Operation Manual

Table 8-2 Control-panel light patterns (continued)
Light status Error code State of the product Action
Attention light is blinking. E0 Paper is jammed in the printer. Clear the jam.
E1 The input tray is empty. Load the tray.
E2 A door is open. Verify that the toner-cartridge
door is fully closed.
E4 The toner cartridge is very low. Press the Start Copy button to
continue or replace the toner
cartridge.
E5 The toner cartridge is very low. Replace the toner cartridge.
H0 The printer is in manual-feed
mode.
Load the correct paper type and
size into the input tray. Press
the Start Copy button to
continue.
H1 The printer is processing a
manual duplex job.
Load the pages into the input
tray to print the second sides.
Press the Start Copy button to
continue.
The attention and toner lights
are blinking.
E3 The toner-cartridge is missing or
is not installed correctly.
Install the toner-cartridge.
The toner light is on. The toner-cartridge has reached
the end of its estimated useful
life. When the supply has
reached this condition, the HP
Premium Protection warranty
for that supply has ended.
You do not need to replace the
toner-cartridge at this time
unless print quality is no longer
acceptable.
The attention and ready lights
are on.
E6
E7
E8
E9
The printer has experienced a
fatal error from which it cannot
recover.
1. Turn o the printer or
disconnect the power cord
from the printer.
2. Wait 30 seconds, and then
turn on the printer or
reconnect the power cord
to the printer.
3. Wait for the printer to
initialize.
If the error persists, contact HP
customer support.
68 Chapter 8 Solve problems ENWW