legen Sie es mit der bedruckten Seite nach unten in Fach 2 ein. 6. Drücken Sie auf dem Bedienfeld auf OK, um die zweite Seite des Jobs zu drucken. Drucken mehrerer Seiten pro Blatt unter Windows 1. Klicken Sie im Menü Datei in der Software auf Drucken.
74 2. Wählen Sie das Gerät aus, und klicken Sie anschließend auf Eigenschaften oder Voreinstellungen. 3. Klicken Sie auf die Registerkarte Fertigstellung.
4. Wählen Sie die Anzahl der Seiten pro Blatt aus der Dropdown-Liste Seiten pro Blatt aus. 5. Wählen Sie die entsprechenden Optionen Seitenränder drucken, Seitenordnung und Ausrichtung aus. Auswählen der Seitenausrichtung unter Windows 1. Klicken Sie im Menü Datei in der Software auf Drucken.
2. Wählen Sie das Gerät aus, und klicken Sie auf Eigenschaften oder Voreinstellungen. 3. Klicken Sie auf die Registerkarte Fertigstellung. 4. Wählen Sie im Bereich Ausrichtung die Option Hochformat oder Querformat aus. Um die Seite umgekehrt zu drucken, wählen Sie die Option Um 180 Grad drehen aus.
Festlegen von Farboptionen unter Windows DEWW 1. Klicken Sie im Menü Datei in der Software auf Drucken. 2. Wählen Sie das Gerät aus, und klicken Sie auf Eigenschaften oder Voreinstellungen. 3. Klicken Sie auf die Registerkarte Farbe. 4. Klicken Sie auf das Kontrollkästchen HP EasyColor, um die Markierung aufzuheben. 5. Klicken Sie im Bereich Farboptionen auf die Option Manuell und anschließend auf Einstellungen. 6.
Weitere Druckaufgaben unter Windows Drucken von farbigem Text in Schwarzweiß (Graustufen) unter Windows 1. Klicken Sie im Menü Datei in der Software auf Drucken. 2. Wählen Sie das Gerät aus, und klicken Sie anschließend auf Eigenschaften oder Voreinstellungen. 3. Klicken Sie auf die Registerkarte Erweitert. 4. Erweitern Sie den Bereich Dokumentoptionen. 5. Erweitern Sie den Bereich Druckerfunktionen. 6. Wählen Sie in der Dropdown-Liste Gesamten Text schwarz drucken die Option Aktiviert aus.
3. Klicken Sie auf die Registerkarte Papier/ Qualität. 4. Klicken Sie in der Dropdown-Liste Papiersorte auf die Option Sonstige.... 5. Erweitern Sie die Liste mit den Optionen Papiersorte:.
6. Erweitern Sie die Liste mit den Optionen Weitere. 7. Wählen Sie die Option für die verwendete Papiersorte aus, und klicken Sie auf OK. Drucken auf Spezialpapier, Aufklebern und Transparentfolien 1. 80 Klicken Sie im Menü Datei in der Software auf Drucken.
2. Wählen Sie das Gerät aus, und klicken Sie auf Eigenschaften oder Voreinstellungen. 3. Klicken Sie auf die Registerkarte Papier/ Qualität. 4. Wählen Sie in der Dropdown-Liste Papiersorte die Option Sonstige... aus.
5. Erweitern Sie die Liste mit den Optionen Papiersorte:. 6. Erweitern Sie die Kategorie der Papiersorten, die am besten zum gewünschten Papier passt. HINWEIS: Aufkleber und Transparentfolien finden Sie unter den weiteren Optionen. 7. 82 Wählen Sie die Option für die gewünschte Papiersorte aus, und klicken Sie auf OK.
Drucken der ersten oder letzten Seite auf anderem Papier unter Windows 1. Klicken Sie im Menü Datei in der Software auf Drucken. 2. Wählen Sie das Gerät aus, und klicken Sie anschließend auf Eigenschaften oder Voreinstellungen. 3. Klicken Sie auf die Registerkarte Papier/ Qualität.
84 4. Klicken Sie im Bereich Besondere Seiten auf die Option Seiten auf anderem Papier drucken und anschließend auf die Schaltfläche Einstellungen. 5. Wählen Sie im Bereich Seiten im Dokument die Option Zuerst oder Letzte aus. 6. Wählen Sie die entsprechenden Optionen aus den Dropdown-Listen Papierquelle und Papiersorte. Klicken Sie auf die Schaltfläche Hinzufügen.
7. Wenn Sie die erste und letzte Seite beide auf anderem Papier drucken, wiederholen Sie die Schritte 5 und 6, und wählen Sie die Optionen für die andere Seite aus. 8. Klicken Sie auf die Schaltfläche OK. Anpassen eines Dokuments auf Seitenformat 1. Klicken Sie im Menü Datei in der Software auf Drucken.
86 2. Wählen Sie das Gerät aus, und klicken Sie auf Eigenschaften oder Voreinstellungen. 3. Klicken Sie auf die Registerkarte Effekte. 4. Wählen Sie die Option Dokument drucken auf und anschließend aus der DropdownListe ein Format.
Hinzufügen eines Wasserzeichens zu einem Dokument unter Windows 1. Klicken Sie im Menü Datei in der Software auf Drucken. 2. Wählen Sie das Gerät aus, und klicken Sie auf Eigenschaften oder Voreinstellungen. 3. Klicken Sie auf die Registerkarte Effekte. 4. Wählen Sie ein Wasserzeichen aus der Dropdown-Liste Wasserzeichen aus. Oder klicken Sie auf die Schaltfläche Edit, wenn Sie der Liste ein neues Wasserzeichen hinzufügen möchten.
88 3. Klicken Sie auf die Registerkarte Fertigstellung. 4. Aktivieren Sie das Kontrollkästchen Beidseitiger Druck. 5. Wählen Sie in der Dropdown-Liste Broschürenlayout die Option Bindung links oder Bindung rechts aus. Die Option Seiten pro Blatt ändert sich automatisch in 2 Seiten pro Blatt.
6. Nehmen Sie das bedruckte Papier aus dem Ausgabefach, ohne die Ausrichtung dabei zu ändern, und legen Sie es mit der bedruckten Seite nach unten in Fach 2 ein. 7. Drücken Sie auf dem Bedienfeld auf OK, um die zweite Seite des Jobs zu drucken.
90 Kapitel 7 Druckaufgaben DEWW
8 DEWW Farbe ● Farbe anpassen ● Verwenden der HP EasyColor-Option für Windows ● Farbabstimmung 91
Farbe anpassen Sie können die Farbeinstellungen im Druckertreiber auf der Registerkarte Farbe festlegen. Ändern des Farbmotivs für einen Druckjob 1. Klicken Sie im Menü Datei des Softwareprogramms auf Drucken. 2. Wählen Sie die Option Eigenschaften oder Voreinstellungen aus. 3. Klicken Sie auf die Registerkarte Farbe. 4. Wählen Sie in der Dropdown-Liste Farbmotive ein Farbmotiv aus. ● Standard (sRGB): Mit diesem Motiv wird der Drucker angewiesen, RGB-Daten im RAWFormat des Geräts auszugeben.
3. Klicken Sie auf die Registerkarte Farbe. 4. Klicken Sie auf die Einstellung Automatisch oder Manuell. ● Einstellung Automatisch: Diese Einstellung ist für die meisten Farbdruckjobs geeignet. ● Einstellung Manuell: Mit dieser Einstellung können Sie die Farbeinstellungen unabhängig von anderen Einstellungen anpassen. HINWEIS: Manuelle Anpassungen der Farbeinstellungen können sich auf die Druckergebnisse auswirken. HP empfiehlt, dass diese Einstellungen nur von Farbgrafikexperten geändert werden. 5.
Tabelle 8-1 Manuelle Farboptionen (Fortsetzung) Beschreibung festlegen Optionen festlegen Halbton ● Die Option Glatt bietet bessere Druckergebnisse für große, stark bedruckte Bereiche und verbessert die Druckqualität für Fotos durch Glättung der Farbabstufungen. Wählen Sie diese Option aus, wenn Ihnen einheitlich und gleichmäßig bedruckte Bereiche wichtig sind.
