LaserJet Pro MFP M148-M149 LaserJet Pro MFP M227-M229 LaserJet Ultra MFP M230-M231 Benutzerhandbuch M148-M149 M227-M229 M230-M231 www.hp.com/support/ljM148MFP www.hp.
HP LaserJet Pro MFP M148-M149 HP LaserJet Pro MFP M227-M229 HP LaserJet Ultra MFP M230-M231 Benutzerhandbuch
Copyright und Lizenz Marken © Copyright 2018 HP Development Company, L.P. Adobe®, Adobe Photoshop®, Acrobat®und PostScript® sind Marken von Adobe Systems Incorporated. Die Vervielfältigung, Adaption oder Übersetzung ist ohne vorherige schriftliche Genehmigung nur im Rahmen des Urheberrechts zulässig. Die in diesem Dokument enthaltenen Informationen können ohne Vorankündigung geändert werden. Apple und das Apple-Logo sind Marken von Apple Inc., eingetragen in den USA und anderen Ländern/Regionen.
Inhaltsverzeichnis 1 Druckerübersicht ....................................................................................................................................................................................... 1 Druckeransichten ...................................................................................................................................................................... 2 Vorderansicht des Druckers ..........................................................................
Manuelle Zufuhr von Etiketten ........................................................................................................................ 27 Ausrichtung des Etikettenbogens ................................................................................................................... 28 3 Verbrauchsmaterial, Zubehör und Teile ..............................................................................................................................................
Automatischer beidseitiger Druck (Windows) ............................................................................................... 51 Manueller beidseitiger Druck (Windows) ....................................................................................................... 51 Drucken mehrerer Seiten pro Blatt (Windows) ............................................................................................. 53 Auswählen der Papiersorte (Windows) ...............................................
Methode 2: Einrichten der Funktion „Scannen an E-Mail“ über den integrierten HP Webserver (Windows) ........................................................................................................................................................... 78 Schritt 1: Zugriff auf den HP Webserver (EWS) ........................................................................ 78 Schritt 2: Konfigurieren der Funktion „Scannen in E-Mail“ .....................................................
Gemeinsame Leitung für Sprach-/Faxanrufe ........................................................................ 100 Gemeinsame Leitung für Sprach-/Faxanrufe mit Anrufbeantworter ................................ 101 Schritt 3: Konfigurieren der Uhrzeit, des Datums und der Kopfzeile des Faxgeräts ............................ 103 HP Assistent für die Faxeinrichtung ......................................................................................... 103 Druckerbedienfeld .................................
Drucken im EconoMode ................................................................................................................................. 131 Konfigurieren der Einstellung „Bereitschaft/Automatisches Ausschalten nach Inaktivität“ ............... 131 Festlegen der Verzögerung für „Automatisches Ausschalten nach Inaktivität“ und Konfigurieren des Druckers, so dass er höchstens 1 Watt verbraucht ............................................................................
Drucken einer Reinigungsseite ................................................................................................. 174 Überprüfen des Scannerglases auf Schmutz und Flecken .................................................. 175 Führen Sie eine Sichtprüfung der Tonerpatrone und der Bildtrommel durch. ...................................... 175 Überprüfen des Papiers und der Druckumgebung ....................................................................................
Die drahtlose Verbindung funktioniert nicht mehr, nachdem die Position des drahtlosen Routers oder des Druckers verändert wurde ............................................................................................................ 194 Der Anschluss mehrerer Computer an den drahtlosen Drucker ist nicht möglich ............................... 195 Beim Anschluss an ein VPN wird die Verbindung des drahtlosen Druckers unterbrochen .................
1 Druckerübersicht ● Druckeransichten ● Druckerspezifikationen ● Konfiguration der Produkthardware und Softwareinstallation Siehe auch: Die folgenden Informationen sind zum Zeitpunkt der Veröffentlichung richtig. Aktuelle Informationen finden Sie unter www.hp.com/support/ljM148MFP, www.hp.com/support/ljM227MFP.
Druckeransichten ● Vorderansicht des Druckers ● Rückansicht des Druckers ● Schnittstellenanschlüsse ● Zweizeilige LCD-Bedienfeld-Ansicht (Modelle M148dw, M227d, M227sdn, M230sdn) ● Zweizeilige LCD-Bedienfeld-Ansicht (Modelle M148fdw, M227fdn) ● Ansicht des Touchscreen-Bedienfelds (Modelle M227fdw, M230fdw) Vorderansicht des Druckers 13 12 1 2 3 OK 4 11 5 6 10 9 8 1 Ausgabefach 2 Tonerpatronenklappe 3 Ausgabefacherweiterung 4 Netztaste 5 Einzelblattzuführung 6 Hauptzufuhrfach
Rückansicht des Druckers 1 5 2 4 3 1 Hintere Klappe (Zugang zum Beheben von Papierstaus) 2 Schnittstellenanschlüsse 3 Netzanschluss 4 Serien- und Produktnummernaufkleber 5 Öffnung für Kabel-Sicherheitssperre (an der hinteren Abdeckung des Druckers) Schnittstellenanschlüsse 1 2 3 4 DEWW 1 USB-Schnittstellenanschluss 2 Ethernet-Anschluss Druckeransichten 3
3 Eingangsbuchse für Fax zum Anbringen einer Faxtelefonleitung am Drucker (nur bei Faxmodellen) 4 Ausgangsbuchse für Telefon (zum Anbringen einer Nebenstelle, eines Anrufbeantworters oder eines anderen Geräts) (nur bei Faxmodellen) Zweizeilige LCD-Bedienfeld-Ansicht (Modelle M148dw, M227d, M227sdn, M230sdn) 1 2 3 4 14 13 5 12 6 7 11 9 8 1 Bedienfeldanzeige Dieser Bildschirm enthält Menüs und Druckerdaten.
7 8 9 Kopierstart Starten Sie einen Kopierjob mit dieser Schaltfläche. taste Kopiermenü Über diese Schaltfläche öffnen Sie das Menü Kopieren. (Taste) Verwenden Sie diese Schaltfläche, um heller oder dunkler zu kopieren. Taste „Aufhellen/Abdunkeln“ für Kopien 10 Legen Sie mit dieser Schaltfläche die Anzahl der Kopien für einen Druckjob fest. Taste Kopienanzahl 11 Setup 12 Schaltfläche Über diese Schaltfläche öffnen Sie das Menü Setup.
3 Schaltfläche OK 4 Schaltfläche 5 Schaltfläche „Abbrechen“ 6 7 8 Mit der Schaltfläche OK können Sie die folgenden Aktionen ausführen: Rechtspfeil Kopierstart ● Bedienfeldmenüs öffnen ● Ein auf dem Bedienfeld angezeigtes Untermenü öffnen ● Menüoption auswählen ● Bestimmte Fehlermeldungen löschen ● Einen Druckauftrag als Reaktion auf eine Bedienfeldaufforderung beginnen (z. B. wenn die Meldung Drücken Sie [OK], um fortzufahren auf der Bedienfeldanzeige angezeigt wird).
