User's Manual

Connect with USB

This product supports a USB 2.0 connection. You must use an A-to-B type USB cable that is no longer

than 2 meters (6.56 feet).

CD installation

1. Insert the software installation CD into the computer CD drive.

NOTE: Do not connect the USB cable until prompted.

2. If the installation program does not open automatically, browse the CD contents and run the

SETUP.EXE file.

3. Follow the onscreen instructions for installing the software.

When you use the CD to install the software, you can select the following types of installations:

●

Easy Install (recommended)

You are not prompted to accept or make changes to defaults.

●

Advanced Install

You are prompted to accept or make changes to defaults.

ENWW

Connect with USB