Verwenden der HP EasyColor-Option für Windows Wenn Sie den HP PCL 6-Druckertreiber für Windows verwenden, optimiert die HP EasyColorTechnologie automatisch Dokumente mit gemischten Inhalten, die Sie aus Microsoft OfficeProgrammen drucken. Die Technologie überprüft Dokumente und passt Fotos im JPEG- oder PNGFormat automatisch an. Die HP EasyColor-Technologie optimiert das gesamte Bild auf einmal, statt es in verschiedene Teile aufzuteilen.
Farbabstimmung Das Anpassen der Druckerfarben an die Bildschirmfarben ist recht kompliziert, da Drucker und Computerbildschirme unterschiedliche Methoden zur Farbdarstellung verwenden. Auf Bildschirmen werden Farben mit Hilfe eines RGB-Farbverfahrens (Rot, Grün, Blau) durch Bildpunkte dargestellt, bei Druckern hingegen werden Farben mithilfe eines CMYK-Verfahrens (Cyan, Magenta, Gelb und Schwarz) gedruckt.
9 DEWW Verwaltung und Wartung ● Drucken von Informationsseiten ● Verwenden von HP ToolboxFX ● Zugreifen auf den integrierten HP Webserver ● Verwenden der HP Web Jetadmin-Software ● Funktionen für die Gerätesicherheit ● Sparsame Einstellungen ● Verwalten von Verbrauchsmaterial und Zubehör ● Reinigen des Geräts ● Produkt-Updates 97
Drucken von Informationsseiten Die Informationsseiten sind im Produkt gespeichert. Mit Hilfe dieser Seiten können Sie Probleme mit dem Produkt analysieren und beheben. HINWEIS: Wenn die Sprache des Produkts bei der Installation nicht richtig festgelegt wurde, kann sie manuell geändert werden, damit die Informationsseiten in einer der unterstützten Sprachen gedruckt werden. Ändern Sie die Sprache mit Hilfe des Menüs System-Setup auf dem Bedienfeld oder mit dem integrierten Webserver.
DEWW Menüoption Beschreibung Diagnoseseite Druckt die Kalibrierungs- und Farbdiagnoseseiten Druckqualität Druckt eine Testseite in Farbe, die zur Prüfung von Mängeln bei der Druckqualität hilfreich sein kann 1. Drücken Sie OK, um die Menüs zu öffnen. 2. Blättern Sie mit der Taste Nach links 3. Drücken Sie die Taste Nach links oder Nach rechts , um zum Bericht zu navigieren, den Sie drucken möchten. Drücken Sie anschließend OK, um den Bericht zu drucken. 4.
Verwenden von HP ToolboxFX HP ToolboxFX ist ein Programm, das für die folgenden Aufgaben eingesetzt werden kann: ● Prüfen des Gerätestatus ● Konfigurieren der Geräteeinstellungen ● Anzeigen von Informationen zur Fehlerbehebung Sie können das HP ToolboxFX-Programm anzeigen, wenn das Gerät direkt an Ihren Computer oder an das Netzwerk angeschlossen ist. Um das HP ToolboxFX-Programm verwenden zu können, müssen Sie eine empfohlene Softwareinstallation ausführen.
● Gerätekonfiguration. Auf dieser Seite werden ausführliche Informationen zur aktuellen Produktkonfiguration (u.a. Speichergröße und optionale Fächer) angezeigt. ● Netzwerkübersicht: Anzeigen einer umfassenden Beschreibung der aktuellen Netzwerkkonfiguration, z.B. IP-Adresse und Netzwerkstatus. ● Berichte. Drucken der Konfigurationsseite und anderer Informationsseiten, z. B. der Zubehörstatusseite. ● Farbnutz-Auftragspr.. Hier können Sie Farbnutzungsinformationen für das Produkt anzeigen.
Geräteinformationen Auf der Seite „Geräteinformationen“ werden Daten über das Produkt zur späteren Verwendung gespeichert. Die Informationen, die Sie in die Felder auf dieser Seite eingeben, werden auf der Konfigurationsseite angezeigt. In diese Felder kann jedes beliebige Zeichen eingegeben werden. HINWEIS: Klicken Sie auf Übernehmen, damit die Änderungen wirksam werden. Papier-Setup Verwenden Sie diese Optionen, um die Standardeinstellungen des Geräts zu konfigurieren.
Druckdichte Verwenden sie diese Einstellungen, um die Menge der einzelnen Tonerfarben genau anzupassen, die für die zu druckenden Dokumente verwendet werden soll. ● Kontraste: Kontraste sind der Bereich zwischen hellen und dunklen Farbtönen. Um den Gesamtbereich zwischen hellen und dunklen Farbtönen zu vergrößern, müssen Sie die Einstellung Kontraste erhöhen. ● Schlaglichter: Schlaglichter sind Farben, die beinahe weiß sind. Um helle Farbtöne dunkler zu machen, erhöhen Sie die Einstellung Schlaglichter.
HINWEIS: Klicken Sie auf Übernehmen, damit die Änderungen wirksam werden. PostScript Verwenden Sie diese Option, wenn die PostScript-Druckersprache verwendet wird. Wenn die Option Print PostScript error (PostScript-Fehler drucken) aktiviert ist, wird bei einem PostScript-Fehler automatisch die PostScript-Fehlerseite gedruckt. HINWEIS: Klicken Sie auf Übernehmen, damit die Änderungen wirksam werden.
Zugreifen auf den integrierten HP Webserver Dieses Produkt verfügt über einen integrierten Webserver (Embedded Web Server, EWS), mit dem Sie auf Informationen zu Produkten und Netzwerkaktivitäten zugreifen können. Ein Webserver bietet eine Umgebung für die Ausführung von Webprogrammen. Dies ist vergleichbar mit einem Betriebssystem wie Windows, das eine Umgebung für die Programmausführung auf einem Computer bildet.
● Netzwerkübersicht: Zeigt die Informationen der Netzwerkkonfigurationsseite an. ● Berichte: Auf dieser Seite können Sie die PCL-, PCL6-, PS-Schriftlisten und die vom Produkt erstellte Zubehörstatusseite drucken. ● Farbverbrauchsprotokoll: Zeigt Farbdruckaufträge von Benutzern nach Druckauftrag gestaffelt. ● Ereignisprotokoll: Zeigt eine Liste aller Produktereignisse und -fehler an. System (Registerkarte) Ermöglicht die Konfiguration des Produkts über Ihren Computer.
HINWEIS: Die Registerkarte Netzwerk kann durch ein Kennwort geschützt werden.
Verwenden der HP Web Jetadmin-Software HP Web Jetadmin ist eine webbasierte Softwarelösung zur Remote-Installation, zum Überwachen und Beheben von Fehlern bei Peripheriegeräten im Netzwerk. Die Verwaltung erfolgt proaktiv, so dass Netzwerkadministratoren die Möglichkeit zum Beheben von Problemen haben, noch bevor sich diese auf die Benutzer auswirken. Sie können diese erweiterte Verwaltungssoftware kostenlos von folgender Website herunterladen: www.hp.com/go/webjetadmin.
Funktionen für die Gerätesicherheit Das Gerät unterstützt Sicherheitsstandards und empfohlene Protokolle, mit denen Sie das Gerät sichern, kritische Informationen in ihrem Netzwerk schützen und die Überwachung und Verwaltung des Geräts vereinfachen können. Genaue Informationen zu den sicheren Imaging- und Drucklösungen von HP finden Sie unter www.hp.com/go/secureprinting. Die Site bietet Links zu Whitepaper- und FAQ-Dokumenten, die sich mit Sicherheitsmerkmalen beschäftigen.