Ansicht des Touchscreen-Bedienfelds (Modelle M227fdw, M230fdw) 1 2 3 4 5 1 Zurück (Taste) Wechselt zum vorherigen Bildschirm 2 Home-Schaltfläche Öffnet den Home-Bildschirm 3 Hilfe-Schaltfläche Bietet Zugriff auf das Hilfesystem zum Bedienfeld 4 Farb-Touchscreen Hierüber haben Sie Zugriff auf Menüs, Hilfe-Animationen und Druckerdaten. 5 Homepage-Bildschirmanzeige Diese Anzeige zeigt an, welcher Home-Bildschirm aktuell auf dem Bedienfeld angezeigt wird.
Layout des Home-Bildschirms 1 2 4 3 5 6 7 8 9 10 1 Schaltfläche Zurücksetzen Mit dieser Schaltfläche können Sie alle temporären Jobeinstellungen auf die Standardeinstellungen des Druckers zurücksetzen. 2 Schaltfläche „Verbindungsinformatione n“ Über diese Schaltfläche können Sie das Menü Verbindungsinformationen öffnen, in dem Sie Netzwerkinformationen finden.
DEWW Maßnahme Beschreibung Beispiel Berühren Sie die Schaltfläche Berühren Sie eine Option auf dem Bildschirm, um sie auszuwählen oder das Menü zu öffnen. Beim Scrollen durch das Menü können Sie den Scrollvorgang durch eine leichte Berührung stoppen. Berühren Sie Setup öffnen. Wischen Bewegen Sie den Finger horizontal über den Bildschirm, um ihn seitlich zu verschieben. Wischen Sie über die Startanzeige, um zur Einrichtung zu gelangen.
Druckerspezifikationen WICHTIG: Die folgenden Spezifikationen waren zum Zeitpunkt der Veröffentlichung korrekt, können jedoch jederzeit geändert werden. Aktuelle Informationen finden Sie unter www.hp.com/support/ljM148MFP, www.hp.com/support/ljM227MFP.
Tabelle 1-1 Unterstützte Betriebssysteme und Druckertreiber (Fortsetzung) DEWW Betriebssystem Druckertreiber installiert (von der Software im Internet) Bemerkungen Windows Vista®, 32-Bit Der druckerspezifische Druckertreiber „HP PCL.6“ wird für dieses Betriebssystem als Teil der Softwareinstallation installiert. Microsoft hat den Mainstream-Support für Windows Vista im April 2012 eingestellt. HP wird weiterhin den bestmöglichen Support für das eingestellte Betriebssystem Windows Vista bereitstellen.
HINWEIS: Rufen Sie die Liste der unterstützten Betriebssysteme ab. Gehen Sie für die HP Kompletthilfe für den Drucker zu www.hp.com/support/ljM148MFP, www.hp.com/support/ljM227MFP. HINWEIS: Zusätzliche Details zu Client- und Serverbetriebssystemen sowie Unterstützung für die HP UPD PCL6- und UPD PS-Treiber für diesen Drucker finden Sie unter www.hp.com/go/upd. Klicken Sie dort auf die Registerkarte Spezifikationen.
Vollständig geschlossener Drucker Vollständig geöffneter Drucker 1. Höhe 311,5 mm 419,9 mm 2. Breite 415,1 mm 415,1 mm 3. Tiefe 407,4 mm 624,4 mm Gewicht (mit Druckpatronen) 9,9 kg Abbildung 1-2 Druckerabmessungen – Modell M227d 1 OK 1 3 3 2 2 Messart Vollständig geschlossener Drucker Vollständig geöffneter Drucker 1. Höhe 263,1 mm (10,4 Zoll) 419,9 mm (16,5 Zoll) 2. Breite 403 mm (15,8 Zoll) 403 mm 3.
Tabelle 1-2 Betriebsumgebungsbedingungen (Fortsetzung) 14 Umgebung Empfohlen Zulässig Relative Luftfeuchtigkeit 30 % bis 70 % relative Luftfeuchtigkeit (RL) 10 bis 80 % (RLF) Einsatzhöhe Nicht relevant 0 bis 3048 m Kapitel 1 Druckerübersicht DEWW
Konfiguration der Produkthardware und Softwareinstallation Grundlegende Konfigurationsanleitungen finden Sie in den im Lieferumfang des Druckers enthaltenen Einrichtungsanweisungen und dem Leitfaden zur Inbetriebnahme. Weitere Anleitungen finden Sie auf der Kundendienst-Webseite von HP. Gehen Sie für die HP Kompletthilfe für den Drucker zu www.hp.com/support/ljM148MFP, www.hp.com/support/ ljM227MFP.
16 Kapitel 1 Druckerübersicht DEWW
2 Papierfächer ● Befüllen des Einzelblatteinzugs ● Beladen des Hauptzufuhrfachs ● Einlegen und Drucken von Umschlägen ● Einlegen und Drucken von Etiketten Siehe auch: Die folgenden Informationen sind zum Zeitpunkt der Veröffentlichung richtig. Aktuelle Informationen finden Sie unter www.hp.com/support/ljM148MFP, www.hp.com/support/ljM227MFP.
Befüllen des Einzelblatteinzugs Einführung Die folgenden Informationen beschreiben das Einlegen von Papier in den Einzelblatteinzug. Dieses Fach hat ein Fassungsvermögen von bis zu 10 Blatt Papier mit 75 g/m2. HINWEIS: 18 Zur Vermeidung von Papierstaus: ● Sie sollten während des Druckens niemals Papier in den Einzelblatteinzug einlegen oder daraus entfernen. ● Bevor Sie neues Papier einlegen, nehmen Sie zuerst sämtliches Papier aus dem Zufuhrfach, und richten Sie den neuen Papierstapel gerade aus.
3. Legen Sie die obere Kante des Papiers an die Öffnung des Einzelblatteinzugs. Informationen zum Ausrichten des Papiers finden Sie unter Papierausrichtung im Einzelblatteinzug auf Seite 19. 4. Stellen Sie die Papierführungen so ein, dass sie locker am Papierstapel anliegen, ohne das Papier zu biegen. HINWEIS: Richten Sie die Papierführungen so aus, dass sie nicht zu eng am Papierstapel anliegen.
Papiersorte Bildausrichtung Duplexmodus Papierformat So legen Sie Papier ein 2-seitiger Druck Letter, Legal, Oficio (8,5 x 13), A4 Druckseite oben Vorderkante zum Drucker zeigend Gelocht Hochformat Einseitiger Druck 2-seitiger Druck Letter, Legal, Executive, Statement, Oficio (8.
