User's Manual

3. Press the arrow buttons to adjust the number of copies.

4. Press the Start Copy

button to start copying.

Create multiple copies (M1210 Series)

1. Load the document onto the scanner glass or into the document feeder.

2. Use the keypad to enter the number of copies.

3. Press the Start Copy

button to start copying.

Copy a multiple-page original

M1130 Series: Load the first page onto the scanner glass, and press the Start Copy button.

Repeat this process for each page.

M1210 Series: Load a stack of original documents into the document feeder, and press the Start

Copy

button.

Copy identification cards (M1210 Series only)

Use the ID copy feature to copy both sides of identification cards, or other small-size documents, onto

the same side of one sheet of paper. The product scans half of the image area, prompts you to turn the

document over, and then scans again. The product prints both images at the same time.

1. Place the first side of the document face-down on the scanner glass.

2. Press the Copy Settings

button three times to open the ID Copy menu. Press the OK button.

3. The product scans the first page of the document and then prompts you to load the next page.

Open the scanner lid and turn the document over, place it on a different portion of the scanner

glass, and then press the OK button.

ENWW

Use copy functions