Sparsame Einstellungen Energiesparmodi Mit dem ein- und ausschaltbaren Bereitschaftsmodus wird der Stromverbrauch des Druckers reduziert, wenn der Drucker über einen längeren Zeitraum nicht aktiv war. Sie können den Zeitraum einstellen, bevor das Gerät in den Bereitschaftsmodus versetzt wird. HINWEIS: Der Bereitschaftsmodus hat keinen Einfluss auf die Warmlaufzeit des Druckers. Einrichten des Bereitschaftsmodus 1. Drücken Sie auf dem Bedienfeld die Taste OK, und wählen Sie das Menü System-Setup aus. 2.
Verwalten von Verbrauchsmaterial und Zubehör Drucken nach Erreichen des geschätzten Endes der Gebrauchsdauer einer Druckpatrone Meldungen zum Verbrauchsmaterial Meldungen zum Verbrauchsmaterial werden auf dem Bedienfeld des Geräts sowie auf Computern mit vollständig installierter Gerätesoftware angezeigt. Wenn die Gerätesoftware nicht vollständig installiert wurde, werden die Meldungen zum Verbrauchsmaterial u. U. nicht deutlich erkennbar angezeigt.
4. Wählen Sie mit Hilfe der Pfeiltasten das Menü Schwarze Patrone oder das Menü Farbpatronen aus, und drücken Sie dann die Taste OK. 5. Folgende Optionen stehen zur Verfügung: ● Wählen Sie die Option Fortfahren aus, um eine Warnmeldung zu erhalten, wenn die Druckpatrone fast leer ist, der Druckvorgang jedoch fortgesetzt werden soll. ● Wählen Sie die Option Stopp aus, wenn der Druckvorgang so lange unterbrochen werden soll, bis die Druckpatrone ausgetauscht wurde.
Recycling von Verbrauchsmaterial Um eine HP Originaldruckpatrone dem Recycling zuzuführen, legen Sie die verbrauchte Druckpatrone in den Karton des neuen Zubehörs. Senden Sie das verbrauchte Material unter Verwendung des beigefügten Rücksendeetiketts zum Recycling an HP zurück. Vollständige Informationen finden Sie im Recyclingleitfaden, der jedem neuen HP Zubehör beigefügt ist. Layout der Druckpatronen 1 Speicherchip der Druckpatronen 2 Kunststoffschutz 3 Bildtrommel.
2. Ziehen Sie das Druckpatronenfach heraus. 3. Fassen Sie die Druckpatrone am Griff, und ziehen Sie sie gerade nach oben heraus. 4. Nehmen Sie die neue Druckpatrone aus der Verpackung.
5. Bewegen Sie die Druckpatrone vorsichtig vor und zurück, um den Toner gleichmäßig in der Druckpatrone zu verteilen. 6. Entfernen Sie den orangefarbigen Plastikschutz an der Unterseite der neuen Druckpatrone. 7. Berühren Sie nicht die Bildtrommel an der Unterseite der Druckpatrone. Fingerabdrücke auf der Bildtrommel können die Druckqualität beeinträchtigen.
8. Setzen Sie die neue Druckpatrone in das Gerät ein. 9. Ziehen Sie die Lasche links an der Druckpatrone gerade nach oben, und ziehen Sie die Schutzfolie ganz ab. Entsorgen Sie die Schutzfolie. 10. Schließen Sie das Druckpatronenfach.
11. Schließen Sie die vordere Klappe. 12. Legen Sie die gebrauchte Druckpatrone und die orange Kunststoffschutzabdeckung in den Karton, in dem die neue Druckpatrone verpackt war. Befolgen Sie zum Recycling die Anleitung, die der Verpackung beiliegt. Installieren von DIMM-Speichermodulen Dieses Gerät enthält 64 Megabyte (MB) Arbeitsspeicher. Sie können für das Gerät bis zu 256 Megabyte Speicher installieren, indem Sie ein DIMM (Dual Inline Memory Module) hinzufügen.
3. Um ein installiertes DIMM zu ersetzen, drücken Sie die Laschen an den beiden Seiten des DIMM-Steckplatzes auseinander, heben Sie das DIMM leicht angewinkelt an, und ziehen Sie es heraus. 4. Nehmen Sie das neue DIMM aus der antistatischen Verpackung, und suchen Sie nach der Ausrichtungseinkerbung an der Unterkante des DIMMs. 5. Halten Sie das DIMM-Modul an den Seiten, und halten Sie es so, dass die Kerben auf dem DIMM-Modul mit der Halterung im DIMM-Steckplatz im selben Winkel ausgerichtet sind.
6. Drücken Sie das DIMM-Modul nach unten, bis beide Kerben des DIMM-Moduls einrasten. Wenn die Installation korrekt war, sind die Metallkontakte nicht sichtbar. HINWEIS: Wenn sich Schwierigkeiten beim Einsetzen des DIMMs ergeben, sollten Sie sich vergewissern, dass die Einkerbung an der Unterseite des DIMMs an der Führung im Steckplatz ausgerichtet ist. Wenn sich das DIMM weiterhin nicht einsetzen lässt, sollten Sie sicherstellen, dass Sie den richtigen DIMM-Typ verwenden. DEWW 7.
Aktivieren des Speichers Windows XP, Windows Server 2003, Windows Server 2008 und Windows Vista 1. Klicken Sie auf Start. 2. Klicken Sie auf Einstellungen. 3. Klicken Sie auf Drucker und Faxgeräte (im Standard-Startmenü) oder auf Drucker (im klassischen Startmenü). 4. Klicken Sie mit der rechten Maustaste auf das Gerätetreibersymbol, und wählen Sie Eigenschaften aus. 5. Klicken Sie auf das Register Geräteeinstellungen. 6. Erweitern Sie den Bereich Installierbare Optionen. 7.
Prüfen der DIMM-Installation Vergewissern Sie sich nach der Installation des DIMM-Moduls, dass der Vorgang erfolgreich war. 1. Schalten Sie das Gerät ein. Überprüfen Sie, ob die Bereitschaftsanzeige leuchtet, nachdem der Startvorgang abgeschlossen ist. Wenn eine Fehlermeldung angezeigt wird, wurde das DIMMModul möglicherweise falsch installiert. 2. Drucken Sie eine Konfigurationsseite. 3.
Reinigen des Geräts Während des Druckvorgangs können sich Papier-, Toner- und Staubpartikel im Gerät ansammeln. Nach einer gewissen Zeit kann dies zu Problemen mit der Druckqualität führen, wie z.B. Tonerflecken oder verschmierter Toner. Dieses Gerät besitzt einen Reinigungsmodus, mit dem diese Probleme beseitigt und verhindert werden können. 1. Drücken Sie auf dem Bedienfeld des Geräts die Taste OK. 2.
Produkt-Updates Software- und Firmware-Updates und Installationsanleitungen für diesen Drucker stehen unter www.hp.com/support/ljcp1520series zur Verfügung. Klicken Sie auf Downloads und Treiber, klicken Sie auf das Betriebssystem, und wählen Sie das gewünschte Download für den Drucker.
124 Kapitel 9 Verwaltung und Wartung DEWW
10 Lösen von Problemen DEWW ● Selbstständige Behebung ● Checkliste für die Fehlerbehebung ● Faktoren, die sich auf die Leistung des Geräts auswirken ● Wiederherstellen der Werkseinstellungen ● Interpretieren von Bedienfeldmeldungen ● Das Papier wird falsch eingezogen oder staut sich ● Lösen von Problemen mit der Bildqualität ● Das Gerät druckt nicht oder nur langsam ● Lösen von Verbindungsproblemen ● Beheben von Problemen mit dem drahtlosen Netzwerk ● Beheben von Softwareproblemen 12
Selbstständige Behebung Neben den Informationen in dieser Anleitung stehen auch weitere Quellen mit hilfreichen Informationen zur Verfügung. HP Help and Learn Center Das HP Help and Learn Center sowie weitere Dokumentation befindet sich auf der CD, die dem Gerät beiliegt, oder im HP Programmordner auf Ihrem Computer.