Beladen des Hauptzufuhrfachs Einführung Die folgenden Informationen beschreiben das Einlegen von Papier in das Hauptzufuhrfach. Dieses Fach hat ein Fassungsvermögen von bis zu 250 Blatt Papier mit 75 g/m2. HINWEIS: Zur Vermeidung von Papierstaus: ● Sie sollten während des Druckens niemals Papier in das Hauptzufuhrfach einlegen oder daraus entfernen. ● Bevor Sie neues Papier einlegen, nehmen Sie zuerst sämtliches Papier aus dem Zufuhrfach, und richten Sie den neuen Papierstapel gerade aus.
22 3. Passen Sie die Papierführung an, indem Sie sie auf die Größe des verwendeten Papiers zusammenschieben. 4. Legen Sie das Papier in das Fach ein. Informationen zum Ausrichten des Papiers finden Sie unter Papierausrichtung im Hauptzufuhrfach auf Seite 23.
5. Schieben Sie die Führungen nach innen, bis sie am Papier anliegen, ohne es zu biegen. HINWEIS: Richten Sie die Papierführungen so aus, dass sie nicht zu eng am Papierstapel anliegen. HINWEIS: Stellen Sie die Papierführungen auf das korrekte Format ein, und legen Sie nicht zu viel Papier in das Fach ein, um Papierstaus zu vermeiden. 6. Wenn das Papier im A4-Format oder kleiner ist, schließen Sie die Klappe des Hauptzufuhrfachs.
Papiersorte Bildausrichtung Duplexmodus Papierformat So legen Sie Papier ein 2-seitiger Druck Letter, Legal, Oficio (8,5 x 13), A4 Druckseite oben Vorderkante zum Drucker zeigend Gelocht Hochformat Einseitiger Druck 2-seitiger Druck Letter, Legal, Executive, Statement, Oficio (8.
Einlegen und Drucken von Umschlägen Einführung Die folgenden Informationen beschreiben das Einlegen und Drucken von Umschlägen. Der Einzelblatteinzug kann bis zu 10 Umschläge aufnehmen. Das Hauptzufuhrfach fasst bis zu 10 Umschläge. Um Umschläge mit der manuellen Zufuhroption zu drucken, führen Sie bitte zur Auswahl der korrekten Einstellungen im Druckertreiber die folgenden Schritte aus. Legen Sie anschließend die Umschläge in das Fach, nachdem Sie den Druckjob an den Drucker gesendet haben.
Umschlagausrichtung Fach Umschlagformat Einlegen von Umschlägen Einzelblattzuführung Umschlag #10, Monarch-Umschlag, Umschlag B5, Umschlag C5, Umschlag DL Druckseite oben Umschlag #10, Monarch-Umschlag, Umschlag B5, Umschlag C5, Umschlag DL Druckseite oben Hauptzufuhrfach 26 Kapitel 2 Papierfächer Schmalseite mit der Frankierungsstelle voran Schmalseite mit der Frankierungsstelle voran DEWW
Einlegen und Drucken von Etiketten Einführung Die folgenden Informationen beschreiben das Einlegen und Drucken von Etiketten. Um Etiketten mit der manuellen Zufuhroption zu drucken, führen Sie bitte zur Auswahl der korrekten Einstellungen im Druckertreiber die folgenden Schritte aus. Legen Sie anschließend die Etiketten in das Fach, nachdem Sie den Druckjob an den Drucker gesendet haben.
Ausrichtung des Etikettenbogens Fach Vorgehensweise zum Einlegen von Etiketten Einzelblattzuführun g Druckseite oben Hauptzufuhrfach Druckseite oben Obere Kante zeigt zum Drucker Obere Kante zeigt zum Drucker 28 Kapitel 2 Papierfächer DEWW
3 Verbrauchsmaterial, Zubehör und Teile ● Bestellen von Verbrauchsmaterial, Zubehör und Teilen ● Konfigurieren der Verbrauchsmaterialeinstellungen für HP Tonerpatronenschutz ● Austauschen der Tonerpatrone ● Austauschen der Bildtrommel Siehe auch: Die folgenden Informationen sind zum Zeitpunkt der Veröffentlichung richtig. Aktuelle Informationen finden Sie unter www.hp.com/support/ljM148MFP, www.hp.com/support/ljM227MFP.
Bestellen von Verbrauchsmaterial, Zubehör und Teilen Bestellen Bestellen von Verbrauchsmaterial und Papier www.hp.com/go/suresupply Bestellen von HP Originalteilen oder -zubehör www.hp.com/buy/parts Bestellen über Kundendienst- oder Serviceanbieter Wenden Sie sich an einen von HP autorisierten Kundendienst- oder Serviceanbieter.
für die Ausführung der Reparatur. Für diese Bauteile wird unter der HP Produktgewährleistung kein vor Ortoder Return-to-Depot-Support angeboten. ● Bauteile, die in der Spalte „Austausch durch Kunden“ den Eintrag Optional aufweisen, können innerhalb des Druckergewährleistungszeitraums auf Anforderung des Kunden und ohne zusätzliche Kosten durch Servicemitarbeiter von HP installiert werden.
Konfigurieren der Verbrauchsmaterialeinstellungen für HP Tonerpatronenschutz ● Einführung ● Aktivieren oder deaktivieren der Funktion „Patronenrichtlinie“ ● Aktivieren oder deaktivieren der Funktion „Patronenschutz“ Einführung Mit der Patronenrichtlinie und dem Patronenschutz von HP bestimmen Sie, welche Patronen im Drucker installiert werden, und schützen die installierten Patronen vor Diebstahl.
Verwenden des Bedienfelds des Druckers zum Deaktivieren der Funktion „Patronenrichtlinie“ 1. Öffnen Sie die Menüs, indem Sie die Schaltfläche Setup Druckers berühren. 2. Öffnen Sie die folgenden Menüs: 3. ● Systemkonfiguration ● Verbrauchsmaterialeinstellungen ● Patronenrichtlinie oder die Schaltfläche OK auf dem Bedienfeld des Wählen Sie Aus. Verwenden des integrierten HP Webservers (EWS) zum Aktivieren der Funktion „Patronenrichtlinie“ 1. Öffnen Sie den integrierten HP Webserver. a.
b. Öffnen Sie einen Webbrowser. Geben Sie die IP-Adresse oder den Hostnamen genau so in die Adresszeile ein, wie sie bzw. er auf dem Bedienfeld des Druckers angezeigt wird. Drücken Sie auf der Computertastatur die Eingabetaste. Der integrierte HP Webserver wird geöffnet. HINWEIS: Wenn eine Meldung angezeigt wird, dass der Zugriff auf die Website eventuell nicht sicher ist, wählen Sie die Option zum Aufrufen der Website. Der Computer wird durch den Zugriff auf diese Website nicht beschädigt. 2.
ACHTUNG: Sobald Sie den Patronenschutz für den Drucker aktiviert haben, werden alle danach in den Drucker installierten Tonerpatronen automatisch und dauerhaft geschützt. Um zu vermeiden, dass eine neue Patrone geschützt wird, deaktivieren Sie die Funktion „Patronenschutz“, bevor Sie die neue Patrone installieren. Durch das Deaktivieren der Funktion wird nicht der Schutz von Patronen deaktiviert, die derzeit installiert sind.
