Operation Manual

●
Reports
●
Supplies status
3. Use the arrow keys to select Print Supplies status page, and then press the OK button.
Clean the printer
Print a cleaning page
During the printing process paper, toner, and dust particles can accumulate inside the printer and can cause print-
quality issues such as toner specks or spatter, smears, streaks, lines, or repeating marks.
Use the following procedure to print a cleaning page.
NOTE: The steps vary according to the type of control panel.
1 2
1 LED control panel
2 LCD control panel
LED control panels:
1. Open the HP Embedded Web Server (EWS):
a. Open the Start menu, and then select Programs or All Programs.
b. Open the HP group, open the printer group, and then select HP Device Toolbox.
2. Click the System tab, and then select the Service page.
3. In the Cleaning Mode area, click Start to begin the cleaning process.
LCD control panels
1. From the product control panel, press the Setup button.
2. Open the Service menu.
3. Use the arrow keys to select the Cleaning mode option, and then press the OK button.
The product prints the rst side and then prompts you to remove the page from the output bin and reload it
in the input tray, keeping the same orientation. Wait until the process is complete. Discard the page that
prints.
86 Chapter 8 Solve problems ENWW