Checkliste für die Fehlerbehebung 1. 2. Vergewissern Sie sich, dass der Drucker ordnungsgemäß konfiguriert ist. a. Drücken Sie die Einschalttaste, um den Drucker einzuschalten, oder deaktivieren Sie den Auto-Aus-Modus. b. Vergewissern Sie sich, dass das Netzkabel an beiden Enden richtig eingesteckt ist. c. Stellen Sie sicher, dass die richtige Netzspannung für das Gerät vorliegt. (Beachten Sie die Hinweise zu den Spannungsanforderungen auf der Rückseite des Geräts.
9. c. Wenn sich die Blätter im Produkt stauen, beheben Sie den Papierstau. d. Wenn die Druckqualität nicht akzeptabel ist, führen Sie die folgenden Schritte durch: ● Stellen Sie sicher, dass die Druckeinstellungen für das von Ihnen verwendete Papier korrekt sind. ● Lösen von Problemen mit der Druckqualität Drucken Sie ein kurzes Dokument in einem anderen Programm, mit dem Sie bereits früher erfolgreich gedruckt haben.
Faktoren, die sich auf die Leistung des Geräts auswirken Mehrere Faktoren bestimmen, wie lange das Drucken eines Auftrags dauert: DEWW ● Verwendung von speziellem Papier (z.B.
Wiederherstellen der Werkseinstellungen Beim Wiederherstellen der werkseitigen Standardeinstellungen werden alle Geräte- und Netzwerkeinstellungen auf den ursprünglichen Zustand zurückgesetzt. Die Seitenanzahl, das Fachformat und die Sprache werden nicht zurückgesetzt. Führen Sie zum Wiederherstellen der werkseitigen Standardeinstellungen für das Gerät die folgenden Schritte aus.
Interpretieren von Bedienfeldmeldungen Meldungstypen des Bedienfeldes Die Bedienfeldmeldungen zeigen den aktuellen Gerätestatus an oder weisen auf Situationen hin, die möglicherweise das Ergreifen von Maßnahmen erfordern. Mitteilungen und Warnmeldungen werden nur vorübergehend angezeigt und müssen möglicherweise bestätigt werden, indem Sie auf die Taste OK drücken, um den Job fortzusetzen, oder auf die Taste „Abbrechen “, um den Job abzubrechen.
Bedienfeldmeldung Statuswarnmeldung 10.XXXX Verbrauchsmaterialfehler Beschreibung Empfohlene Vorgehensweise Das elektronische Etikett der Druckpatronen fehlt oder kann nicht gelesen werden. Setzen Sie die Druckpatrone wieder ein. ● 49 Fehler Aus, dann Ein 10.0000 = Fehler im elektronischen Etikett für Schwarz ● 10.0001 = Fehler im elektronischen Etikett für Zyan ● 10.0002 = Fehler im elektronischen Etikett für Magenta ● 10.0003 = Fehler im elektronischen Etikett für Gelb ● 10.
Bedienfeldmeldung 50.X Fixierfehler Statuswarnmeldung Beschreibung Empfohlene Vorgehensweise Der Drucker hat einen Fehler in der Fixiereinheit festgestellt. Schalten Sie das Produkt aus, warten Sie mindestens 30 Sekunden, schalten Sie das Produkt wieder ein und lassen Sie es die Initialisierung durchführen. Aus, dann Ein Schalten Sie das Produkt aus, warten Sie mindestens 25 Minuten, und schalten Sie es dann wieder ein. Wenn Sie einen Überspannungsschutz verwenden, entfernen Sie ihn.
Bedienfeldmeldung Statuswarnmeldung 55.X Fehler Beschreibung Empfohlene Vorgehensweise Der Drucker hat einen internen Fehler festgestellt. Schalten Sie das Produkt aus, warten Sie mindestens 30 Sekunden, schalten Sie das Produkt wieder ein und lassen Sie es die Initialisierung durchführen. Aus, dann Ein Wenn Sie einen Überspannungsschutz verwenden, entfernen Sie ihn. Schließen Sie den Drucker direkt an die Wandsteckdose an. Schalten Sie das Produkt ein.
Bedienfeldmeldung 79 Fehler Statuswarnmeldung Beschreibung Empfohlene Vorgehensweise Ein interner Firmwarefehler ist aufgetreten. Schalten Sie das Produkt aus, warten Sie mindestens 30 Sekunden, schalten Sie das Produkt wieder ein und lassen Sie es die Initialisierung durchführen. Aus, dann Ein Wenn Sie einen Überspannungsschutz verwenden, entfernen Sie ihn. Schließen Sie den Drucker direkt an die Wandsteckdose an. Schalten Sie das Produkt ein.
Bedienfeldmeldung Statuswarnmeldung Beschreibung Empfohlene Vorgehensweise Fach Nr. laden Es ist ein Fach für die vom Druckjob angeforderten Papiereinstellungen (Typ und Format) konfiguriert. Das Fach ist jedoch leer. Legen Sie das richtige Papier in das Fach ein, oder drücken Sie OK, um Papier in einem anderen Fach zu verwenden. Falsches Format in Fach Nr. Das Gerät hat Papier im Fach erkannt, das nicht mit der Fachkonfiguration übereinstimmt.
Bedienfeldmeldung Statuswarnmeldung Beschreibung Empfohlene Vorgehensweise HP OriginalVerbrauchsmaterial eingesetzt HP Original-Verbrauchsmaterial wurde eingesetzt. Diese Meldung erscheint, kurz nachdem das Verbrauchsmaterial eingesetzt wurde, und wird dann durch die Meldung Bereit ersetzt. Keine Aktion erforderlich. Magenta in falscher Position Eine Druckpatrone wurde in den falschen Schacht eingesetzt. Überprüfen Sie, ob sich die einzelnen Druckpatronen im richtigen Schacht befinden.
Bedienfeldmeldung Statuswarnmeldung Nicht unterstützte [Farbe] in Verw. Beschreibung Empfohlene Vorgehensweise Das Gerät hat ermittelt, dass eine nicht von HP hergestellte Druckpatrone eingesetzt wurde. Berühren Sie zum Fortfahren die Schaltfläche OK. Falls Sie der Meinung sind, ein HP Verbrauchsmaterial gekauft zu haben, rufen Sie die HP Hotline für Produktpiraterie (+1-877-219-3183) an.
Bedienfeldmeldung Niedriger Tintenstand Magenta Statuswarnmeldung Beschreibung Empfohlene Vorgehensweise Die Druckpatrone hat das Ende ihrer Gebrauchsdauer fast erreicht, und für die Menüoption Fast leer im Menü SystemSetup ist Fortfahren festgelegt. Damit eine optimale Druckqualität gewährleistet ist, empfiehlt HP das Ersetzen der Druckpatrone zu diesem Zeitpunkt. Sie können weiterhin drucken, bis Sie eine Verschlechterung der Druckqualität bemerken.
Bedienfeldmeldung Statuswarnmeldung Niedriger Tintenstand Zyan Beschreibung Empfohlene Vorgehensweise Die Druckpatrone hat das Ende ihrer Gebrauchsdauer fast erreicht, und für die Menüoption Fast leer im Menü SystemSetup ist Fortfahren festgelegt. Damit eine optimale Druckqualität gewährleistet ist, empfiehlt HP das Ersetzen der Druckpatrone zu diesem Zeitpunkt. Sie können weiterhin drucken, bis Sie eine Verschlechterung der Druckqualität bemerken.
Bedienfeldmeldung Statuswarnmeldung Beschreibung Empfohlene Vorgehensweise Schwarz in falscher Position Die Druckpatrone wurde in den falschen Schacht eingesetzt. Überprüfen Sie, ob sich die einzelnen Druckpatronen im richtigen Schacht befinden. Die Druckpatronen sind in der folgenden Reihenfolge eingesetzt (von vorn nach hinten): Schwarz, Cyan, Magenta, Gelb. Stau in Der Drucker hat einen Stau festgestellt. Beseitigen Sie den Stau im angegebenen Bereich. Der Auftrag wird fortgesetzt.