Verwenden des integrierten HP Webservers (EWS) zum Deaktivieren der Funktion „Patronenschutz“ 1. Öffnen Sie den integrierten HP Webserver. a. Zweizeilige Bedienfelder: Sie finden die IP-Adresse auf dem Bedienfeld. Bedienfelder mit Touchscreen: Berühren Sie auf dem Bedienfeld des Druckers auf dem HomeBildschirm die Schaltfläche „Netzwerk“ , um die IP-Adresse oder den Hostnamen anzuzeigen. b. Öffnen Sie einen Webbrowser.
Austauschen der Tonerpatrone ● Einführung ● Informationen zu Tonerpatronen ● Entfernen und Einsetzen der Tonerpatrone Einführung Im Folgenden finden Sie nähere Informationen zur Tonerpatrone für den Drucker sowie Anweisungen für den Austausch der Tonerpatrone. Informationen zu Tonerpatronen Dieser Drucker zeigt an, wenn der Tonerpatronenstand gering ist. Die tatsächlich verbleibende Gebrauchsdauer der Patrone kann unterschiedlich sein.
1 1 Tonerpatrone ACHTUNG: Sollte Toner auf Ihre Kleidung gelangen, entfernen Sie ihn mithilfe eines trockenen Tuchs, und waschen Sie die Kleidungsstücke anschließend in kaltem Wasser. Durch heißes Wasser setzt sich der Toner im Gewebe fest. HINWEIS: Informationen zum Recycling von gebrauchten Tonerpatronen finden Sie in der Verpackung der neuen Tonerpatrone. Entfernen und Einsetzen der Tonerpatrone 1. 38 Heben Sie die Scannereinheit an.
2. Öffnen Sie die Druckpatronenklappe. 3. Nehmen Sie die verbrauchte Tonerpatrone aus dem Drucker. 4. Nehmen Sie die neue, verpackte Tonerpatrone aus dem Karton, und ziehen Sie an der Lasche an der Verpackung.
40 5. Nehmen Sie die neue Tonerpatrone aus der geöffneten Verpackung. Legen Sie die verbrauchte Tonerpatrone in die Verpackung, damit sie recycelt werden kann. 6. Richten Sie die neue Tonerpatrone an den Führungswalzen im Drucker aus. Schieben Sie die neue Tonerpatrone so weit hinein, bis sie fest einrastet.
7. Schließen Sie die Patronenklappe. 8. Senken Sie die Scannereinheit ab.
Austauschen der Bildtrommel ● Einführung ● Informationen zur Bildtrommel ● Bauen Sie die Bildtrommel aus, und tauschen Sie sie aus. Einführung Im Folgenden finden Sie nähere Informationen zur Bildtrommel für den Drucker sowie Anweisungen für den Austausch der Tonerpatrone. Informationen zur Bildtrommel Dieser Drucker zeigt an, wenn die Bildtrommel ersetzt werden muss. Die tatsächlich verbleibende Gebrauchsdauer der Trommel kann unterschiedlich sein.
1 1 Bildtrommel ACHTUNG: Berühren Sie nicht die Bildtrommel. Fingerabdrücke können die Druckqualität beeinträchtigen. Informationen zum Recycling gebrauchter Bildtrommeln finden Sie in der Verpackung der Bildtrommel. Bauen Sie die Bildtrommel aus, und tauschen Sie sie aus. 1. Heben Sie die Scannereinheit an.
44 2. Öffnen Sie die Druckpatronenklappe. 3. Nehmen Sie vorübergehend die Tonerpatrone aus dem Drucker. 4. Entfernen Sie die verbrauchte Bildtrommel aus dem Drucker.
5. Nehmen Sie die neue, verpackte Bildtrommel aus dem Karton, und entfernen Sie die Verpackung. 1 2 6. Entfernen Sie die äußere Verpackung der neuen Bildtrommel. 7. Berühren Sie nicht die Bildtrommel. Fingerabdrücke auf der Bildtrommel können die Druckqualität beeinträchtigen.
46 8. Richten Sie die Bildtrommel an den Führungswalzen im Drucker aus. Schieben Sie die neue Bildtrommel so weit hinein, bis sie fest einrastet. 9. Richten Sie die Tonerpatrone an den Führungswalzen im Drucker aus. Schieben Sie die Tonerpatrone so weit hinein, bis sie fest einrastet.
10. Schließen Sie die Patronenklappe. 11. Senken Sie die Scannereinheit ab.
48 Kapitel 3 Verbrauchsmaterial, Zubehör und Teile DEWW
4 Drucken ● Druckaufträge (Windows) ● Druckaufträge (OS X) ● Mobiles Drucken ● Direktdruck über USB verwenden (nur Modelle mit Touchscreen) Siehe auch: Die folgenden Informationen sind zum Zeitpunkt der Veröffentlichung richtig. Aktuelle Informationen finden Sie unter www.hp.com/support/ljM148MFP, www.hp.com/support/ljM227MFP.
Druckaufträge (Windows) Druckanleitung (Windows) Die folgende Vorgehensweise beschreibt den grundlegenden Druckvorgang für Windows. 1. Wählen Sie im Softwareprogramm die Option Drucken. 2. Wählen Sie den Drucker in der Liste der Drucker aus. Klicken Sie zum Ändern von Einstellungen auf die Schaltfläche Eigenschaften bzw. Einstellungen, um den Druckertreiber zu öffnen. HINWEIS: Der Name der Schaltfläche variiert für verschiedene Softwareprogramme. HINWEIS: In Windows 10, 8.
Automatischer beidseitiger Druck (Windows) Nutzen Sie diese Vorgehensweise für Drucker, bei denen ein automatischer Duplexer installiert ist. Wenn im Drucker kein automatischer Duplexer installiert ist oder um auf Papiersorten zu drucken, die vom Duplexer nicht unterstützt werden, können Sie beide Seiten manuell bedrucken. 1. Wählen Sie im Softwareprogramm die Option Drucken. 2.
52 6. Nehmen Sie den gedruckten Stapel aus dem Ausgabefach, und legen Sie ihn in Fach 1. 7. Wenn Sie dazu aufgefordert werden, wählen Sie die entsprechende Schaltfläche, um fortzufahren.
Drucken mehrerer Seiten pro Blatt (Windows) 1. Wählen Sie im Softwareprogramm die Option Drucken. 2. Wählen Sie den Drucker aus der Liste der Drucker aus, und klicken Sie anschließend auf die Schaltfläche Eigenschaften oder Einstellungen, um den Druckertreiber zu öffnen. HINWEIS: Der Name der Schaltfläche variiert für verschiedene Softwareprogramme. HINWEIS: In Windows 10, 8.1 und 8 unterscheiden sich die Anwendungen in Layout und Funktionen von den nachfolgend beschriebenen Desktop-Anwendungen.
