Operation Manual

Restore the factory-set defaults
Restoring the factory-set defaults returns all of the printer and network settings to the factory defaults. It will
not reset the page count, or tray size. To restore the printer to the factory-default settings, follow these steps.
CAUTION: Restoring the factory-set defaults returns all of the settings to the factory defaults, and it also
deletes any pages that are stored in the memory.
NOTE: The steps vary according to the type of control panel.
1 2
1 LED control panel
2 LCD control panel
LED control panels:
1. Open the HP Embedded Web Server (EWS):
a. Open the Start menu, and then select Programs or All Programs.
b. Open the HP group, open the printer group, and then select HP Device Toolbox.
2. Click the System tab, and then click the System Setup page.
3. Select the Restore System Defaults option, and click the Apply button.
The printer automatically restarts.
LCD control panels:
1. On the printer control panel, open the Setup menu.
2. Open the Service menu.
3. Select Restore Defaults.
The printer automatically restarts.
ENWW Restore the factory-set defaults 69