Bedienfeldmeldung Statuswarnmeldung Zu wenig Speicher Beschreibung Empfohlene Vorgehensweise Der Produktspeicher ist fast voll. Drücken Sie zum Fortsetzen des Jobs OK. Wenn Sie den Vorgang abbrechen möchten, drücken Sie X. [OK] drücken Teilen Sie den Auftrag in kleinere Aufträge mit weniger Seiten auf. Zyan in falscher Position Eine Druckpatrone wurde in den falschen Schacht eingesetzt. Überprüfen Sie, ob sich die einzelnen Druckpatronen im richtigen Schacht befinden.
Das Papier wird falsch eingezogen oder staut sich ● Das Gerät zieht kein Papier ein ● Das Gerät zieht mehrere Blatt Papier ein. ● Vermeiden von Papierstaus ● Beheben von Staus Das Gerät zieht kein Papier ein Wenn das Gerät kein Papier aus dem Fach einzieht, versuchen Sie folgende Lösungsansätze. 1. Öffnen Sie das Gerät, und entfernen Sie gegebenenfalls gestautes Papier. 2. Legen Sie Papier mit dem richtigen Format für Ihren Job in das Fach ein. 3.
4. Vergewissern Sie sich, dass das Fach nicht zu voll ist. Wenn dies der Fall ist, nehmen Sie den gesamten Papierstapel aus dem Fach, richten Sie den Stapel aus, und legen Sie einen Teil des Papiers erneut in das Fach ein. 5. Stellen Sie sicher, dass die Papierführungen im Fach auf das Format des Papiers ausgerichtet sind. Stellen Sie die Papierführungen so ein, dass sie den Papierstapel leicht berühren. Das Papier darf sich nicht verbiegen. 6.
2. Wenn Sie das gestaute Papier nicht sehen können, öffnen Sie die Fach 1-Klappe, und ziehen sie Fach 2 heraus. 3. Drücken Sie die beiden Laschen nach unten, um das Fach 1-Feld zu entriegeln. 4. Ziehen Sie das eingeklemmte Blatt gerade heraus. ACHTUNG: Ziehen Sie das gestaute Papier nicht nach oben heraus. Ziehen Sie es gerade heraus.
5. Drücken Sie die beiden Laschen nach oben, um das Fach 1-Feld zu verriegeln. 6. Ersetzen Sie Fach 2. Stau in Fach 2 1. Ziehen Sie Fach 2 heraus und stellen Sie es auf einer ebenen Fläche ab.
2. Ziehen Sie das eingeklemmte Blatt gerade heraus. 3. Schieben Sie Fach 2 wieder ein. 4. Drücken Sie OK, um den Druckvorgang fortzusetzen. Stau im Bereich der Fixiereinheit 1. Öffnen Sie die hintere Klappe.
2. Entfernen Sie die gestauten Blätter. HINWEIS: Wenn Papier gerissen ist, müssen alle Einzelteile entfernt werden, bevor der Druckvorgang fortgesetzt wird. ACHTUNG: Warten Sie, bis sich der Bereich der Fixiereinheit abgekühlt hat, bevor Sie den Papierstau beseitigen. 3. Schließen Sie die hintere Klappe. Stau im Ausgabefach 1. Überprüfen Sie, ob sich gestautes Papier im Ausgabefach befindet.
2. Entfernen Sie das sichtbare Papier. HINWEIS: Wenn Papier gerissen ist, müssen alle Einzelteile entfernt werden, bevor der Druckvorgang fortgesetzt wird. 3. Öffnen und schließen Sie die hintere Klappe, um die Meldung zu löschen.
Lösen von Problemen mit der Bildqualität Die häufigsten Probleme mit der Druckqualität können Sie durch die Befolgung nachstehender Richtlinien bereits vorab unterbinden.
5. Wählen Sie in der Dropdown-Liste Mediensorte eine Papiersorte aus. 6. Klicken Sie auf die Schaltfläche Drucken. Anpassen der Farbeinstellungen im Druckertreiber Ändern des Farbmotivs für einen Druckjob DEWW 1. Klicken Sie im Menü Datei des Softwareprogramms auf Drucken. 2. Wählen Sie die Option Eigenschaften oder Voreinstellungen aus. 3. Klicken Sie auf die Registerkarte Farbe. 4. Wählen Sie in der Dropdown-Liste Farbmotive ein Farbmotiv aus.
Ändern der Farboptionen Ändern Sie die Farbeinstellungen für den derzeitigen Druckjob im Druckertreiber auf der Registerkarte „Farbe“. 1. Klicken Sie im Menü Datei des Softwareprogramms auf Drucken. 2. Wählen Sie die Option Eigenschaften oder Voreinstellungen aus. 3. Klicken Sie auf die Registerkarte Farbe. 4. Klicken Sie auf die Einstellung Automatisch oder Manuell. ● Einstellung Automatisch: Diese Einstellung ist für die meisten Farbdruckjobs geeignet.
Verwenden Sie ausschließlich Papiersorten und Papiergewichte, die von diesem Gerät unterstützt werden. Beachten Sie des Weiteren die folgenden Richtlinien bei der Auswahl des Papiers: ● Verwenden Sie Papier von guter Qualität, das keine Einschnitte, Ritzen, Risse, Flecken, lose Partikel, Staubteilchen, Falten, Perforationen, Heftklammern und eingerollte oder geknickte Ecken aufweist. ● Verwenden Sie kein Papier, das bereits bedruckt wurde. ● Verwenden Sie für Laserdrucker geeignetes Papier.
Prüfen der Druckpatronen Prüfen Sie alle Druckpatronen, und ersetzen Sie sie bei Bedarf, wenn eines der folgenden Probleme auftritt: ● Der Druck ist zu hell oder teilweise verblasst. ● Die gedruckten Seiten weisen kleine Bereiche ohne Druck auf. ● Auf den gedruckten Seiten sind Striche oder Streifen zu sehen. Wenn Sie sich entscheiden, eine Druckpatrone auszuwechseln, drucken Sie die VerbrauchsmaterialStatusseite, um die Teilenummer für die Original-Druckpatrone von HP zu erfahren.
Auf dieser Seite werden fünf Farbstreifen dargestellt, die in vier Gruppen aufgeteilt sind, wie in der folgenden Abbildung gezeigt. Durch das Überprüfen der einzelnen Gruppen können Sie das Problem auf eine bestimmte Druckpatrone eingrenzen. Bereich Druckpatrone 1 Gelb 2 Zyan 3 Schwarz 4 Magenta ● Wenn nur in einer der Gruppen Punkte oder Striche auftreten, wechseln Sie die Druckpatrone aus, die dieser Gruppe zugeordnet ist.
3. Untersuchen Sie die Oberfläche der grünen Bildtrommel an der Unterseite der Druckpatrone. ACHTUNG: Berühren Sie die grüne Walze (Bildtrommel) an der Unterseite der Patrone nicht. Fingerabdrücke auf der Bildtrommel können die Druckqualität beeinträchtigen. 4. Wenn Sie Kratzer, Fingerabdrücke oder andere Schäden an der Bildtrommel erkennen, tauschen Sie die Druckpatrone aus. 5.
HP PCL 6-Treiber HP UPD PS Druckertreiber HP UPD PCL 5 ● Als Standardtreiber bereitgestellt. Dieser Treiber wird automatisch installiert, wenn Sie nicht explizit einen anderen Treiber auswählen.
Das Gerät druckt nicht oder nur langsam Das Gerät druckt nicht Wenn das Gerät nicht druckt, versuchen Sie folgende Lösungsansätze. 1. Stellen Sie sicher, dass das Gerät eingeschaltet ist und auf dem Bedienfeld die Bereitschaft des Geräts angezeigt wird. ◦ Wenn auf dem Bedienfeld die Bereitschaft des Geräts nicht angezeigt wird, schalten Sie das Gerät zunächst aus und dann wieder ein. ◦ Wenn auf dem Bedienfeld die Bereitschaft des Geräts angezeigt wird, versuchen Sie erneut, den Job zu senden. 2.