7. Wählen Sie die Schaltfläche OK aus, um die erkannten Spezifikationen (Format und Sorte) zu akzeptieren, oder wählen Sie Ändern aus, um ein anderes Papierformat bzw. eine andere Papiersorte auszuwählen. 8. Wählen Sie das korrekte Papierformat und die korrekte Papiersorte aus, und berühren Sie OK. Weitere Druckaufgaben Wechseln Sie zur Website www.hp.com/support/ljM148MFP, www.hp.com/support/ljM227MFP.
Druckaufträge (OS X) Druckanleitung (OS X) Die folgende Vorgehensweise beschreibt den grundlegenden Druckvorgang für OS X. 1. Klicken Sie auf das Menü Datei und dann auf die Option Drucken. 2. Wählen Sie den Drucker aus. 3. Klicken Sie auf Details anzeigen oder Kopien und Seiten, und wählen Sie weitere Menüs aus, um die Druckeinstellungen zu konfigurieren. HINWEIS: 4. Der Name des Elements variiert für verschiedene Softwareprogramme. Klicken Sie auf die Schaltfläche Drucken.
7. Nehmen Sie den bedruckten Stapel aus dem Ausgabefach, und legen Sie ihn mit der bedruckten Seite nach unten in das Zufuhrfach ein. 8. Wenn Sie dazu aufgefordert werden, berühren Sie die entsprechende Schaltfläche auf dem Bedienfeld, um fortzufahren. Drucken mehrerer Seiten pro Blatt (OS X) 1. Klicken Sie auf das Menü Datei und dann auf die Option Drucken. 2. Wählen Sie den Drucker aus. 3. Klicken Sie auf Details anzeigen oder Kopien und Seiten, und klicken Sie anschließend auf das Menü Layout.
DEWW ● Erstellen und Verwenden von Druckverknüpfungen ● Wählen eines Papierformats oder Verwenden eines benutzerdefinierten Papierformats ● Auswählen der Seitenausrichtung ● Erstellen einer Broschüre ● Größenanpassung eines Dokuments an ein ausgewähltes Papierformat ● Drucken der ersten oder letzten Seite eines Dokuments auf anderem Papier ● Drucken von Wasserzeichen auf ein Dokument Druckaufträge (OS X) 57
Mobiles Drucken Einführung HP hat mehrere Mobile- und ePrint-Lösungen im Angebot, um einfaches Drucken an einen HP Drucker von einem Laptop, Tablet, Smartphone oder anderem mobilen Gerät zu ermöglichen. Die vollständige Liste und weitere Informationen darüber, welche Lösung am besten geeignet ist, finden Sie unter www.hp.com/go/ LaserJetMobilePrinting. HINWEIS: Aktualisieren Sie die Drucker-Firmware, um sicherzustellen, dass alle Funktionen für mobiles Drucken und ePrint unterstützt werden.
HINWEIS: Wenn der Druckername nicht angezeigt wird, befinden Sie sich möglicherweise außerhalb des Bereichs des Wi-Fi Direct-Signals. Bewegen Sie das Gerät näher an den Drucker. 6. Wenn Sie dazu aufgefordert werden, geben Sie das Wi-Fi Direct-Kennwort ein, oder wählen Sie auf dem Bedienfeld des Druckers OK aus.
HINWEIS: Berühren Sie im Bedienfeld des Druckers auf dem Startbildschirm die Schaltfläche „Verbindungsinformationen“ , um auf das Wi-Fi Direct-Kennwort zuzugreifen. 7. Öffnen Sie das Dokument, und wählen Sie anschließend die Option Drucken aus. HINWEIS: Wenn das mobile Gerät die Druckfunktion nicht unterstützt, installieren Sie die mobile App HP ePrint. 8. Wählen Sie den Drucker aus der Liste verfügbarer Drucker aus, und wählen Sie dann Drucken aus. 9.
Ändern des Wi-Fi Direct-Namens des Druckers Gehen Sie folgendermaßen vor, um den Wi-Fi Direct-Namen des Druckers mit dem integrierten HP Web Server (EWS) zu ändern: Schritt 1: Öffnen des integrierten HP Webservers 1. Zweizeilige Bedienfelder: Drücken Sie auf dem Bedienfeld des Druckers die Taste „Einrichten“ . Öffnen Sie das Menü Netzwerk-Setup und wählen Sie dann IP-Adresse anzeigen, um die IP-Adresse oder den Hostnamen anzuzeigen.
1 2 1 Zweizeiliges Bedienfeld (Faxmodelle) 2 Zweizeiliges Bedienfeld 3 Bedienfeld mit Touchscreen 3 Zweizeilige Bedienfelder 1. Drücken Sie auf dem Bedienfeld des Druckers die Taste „Einrichten“ . Öffnen Sie das Menü Netzwerk-Setup und wählen Sie dann IP-Adresse anzeigen, um die IP-Adresse oder den Hostnamen anzuzeigen. 2. Öffnen Sie einen Webbrowser. Geben Sie die IP-Adresse oder den Hostnamen genau so in die Adresszeile ein, wie sie bzw. er auf dem Bedienfeld des Druckers angezeigt wird.
3. Berühren Sie die Schaltfläche Drucken, um die Nutzungsbedingungen zu lesen. Schaltfläche OK berühren, um die Nutzungsbedingungen zu akzeptieren und HP Web Services zu verwenden Der Drucker aktiviert Web Services und druckt anschließend eine Informationsseite aus. Die Informationsseite enthält den Druckercode, der zum Registrieren des HP Druckers bei HP Connected erforderlich ist. 4. Gehen Sie zum Erstellen eines HP ePrint-Kontos zu www.hpconnected.com, und schließen Sie den Einrichtungsprozess ab.
Um AirPrint zu verwenden, muss der Drucker mit demselben Netzwerk (Subnetz) wie das Apple-Gerät verbunden sein. Weitere Informationen zur Verwendung von AirPrint und den damit kompatiblen HP Druckern finden Sie unter www.hp.com/go/LaserJetMobilePrinting. HINWEIS: Überprüfen Sie die Versionsnummer, bevor Sie AirPrint über eine USB-Verbindung verwenden. AirPrint-Version 1.3 und frühere Versionen unterstützen keine USB-Verbindungen.
Direktdruck über USB verwenden (nur Modelle mit Touchscreen) Einführung Dieser Drucker bietet Direktdruck über USB. Auf diese Weise können Sie Dateien schnell drucken, ohne sie vom Computer zu senden. Der Drucker akzeptiert standardmäßige USB-Flash-Laufwerke im USB-Anschluss. Es werden folgende Dateitypen unterstützt: ● .PDF ● .jpg ● .prn und .PRN ● .cht und .CHT ● .pxl ● .pcl und .PCL ● .ps und .PS Schritt 1: Zugriff auf USB-Dateien im Drucker 1.