Das Gerät druckt langsam Wenn das Gerät nur langsam druckt, versuchen Sie folgende Lösungsansätze. DEWW 1. Stellen Sie sicher, dass der Computer den Mindestspezifikationen für dieses Gerät gerecht wird. Die Spezifikationen finden Sie auf folgender Website: www.hp.com/support/ljcp1520series 2. Wenn das Gerät für den Druck verschiedener Papiersorten, wie schweres Papier, konfiguriert wurde, druckt das Gerät langsamer, so dass der Toner entsprechend auf dem Papier fixiert werden kann.
Lösen von Verbindungsproblemen Beheben von Problemen mit Direktverbindungen Wenn Sie das Gerät direkt an einen Computer angeschlossen haben, überprüfen Sie das Kabel. ● Stellen Sie sicher, dass das Kabel mit dem Computer und dem Gerät verbunden ist. ● Vergewissern Sie sich, dass das Kabel nicht länger als 5 m ist. Verwenden Sie ein kürzeres Kabel, und versuchen Sie es erneut. ● Überprüfen Sie die Funktionsfähigkeit des Kabels. Schließen Sie das Kabel hierzu an ein anderes Gerät an.
3. Wenn Sie das Gerät über einen Standard-TCP/IP-Port von Microsoft angeschlossen haben, verwenden Sie statt der IP-Adresse den Hostnamen. 4. Wenn die IP-Adresse korrekt ist, löschen Sie das Gerät, und fügen es dann erneut hinzu. Der Computer kann nicht mit dem Gerät kommunizieren 1. 2. Testen Sie die Netzwerkverbindung, indem Sie einen Ping-Befehl ausführen. a. Öffnen Sie eine Befehlszeile auf Ihrem Computer: Klicken Sie unter Windows auf Start und danach auf Ausführen.
Beheben von Problemen mit dem drahtlosen Netzwerk ● Checkliste für die drahtlose Verbindung ● Auf dem Bedienfeld wird folgende Meldung angezeigt: Die Drahtlos-Funktion dieses Geräts wurde ausgeschaltet ● Nach Abschluss der drahtlosen Konfiguration druckt das Gerät nicht ● Das Gerät druckt nicht, und auf dem Computer ist eine Firewall eines Drittanbieters installiert ● Die drahtlose Verbindung funktioniert nicht mehr, nachdem die Position des drahtlosen Routers oder des Geräts verändert wurde ● De
● Sie haben den richtigen Druckeranschluss ausgewählt. ● Der Computer und das Gerät sind mit demselben drahtlosen Netzwerk verbunden. Auf dem Bedienfeld wird folgende Meldung angezeigt: Die DrahtlosFunktion dieses Geräts wurde ausgeschaltet ▲ Drücken Sie die Drahtlos-Taste auf dem Gerät, um das Drahtlos-Menü zu öffnen, und aktivieren Sie die Drahtlos-Funktion. Nach Abschluss der drahtlosen Konfiguration druckt das Gerät nicht 1.
Die drahtlose Verbindung funktioniert nicht mehr, nachdem die Position des drahtlosen Routers oder des Geräts verändert wurde Stellen Sie sicher, dass der Router oder das Gerät eine Verbindung zu dem Netzwerk aufbaut, mit dem Ihr Computer verbunden ist. 1. Öffnen Sie das Menü Berichte, und wählen Sie die Menüoption Konfigurationsbericht aus, um den Bericht zu drucken. 2.
Das Netzwerk erscheint nicht in der Liste der drahtlosen Netzwerke ● Stellen Sie sicher, dass der drahtlose Router eingeschaltet und an das Stromnetz angeschlossen ist. ● Das Netzwerk ist möglicherweise ausgeblendet. Es ist jedoch auch möglich, eine Verbindung zu einem ausgeblendeten Netzwerk aufzubauen. Das drahtlose Netzwerk funktioniert nicht 1. Versuchen Sie, andere Geräte an das Netzwerk anzuschließen, um zu überprüfen, ob die Verbindung des Netzwerks unterbrochen wurde. 2.
Beheben von Softwareproblemen Probleme mit der Druckersoftware Problem Lösung Im Ordner Drucker ist kein Druckertreiber für das Gerät zu finden ● Starten Sie den Computer neu, um den SpoolerProzess neu zu starten. Wenn der Spooler abgestürzt ist, erscheinen keine Druckertreiber im Ordner Drucker. ● Installieren Sie die Druckersoftware neu. HINWEIS: Schließen Sie alle evtl. geöffneten Anwendungen.
● Sie verwenden einen generischen Druckertreiber, wenn eine USB-Verbindung aufgebaut wurde Der Druckertreiber ist nicht in der Druck- & Fax-Liste aufgeführt 1. Stellen Sie sicher, dass sich die GZ-Datei des Produktes im folgenden Ordner auf Ihrer Festplatte befindet: Library/Printers/PPDs/Contents/Resources. Installieren Sie die Software gegebenenfalls neu. 2. Wenn sich die GZ-Datei im Ordner befindet, ist möglicherweise die PPD-Datei beschädigt.
Hardware-Fehlersuche 1. Vergewissern Sie sich, dass das Gerät eingeschaltet ist. 2. Vergewissern Sie sich, dass das USB-Kabel richtig angeschlossen wurde. 3. Überprüfen Sie, ob Sie das richtige Hochgeschwindigkeits-USB-Kabel verwenden. 4. Stellen Sie sicher, dass nicht zu viele USB-Geräte an dieselbe Stromquelle angeschlossen sind. Trennen Sie alle Geräte von der Stromquelle, und schließen Sie das Kabel direkt am USBAnschluss des Computers an. 5.
A DEWW Verbrauchsmaterialien und Zubehör ● Bestellen von Teilen, Zubehör und Verbrauchsmaterialien ● Teilenummern 169
Bestellen von Teilen, Zubehör und Verbrauchsmaterialien Bestellen von Verbrauchsmaterial und Papier www.hp.com/go/suresupply Bestellen von HP Originalteilen oder -zubehör www.hp.com/buy/parts Bestellen über Kundendienst- oder Serviceanbieter Wenden Sie sich an einen von HP autorisierten Kundendienst- oder Serviceanbieter.
Teilenummern Druckpatronen Tabelle A-1 Druckpatronen Teil Teilenummer Typ/Größe Druckpatronen CE320A Schwarze Druckpatrone mit HP ColorSphere-Toner CE321A Zyan Druckpatrone mit HP ColorSphere-Toner CE322A Gelbe Druckpatrone mit HP ColorSphere-Toner CE323A Magenta Druckpatrone mit HP ColorSphere-Toner HINWEIS: Informationen über die Ergiebigkeit von Patronen finden Sie unter www.hp.com/go/ pageyield. Die tatsächliche Ergiebigkeit der Patrone hängt von der jeweiligen Nutzung ab.
172 Anhang A Verbrauchsmaterialien und Zubehör DEWW
B DEWW Service und Support ● Eingeschränkte Gewährleistung von Hewlett-Packard ● Gewährleistung mit Premiumschutz von HP: Eingeschränkte Gewährleistungserklärung für HP LaserJet-Druckpatrone ● In der Druckpatrone gespeicherte Daten ● Lizenzvereinbarung für Endbenutzer ● OpenSSL ● Kundendienst ● Wiederverpacken des Geräts 173
Eingeschränkte Gewährleistung von Hewlett-Packard HP PRODUKT GEWÄHRLEISTUNGSZEITRAUM HP Color LaserJet CP1525n, CP1525nw Einjährige Austauschfrist für das Gerät HP gewährleistet Ihnen, dem Endbenutzer, während des oben genannten Zeitraums ab Kaufdatum, dass die HP Hardware und das Zubehör frei von Material- und Verarbeitungsfehlern sind.
ODER FOLGESCHÄDEN (EINSCHLIESSLICH ENTGANGENER GEWINNE ODER DATENVERLUSTE) SOWIE ANDERE SCHÄDEN. Einige Länder/Regionen, Staaten oder Provinzen lassen den Ausschluss oder die Beschränkung von Entschädigungen für zufällige oder mittelbare Schäden nicht zu, so dass Teile der oben genannten Einschränkungs- oder Ausschlussklauseln für Sie möglicherweise nicht relevant sind.
Gewährleistung mit Premiumschutz von HP: Eingeschränkte Gewährleistungserklärung für HP LaserJet-Druckpatrone Es wird gewährleistet, dass dieses HP Produkt frei von Defekten an Material und Verarbeitung ist.
In der Druckpatrone gespeicherte Daten Die in diesem Gerät verwendeten HP Druckpatronen verfügen über einen Speicherchip, der den Betrieb des Geräts unterstützt. Zudem erfasst er bestimmte Informationen zur Gerätenutzung, z. B.: das Datum der ersten Installation der Druckpatrone, das Datum der letzten Verwendung der Druckpatrone, die Anzahl der mit Hilfe der Druckpatrone gedruckten Seiten, die Seitenabdeckung, die verwendeten Druckmodi, aufgetretene Druckfehler und das Produktmodell.
Lizenzvereinbarung für Endbenutzer LESEN SIE DIESE VEREINBARUNG VOR VERWENDUNG DER SOFTWARE BITTE SORGFÄLTIG DURCH: Diese Lizenzvereinbarung für Endbenutzer („Lizenzvereinbarung“) stellt einen Vertrag zwischen (a) Ihnen (entweder als natürlicher oder als juristischer Person) und der (b) HewlettPackard Company („HP“) dar, der die Verwendung Ihres Softwareprodukts („Software“) regelt.
3. UPGRADES. Um von HP als Upgrade, Update oder Ergänzung bereitgestellte HP Software (insgesamt als „Upgrade“ bezeichnet) VERWENDEN zu dürfen, müssen Sie zuvor im Besitz einer Lizenz für die ursprüngliche HP Software sein, die von HP als Voraussetzung für die UpgradeBerechtigung genannt wird. Sofern das Upgrade die ursprüngliche HP Software ersetzt, dürfen Sie die ursprüngliche HP Software nicht mehr verwenden.
RECHT ZULÄSSIGEN UMFANG AUSGESCHLOSSEN. DIES GILT SELBST DANN, WENN HP ODER DESSEN LIEFERANTEN ÜBER DIE MÖGLICHKEIT DERARTIGER SCHÄDEN INFORMIERT WAREN UND WENN DER OBEN GENANNTE ANSPRUCH SEINEN GRUNDLEGENDEN ZWECK VERFEHLT. In einigen Staaten/Gesetzgebungen ist der Ausschluss oder die Beschränkung der Haftung für indirekte oder Folgeschäden nicht zulässig. In diesem Fall gilt die oben genannte Beschränkung oder der Ausschluss für Sie nicht. 9. EINGESCHRÄNKTE RECHTE DER US-REGIERUNG.
OpenSSL Dieses Produkt enthält Software, die vom OpenSSL Project zur Verwendung mit dem OpenSSL Toolkit (http://www.openssl.org/) entwickelt wurde. DIESE SOFTWARE WIRD VOM OpenSSL PROJECT OHNE MÄNGELGEWÄHR BEREITGESTELLT, UND AUSDRÜCKLICHE ODER STILLSCHWEIGENDE GEWÄHRLEISTUNGEN, EINSCHLIESSLICH – OHNE EINSCHRÄNKUNGEN – DER STILLSCHWEIGENDEN GEWÄHRLEISTUNG DER GEBRAUCHSTAUGLICHKEIT UND EIGNUNG FÜR EINEN BESTIMMTEN ZWECK WERDEN AUSGESCHLOSSEN.
Kundendienst Telefonsupport für Ihr Land/Ihre Region Bitte halten Sie die Produktbezeichnung, die Seriennummer, das Verkaufsdatum und eine Problembeschreibung bereit. Die Telefonnummern für Ihr Land/Ihre Region finden Sie auf dem im Lieferumfang enthaltenen Informationsblatt oder unter www.hp.com/support/. 24-Stunden-Kundendienst im Internet www.hp.com/support/ljcp1520series Kundendienst für Geräte, die für Macintosh Computer bestimmt sind www.hp.
Wiederverpacken des Geräts Wenn der HP Kundendienst feststellt, dass Ihr Gerät zu Reparaturzwecken eingeschickt werden muss, führen Sie die folgenden Schritte aus, um das Gerät für den Versand zu verpacken. ACHTUNG: Transportschäden, die auf unangemessene Verpackung zurückzuführen sind, fallen in die Verantwortung des Kunden. 1. Nehmen Sie die Druckpatronen heraus, und bewahren Sie sie auf. ACHTUNG: Es ist außerordentlich wichtig, die Druckpatronen vor dem Transport des Druckers zu entfernen.
184 Anhang B Service und Support DEWW
C DEWW Produktspezifikationen ● Physische Daten ● Stromverbrauch, elektrische Spezifikationen und akustische Emissionen ● Umgebungsbedingungen 185
Physische Daten Tabelle C-1 Physische Daten Höhe Tiefe Breite Gewicht 254 mm 452 mm 399 mm 18,43 kg 186 Anhang C Produktspezifikationen DEWW
Stromverbrauch, elektrische Spezifikationen und akustische Emissionen Aktuelle Informationen finden Sie unter www.hp.com/support/ljcp1520series. ACHTUNG: Die Netzspannung richtet sich nach dem Land/der Region, in dem bzw. in der das Produkt verkauft wird. Wandeln Sie die Betriebsspannungen nicht um. Dies kann zu Schäden am Produkt führen und die Produktgewährleistung aufheben.
Umgebungsbedingungen Tabelle C-2 Betriebsumgebungsbedingungen Umgebung Empfohlen Zulässig Temperatur 17 ° 15 bis 30 °C Luftfeuchtigkeit 30 % bis 70 % relative Luftfeuchtigkeit (RL) 10 % bis 80 % relative Luftfeuchtigkeit Einsatzhöhe Nicht relevant 0 bis 3048 m 188 Anhang C Produktspezifikationen DEWW
D DEWW Behördliche Bestimmungen ● FCC-Bestimmungen ● Umweltschutz-Förderprogramm ● Konformitätserklärung ● Konformitätserklärung (drahtlose Modelle) ● Sicherheitserklärungen ● Zusätzliche Erklärungen für Wireless-Produkte 189
FCC-Bestimmungen Dieses Gerät wurde typengeprüft und entspricht den Grenzwerten für Digitalgeräte der Klasse B gemäß Teil 15 der Vorschriften der US-Funk- und Fernmeldebehörde (Federal Communications Commission, FCC). Diese Grenzwerte sollen für einen angemessenen Schutz vor schädlichen Störungen beim Betrieb des Gerätes in Wohngebieten sorgen. Dieses Gerät erzeugt und verwendet Hochfrequenzenergie und strahlt diese unter Umständen auch ab.
Umweltschutz-Förderprogramm Schutz der Umwelt Hewlett-Packard hat sich zum Ziel gesetzt, umweltverträgliche Qualitätsprodukte herzustellen. Dieses Produkt wurde mit verschiedenen Eigenschaften entwickelt, die zu einer Entlastung unserer Umwelt beitragen. Erzeugung von Ozongas Dieses Produkt produziert keine nennenswerte Menge an Ozongas (O3). Stromverbrauch Im Bereitschafts- bzw.
Entwicklung und Herstellung über den Vertrieb und den Einsatz beim Kunden bis hin zum Recycling. Als Teilnehmer am HP Planet Partners Programm können Sie sich darauf verlassen, dass Ihre HP LaserJet Druckpatronen sachgemäß recycelt, die darin enthaltenen Kunststoffe und Metalle für neue Produkte verwendet und somit Millionen Tonnen von Abfall vermieden werden. Da die leere Druckpatrone dem Recycling zugeführt und für die Herstellung neuer Materialien genutzt wird, erhalten Sie sie nicht zurück.