4. Wählen Sie Drucken, um das Dokument zu drucken. 5. Nehmen Sie den gedruckten Job aus dem Ausgabefach, und entfernen Sie den USB-Stick. Option 2: Fotos drucken 66 1. Wählen Sie zum Drucken von Fotos Fotos anzeigen und drucken. 2. Wählen Sie die Miniaturansicht des jeweiligen zu druckenden Fotos, und wählen Sie dann OK. 3.
5 Kopieren ● Erstellen einer Kopie ● Kopieren auf beiden Seiten (Duplex) ● Weitere Kopieraufgaben Siehe auch: Die folgenden Informationen sind zum Zeitpunkt der Veröffentlichung richtig. Aktuelle Informationen finden Sie unter www.hp.com/support/ljM148MFP, www.hp.com/support/ljM227MFP.
Erstellen einer Kopie HINWEIS: Die Schritte variieren in Abhängigkeit vom Typ des Bedienfelds. 1 2 1 Zweizeiliges Bedienfeld (Faxmodelle) 2 Zweizeiliges Bedienfeld 3 Bedienfeld mit Touchscreen 3 Zweizeilige Bedienfelder: 1. Legen Sie das Dokument auf das Scannerglas gemäß den Indikatoren auf dem Drucker. 2. Drücken Sie die Taste Kopiermenü 3.
3. DEWW Berühren Sie zum Optimieren der Kopierqualität die Schaltfläche Einstellungen, und blättern Sie dann zur Schaltfläche Optimieren, und berühren Sie diese. Wischen Sie über den Bedienfeldbildschirm, um durch die Optionen zu blättern, und berühren Sie anschließend eine Option, um sie auszuwählen. Die folgenden Einstellungen für die Kopierqualität sind verfügbar: ● Autom. Auswahl: Verwenden Sie diese Einstellung, wenn die Qualität der Kopie keine Rolle spielt. Dies ist die Standardeinstellung.
Kopieren auf beiden Seiten (Duplex) Manueller beidseitiger Druck ● Manueller beidseitiger Druck HINWEIS: Die Schritte variieren in Abhängigkeit vom Typ des Bedienfelds. 1 2 1 Zweizeiliges Bedienfeld (Faxmodelle) 2 Zweizeiliges Bedienfeld 3 Bedienfeld mit Touchscreen 3 Zweizeilige Bedienfelder: 1. Legen Sie das Dokument mit der zu scannenden Seite nach unten auf das Scannerglas. Die linke obere Ecke des Dokuments muss sich an der linken oberen Ecke des Glases befinden.
DEWW 3. Berühren Sie die Schaltfläche Einstellungen. 4. Blättern Sie zur Schaltfläche Beidseitig, und berühren Sie sie. 5. Wischen Sie durch die Optionen, und berühren Sie dann eine Option, um diese auszuwählen. 6. Berühren Sie die Schaltfläche Kopieren starten, um den Kopiervorgang zu starten. 7. Der Drucker fordert Sie zum Auflegen des nächsten Originaldokuments auf. Legen Sie es auf das Glas, und berühren Sie anschließend die Schaltfläche OK. 8.
Weitere Kopieraufgaben Wechseln Sie zur Website www.hp.com/support/ljM148MFP, www.hp.com/support/ljM227MFP.
6 Scannen ● Scannen mit der Software HP Scan (Windows) ● Scannen mit der Software HP Easy Scan (OS X) ● Einrichten der Funktion „Scannen in E-Mails“ (nur Touchscreen-Modelle) ● Einrichten der Funktion „Scannen in Netzwerkordner“ (nur Touchscreen-Modelle) ● Scannen auf ein USB-Flash-Laufwerk (nur Modelle mit Touchscreen) ● Scannen in E-Mail (nur Modelle mit Touchscreen) ● Scannen in Netzwerkordner (nur Touchscreen-Modelle) ● Weitere Scanaufgaben Siehe auch: Die folgenden Informationen sind
Scannen mit der Software HP Scan (Windows) Verwenden Sie die Software HP Scan, um über die Software auf Ihrem Computer einen Scan zu starten. Sie können ein gescanntes Bild als Datei speichern oder an eine andere Softwareanwendung senden. 1. 74 Öffnen Sie den HP Druckerassistenten. ● Windows 10: Klicken Sie im Menü Start auf Alle Apps und anschließend auf HP, um den Namen des Druckers zu wählen. ● Windows 8.
Scannen mit der Software HP Easy Scan (OS X) Verwenden Sie die Software HP Easy Scan, um das Scannen mit Software auf Ihrem Computer zu initiieren. DEWW 1. Legen Sie das Dokument in die Dokumentenzufuhr oder auf das Scannerglas gemäß den Indikatoren auf dem Drucker. 2. Öffnen Sie auf dem Computer die Anwendung HP Easy Scan, die sich im Ordner Anwendungen befindet. 3. Befolgen Sie die Bildschirmanweisungen, um das Dokument zu scannen. 4.
Einrichten der Funktion „Scannen in E-Mails“ (nur TouchscreenModelle) ● Einführung ● Vorbereitungen ● Methode 1: Verwenden des Einrichtungsassistenten zum „Scannen in E-Mail“ (Windows) ● Methode 2: Einrichten der Funktion „Scannen an E-Mail“ über den integrierten HP Webserver (Windows) ● Einrichten der Funktion „Scannen in E-Mails“ auf einem Mac Einführung Der Drucker verfügt über eine Funktion, mit der Dokumente gescannt und an eine oder mehrere E-Mail-Adressen gesendet werden können.
HINWEIS: 1. 2. Manche Betriebssysteme unterstützen den Assistenten für Scannen in E-Mail nicht. Öffnen Sie den HP Druckerassistenten. ● Windows 10: Klicken Sie im Menü Start auf Alle Apps und anschließend auf HP, um den Namen des Druckers zu wählen. ● Windows 8.1: Klicken Sie unten links auf dem Start-Bildschirm auf den Abwärtspfeil, und wählen Sie anschließend den Druckernamen aus.
HINWEIS: Größe. HP empfiehlt die Verwendung der Standard-Dateigröße von Automatisch für die maximale 10. Wenn der SMTP-Server eine Authentifizierung zum Senden einer E-Mail erfordert, aktivieren Sie das Kontrollkästchen E-Mail-Anmeldungsauthentifizierung, geben Sie die Benutzer-ID und das Kennwort ein, und klicken Sie danach auf Weiter. 11. Wählen Sie auf der Seite 3.