Für Benutzer in Alaska und Hawaii: Verwenden Sie nicht den UPS-Aufkleber. Informationen und Anweisungen erhalten Sie telefonisch unter der Rufnummer 1-800-340-2445. Der US Postal Service bietet für Alaska und Hawaii im Rahmen einer Vereinbarung mit HP einen kostenlosen Rücksendeservice für Druckpatronen.
Datenblatt zur Materialsicherheit (MSDS) Datenblätter zur Materialsicherheit (MSDS) für Verbrauchsmaterial mit chemischen Substanzen (z. B. Toner) sind über die HP Website unter www.hp.com/go/msds oder www.hp.com/hpinfo/community/ environment/productinfo/safety erhältlich.
Konformitätserklärung Konformitätserklärung gemäß ISO/IEC 17050-1 und EN 17050-1 Name des Herstellers: Hewlett-Packard Company Adresse des Herstellers: 11311 Chinden Boulevard DoC#: BOISB-0603–03–rel.
Kontakt Europa Ihre örtliche Hewlett-Packard Vertriebs- und Kundendienststelle oder Hewlett-Packard GmbH, Department HQ-TRE/Standards Europe, Herrenberger Straße 140, D-71034 Böblingen (Fax: +49-7031-14-3143) www.hp.
Konformitätserklärung (drahtlose Modelle) Konformitätserklärung gemäß ISO/IEC 17050-1 und EN 17050-1 Name des Herstellers: Hewlett-Packard Company Adresse des Herstellers: 11311 Chinden Boulevard DoC#: BOISB-0603–04–rel.
Dieses Gerät entspricht Abschnitt 15 der FCC-Richtlinien. Der Betrieb unterliegt den beiden folgenden Bedingungen: (1) Dieses Gerät darf keine Störungen verursachen, und (2) dieses Gerät muss alle eingehenden Störungen aufnehmen, einschließlich solcher, die den Betrieb auf unerwünschte Weise beeinflussen. 1. Dieses Produkt wurde in einer typischen Konfiguration mit Hewlett-Packard PC-Systemen getestet. 2. Für behördliche Zwecke wird diesen Produkten eine behördliche Zulassungsnummer zugeordnet.
Sicherheitserklärungen Lasersicherheit Das Strahlenschutzamt (Center for Devices and Radiological Health, CDRH) der amerikanischen Arznei- und Lebensmittelbehörde (Food and Drug Administration, FDA) hat Bestimmungen für nach dem 1. August 1976 hergestellte Laserprodukte erlassen. Alle Laserprodukte, die auf den amerikanischen Markt gebracht werden, müssen diesen Bestimmungen entsprechen.
EMV-Erklärung (Korea) Erklärung zur Lasersicherheit für Finnland Luokan 1 laserlaite Klass 1 Laser Apparat HP Color LaserJet CP1525n, CP1525nw, laserkirjoitin on käyttäjän kannalta turvallinen luokan 1 laserlaite. Normaalissa käytössä kirjoittimen suojakotelointi estää lasersäteen pääsyn laitteen ulkopuolelle. Laitteen turvallisuusluokka on määritetty standardin EN 60825-1 (2007) mukaisesti.
Zusammensetzungstabelle (China) Hinweis zu Einschränkungen bei gefährlichen Substanzen (Türkei) Türkiye Cumhuriyeti: EEE Yönetmeliğine Uygundur DEWW Sicherheitserklärungen 201
Zusätzliche Erklärungen für Wireless-Produkte FCC-Konformitätserklärung für die USA Exposure to radio frequency radiation ACHTUNG: The radiated output power of this device is far below the FCC radio frequency exposure limits. Nevertheless, the device shall be used in such a manner that the potential for human contact during normal operation is minimized.
Hinweis bei Verwendung in Frankreich For 2.4 GHz Wireless LAN operation of this product certain restrictions apply: This equipment may be used indoor for the entire 2400-2483.5 MHz frequency band (channels 1-13). For outdoor use, only 2400-2454 MHz frequency band (channels 1-9) may be used. For the latest requirements, see www.arcep.fr. L'utilisation de cet equipement (2.
204 Anhang D Behördliche Bestimmungen DEWW
Index A Abbrechen Druckjob 64 Abrufen IP-Adresse 29, 42 Akustische Spezifikationen 187 Ändern der Größe von Dokumenten Macintosh 35 Anmerkungen iii Anschlüsse Vorhandene Typen 6 Anschlussfähigkeit Lösen von Problemen 160 USB 41 Anzeigekontrast, Einstellung 13 Archiveinstellung 15 Aufkleber Drucken (Windows) 80 Ausgabefach Position 5 Stau, beseitigen 148 Ausgabequalität Archiveinstellung 15 HP ToolboxFXEinstellungen 102 Ausrichtung Auswählen, Windows 75 Automatisches Crossover, festlegen 16 B Batterien, im
Drucken Einstellungen (Mac) 34 Einstellungen (Windows) 65 Drucken auf beiden Seiten Einstellungen (Windows) 71 Druckertreiber Auswählen 156 Konfigurieren des drahtlosen Netzwerks 45 Druckertreiber (Mac) Ändern von Einstellungen 32 Einstellungen 34 Druckertreiber (Windows) Ändern von Einstellungen 21, 22 Einstellungen 65 Unterstützte 19 Druckjob Abbrechen 64 Ändern von Einstellungen 21 Druckmedien Unterstützte Formate 55 Druckpatrone Lagern 112 Druckpatronen Entriegelung der Klappe, Position 5 Ersetzen 113 G
Neutrale Graustufen 94 Randkontrolle 93 Farbe (Registerkarte), Einstellungen 37 Farbeinstellungen Anpassen 151 Farbe kalibrieren 13, 102 Farbnutungsgsprotokoll 10, 98 Farboptionen Einstellen (Windows) 77 HP EasyColor (Windows) 95 Fax Werkseinstellungen, Wiederherstellen 130 Fehldruck (Fehlermeldung) 136 Fehler Software 166 Fehler, wiederholt auftretend 156 Fehlerbehebung Bedienfeldmeldungen 131 Mac-Probleme 166 Netzwerkprobleme 160 Probleme mit Direktverbindungen 160 Staus 143, 144 Wiederholt auftretende Fe
Linux-Software 26 Lizenz, Software 178 Lüfterfehlermeldung 134 Struktur drucken 10, 98 System-Setup 12 Menü „Berichte“ 10 M Mac Anpassen von Papierformat und Papiersorte 34 Entfernen von Software 31 HP Dienstprogramm 32 Probleme, Fehlerbehebung 166 Treibereinstellungen 32, 34 Unterstützte Betriebssysteme 28 Macintosh Ändern der Größe von Dokumenten 35 Support 182 Macintosh-Treibereinstellungen Benutzerdefiniertes Papierformat 35 Dienste (Registerkarte) 37 Wasserzeichen 35 Magenta in falscher Position (Feh
Gewährleistung 176 Lagern 112 Nicht von HP 112 Recycling 113, 191 Status, HP Toolbox FX anzeigen 100 Zubehörstatusseite 10, 98 Patronen, Druck Macintosh-Status 37 PCL-Einstellungen, HP ToolboxFX 103 PCL-Schriftliste 10, 98 PCL-Treiber 19 Permanente Ressourcen 121 Physische Spezifikationen 186 PostScript-Einstellungen, HP ToolboxFX 104 Problemlösung keine Reaktion 158 langsame Reaktion 159 Produktregistrierung 104 PS-Emulationstreiber 19 PS-Schriftliste 10, 98 Q Qualität Archiveinstellung 15 HP ToolboxFXEins
System (Registerkarte), integrierter Webserver 106 System Setup, Menü 12 System-Setup (Registerkarte), HP ToolboxFX 103 T TCP/IP Einstellungen 16 Unterstützte Betriebssysteme 40 Technischer Kundendienst Gerät wieder verpacken 183 Online 182 Teilenummern 171 Tipps iii Tonerpatronen.
© 2010 Hewlett-Packard Development Company, L.P. www.hp.