4. Klicken Sie auf die Registerkarte Scannen. 5. Klicken Sie im linken Navigationsbereich auf den Link Profil für ausgehende E-Mail. 6. Klicken Sie auf der Seite Profile für ausgehende E-Mail auf die Schaltfläche Neu. 7. Füllen Sie im Bereich E-Mail-Adresse die folgenden Felder aus: 8. a. Geben Sie im Feld Ihre E-Mail-Adresse die E-Mail-Adresse des Absenders für das neue Profil für ausgehende E-Mails. b. Geben Sie im Feld Anzeigename den Namen des Absenders ein.
a. Wählen Sie in der Dropdown-Liste Maximalgröße für E-Mail-Nachrichtenanhänge die maximale Größe für E-Mail-Anhänge aus. HINWEIS: Größe. b. HP empfiehlt die Verwendung der Standard-Dateigröße von Automatisch für die maximale Um dem Absender automatisch eine Kopie von E-Mail-Nachrichten zu senden, die über das Profil gesendet werden, aktivieren Sie das Kontrollkästchen CC automatisch. 12.
b. iii. Wählen Sie Textkörper anzeigen aus, um die Anzeige des Standardtexts in E-Mails zu aktivieren. iv. Wählen Sie Textkörper ausblenden, um den Standardtext für eine E-Mail zu unterdrücken. Füllen Sie die folgenden Felder im Bereich Scan-Einstellungen aus: i. Wählen Sie das Standard-Dateiformat für gescannte Dateien in der Dropdown-Liste Scandateityp aus. ii. Wählen Sie in der Dropdown-Liste Scanpapierformat das Standardpapierformat für gescannte Dateien aus. iii.
Methode 2: Verwenden Sie das HP Dienstprogramm, um den integrierte HP Webserver (EWS) zu öffnen. 1. Öffnen Sie den Ordner Anwendungen, wählen Sie HP und anschließend HP Dienstprogramm aus. Der Hauptbildschirm des HP Dienstprogramms wird angezeigt. 2.
a. Aktivieren Sie das Kontrollkästchen SMTP-Authentifizierung für ausgehende E-Mail-Nachrichten ausführen. b. Geben Sie im Feld SMTP-Benutzer-ID die Benutzer-ID für den SMTP-Server ein. c. Geben Sie im Feld SMTP-Kennwort das Kennwort für den SMTP-Server ein. 10. Damit die Eingabe einer PIN auf dem Bedienfeld des Druckers erforderlich ist, bevor Sie eine E-Mail unter Verwendung der E-Mail-Adresse gesendet wird, müssen Sie die folgenden Felder im Bereich Optionale PIN ausfüllen: a.
a. Klicken Sie auf Neue Gruppe. b. Geben Sie im Feld Eingabe des Gruppennamens einen Namen für die neue Gruppe ein. c. Klicken Sie im Bereich Alle Personen auf einen Namen, und klicken Sie dann auf die Pfeiltaste, um ihn in den Bereich Personen in der Gruppe zu verschieben. HINWEIS: Wählen Sie gleichzeitig mehrere Namen aus, indem Sie STRG drücken und dann auf einen Namen klicken. d. Klicken Sie auf Speichern.
Einrichten der Funktion „Scannen in Netzwerkordner“ (nur Touchscreen-Modelle) ● Einführung ● Vorbereitungen ● Methode 1: Verwenden des Einrichtungsassistenten zum Scannen in Netzwerkordner (Windows) ● Methode 2: Einrichten der Funktion „Scannen in Netzwerkordner“ über den integrierten HP Webserver (Windows) ● Einrichten der Funktion „Scannen in Netzwerkordner“ auf einem Mac Einführung Der Drucker verfügt über eine Funktion, mit der Dokumente gescannt und in einem Netzwerkordner gespeichert werden
2. ● Windows 8: Klicken Sie auf dem Start-Bildschirm mit der rechten Maustaste in einen leeren Bereich, klicken Sie in der App-Leiste auf Alle Apps, und wählen Sie dann den Namen des Druckers aus. ● Windows 7: Klicken Sie auf dem Computerdesktop auf Start und wählen Sie Alle Programme aus. Klicken Sie auf HP und den Ordner für den Drucker und wählen Sie dann den Druckernamen aus. Wählen Sie im HP Druckerassistenten die Option Scannen und anschließend Assistent für Scannen in Netzwerkordner aus.
7. Damit die Eingabe einer PIN auf dem Bedienfeld des Druckers erforderlich ist, bevor der Drucker ein gescanntes Dokument an den Netzwerkordner senden kann, geben Sie eine vierstellige PIN in das Feld Sicherheits-PIN ein, und geben Sie die PIN erneut in das Feld Sicherheits-PIN bestätigen ein. Klicken Sie auf Weiter. HINWEIS: HP empfiehlt das Erstellen einer PIN, um den Zielordner zu schützen.
2. Öffnen Sie einen Webbrowser. Geben Sie die IP-Adresse oder den Hostnamen genau so in die Adresszeile ein, wie sie bzw. er auf dem Bedienfeld des Druckers angezeigt wird. Drücken Sie auf der Computertastatur die Eingabetaste. Der integrierte HP Webserver wird geöffnet. HINWEIS: Wenn eine Meldung angezeigt wird, dass der Zugriff auf die Website eventuell nicht sicher ist, wählen Sie die Option zum Aufrufen der Website. Der Computer wird durch den Zugriff auf diese Website nicht beschädigt.
HINWEIS: Bilder höherer Auflösung verfügen über mehr dpi (Punkte pro Zoll) und sind daher detailgenauer. Bilder mit geringerer Auflösung verfügen über weniger dpi (Punkte pro Zoll) und sind weniger detailgenau, die Datei benötigt jedoch weniger Speicherplatz. d. Wählen Sie in der Dropdownliste Ausgabefarbe aus, ob es sich bei den gescannten Dateien um Schwarzweiß- oder Farbversionen handeln soll. e. Geben Sie im Feld Dateinamenpräfix ein Präfix für Dateinamen (z. B. MyScan) ein. 10.
● Klicken Sie im Bereich Druckereinstellungen auf „Weitere Einstellungen“, und klicken Sie dann auf Integrierten Webserver öffnen. ● Klicken Sie im Bereich Scan-Einstellungen auf Scannen in Netzwerkordner, und klicken Sie dann auf Meinen freigegebenen Ordner registrieren.... HINWEIS: Wenn Sie über keinen freigegebenen Netzwerkordner verfügen, klicken Sie auf Hilfe bei dieser Aufgabe, um Informationen über das Erstellen des Ordners anzuzeigen. Der integrierte HP Webserver (EWS) wird geöffnet.
c. Wählen Sie in der Dropdown-Liste Scanauflösung die Standard-Scanauflösung für gescannte Dateien aus. HINWEIS: Bilder höherer Auflösung verfügen über mehr dpi (Punkte pro Zoll) und sind daher detailgenauer. Bilder mit geringerer Auflösung verfügen über weniger dpi (Punkte pro Zoll) und sind weniger detailgenau, die Datei benötigt jedoch weniger Speicherplatz. d. Wählen Sie in der Dropdownliste Ausgabefarbe aus, ob es sich bei den gescannten Dateien um Schwarzweiß- oder Farbversionen handeln soll. e.
Scannen auf ein USB-Flash-Laufwerk (nur Modelle mit Touchscreen) 1. Legen Sie das Dokument auf das Scannerglas oder in die Dokumentenzufuhr gemäß den Indikatoren auf dem Gerät. 2. Verbinden Sie ein USB-Flash-Laufwerk mit dem Direktdruck-USB-Anschluss. 3. Das Menü USB-Stick wird mit den folgenden Optionen geöffnet: ● Dokumente drucken ● Fotos anzeigen und drucken ● Scannen in USB-Laufwerk 4. Wählen Sie Scannen in USB-Laufwerk aus. 5.
Scannen in E-Mail (nur Modelle mit Touchscreen) Verwenden Sie das Bedienfeld des Druckers, um eine Datei direkt in eine E-Mail zu scannen. Die gescannte Datei wird dann als E-Mail-Anhang an die angegebene Adresse gesendet. HINWEIS: Um diese Funktion zu nutzen, muss der Drucker mit einem Netzwerk verbunden sein, und die Funktion „Scannen in E-Mail“ muss mit Hilfe des Einrichtungsassistenten zum Scannen in E-Mail (Windows) oder des integrierten HP Webservers konfiguriert sein. 1.
Scannen in Netzwerkordner (nur Touchscreen-Modelle) Verwenden Sie das Bedienfeld des Druckers, um ein Dokument zu scannen und in einem Ordner im Netzwerk zu speichern. HINWEIS: Um diese Funktion zu nutzen, muss der Drucker mit einem Netzwerk verbunden sein, und die Funktion „Scannen in Netzwerkordner“ muss mit Hilfe des Einrichtungsassistenten zum Scannen in Netzwerkordner (Windows) oder des integrierten HP Webservers konfiguriert sein. 1.
Weitere Scanaufgaben Wechseln Sie zur Website www.hp.com/support/ljM148MFP, www.hp.com/support/ljM227MFP.
96 Kapitel 6 Scannen DEWW
7 Faxen ● Einrichten zum Senden und Empfangen von Faxen ● Senden von Faxen ● Weitere Faxaufgaben Siehe auch: Die folgenden Informationen sind zum Zeitpunkt der Veröffentlichung richtig. Aktuelle Informationen finden Sie unter www.hp.com/support/ljM148MFP, www.hp.com/support/ljM227MFP.
Einrichten zum Senden und Empfangen von Faxen ● Vor dem Start ● Schritt 1: Identifizieren des Telefonverbindungstyps ● Schritt 2: Einrichten der Faxfunktion ● Schritt 3: Konfigurieren der Uhrzeit, des Datums und der Kopfzeile des Faxgeräts ● Schritt 4: Durchführen eines Faxtests Vor dem Start Stellen Sie sicher, dass der Drucker vollständig eingerichtet ist, bevor Sie eine Verbindung mit dem Faxdienst herstellen.
● DSL-Leitung: Ein Dienst für einen digitalen Teilnehmeranschluss (Digital Subscriber Line, DSL) einer Telefongesellschaft; in einigen Ländern/Regionen wird dieser Dienst möglicherweise als „ADSL“ bezeichnet ● Nebenstellenanlage oder ISDN-Telefonanlage: Eine Nebenstellenanlage (PBX) oder eine ISDN-Anlage (Integrated Services Digital Network) ● VoIP-Telefonanlage: Voice over Internet Protocol (VoIP) über einen Internetanbieter Schritt 2: Einrichten der Faxfunktion Klicken Sie auf den Link unten, der di
2. 3. Richten Sie den Drucker so ein, dass Faxnachrichten automatisch beantwortet werden. a. Schalten Sie den Drucker ein. b. Öffnen Sie auf dem Bedienfeld das Menü Einrichtung . c. Wählen Sie das Menü Faxeinrichtung. d. Wählen Sie das Menü Basis-Setup. e. Wählen Sie die Einstellung Rufannahmemodus. f. Wählen Sie die Option Automatisch. Fahren Sie hier fort: Schritt 3: Konfigurieren der Uhrzeit, des Datums und der Kopfzeile des Faxgeräts auf Seite 103.
3. Ziehen Sie den Stecker aus dem Telefonanschluss für die Amtsleitung auf der Rückseite des Druckers, und schließen Sie das Telefon an diesen Anschluss an. 4. Richten Sie den Drucker so ein, dass Faxnachrichten automatisch beantwortet werden. 5. a. Schalten Sie den Drucker ein. b. Öffnen Sie auf dem Bedienfeld das Menü Einrichtung . c. Wählen Sie das Menü Faxeinrichtung. d. Wählen Sie das Menü Basis-Setup. e.
3. Schließen Sie das Telefonkabel am Faxanschluss am Drucker und an der Telefonbuchse an der Wand an. HINWEIS: In einigen Ländern/Regionen ist möglicherweise ein Adapter für das im Lieferumfang des Druckers enthaltene Telefonkabel erforderlich. HINWEIS: Bei einigen Druckern befindet sich der Faxanschluss möglicherweise über dem Telefonanschluss. Achten Sie auf die Symbole auf dem Drucker. 4.
6. 7. e. Wählen Sie die Option Rufzeichen vor Annahme. f. Verwenden Sie das numerische Tastenfeld auf dem Bedienfeld des Druckers, um die Anzahl der Rufzeichen auf fünf oder mehr einzustellen, und wählen Sie anschließend OK aus. Richten Sie den Drucker so ein, dass Faxnachrichten automatisch beantwortet werden. a. Öffnen Sie auf dem Bedienfeld das Menü Einrichtung . b. Wählen Sie das Menü Faxeinrichtung. c. Wählen Sie das Menü Basis-Setup. d.
● Windows 8: Klicken Sie auf dem Start-Bildschirm mit der rechten Maustaste in einen leeren Bereich, klicken Sie in der App-Leiste auf Alle Apps, und wählen Sie dann den Namen des Druckers aus. ● Windows 7: Klicken Sie auf dem Computerdesktop auf Start und wählen Sie Alle Programme aus. Klicken Sie auf HP und den Ordner für den Drucker und wählen Sie dann den Druckernamen aus. 2. Wählen Sie im HP Druckerassistenten die Option Fax und anschließend Faxeinrichtungsassistent aus. 3.
b. ● Windows 10: Klicken Sie im Menü Start auf Alle Apps und anschließend auf HP, um den Namen des Druckers zu wählen. ● Windows 8.1: Klicken Sie unten links auf dem Start-Bildschirm auf den Abwärtspfeil, und wählen Sie anschließend den Druckernamen aus. ● Windows 8: Klicken Sie auf dem Start-Bildschirm mit der rechten Maustaste in einen leeren Bereich, klicken Sie in der App-Leiste auf Alle Apps, und wählen Sie dann den Namen des Druckers aus.
● Wenn dem Bericht zu entnehmen ist, dass der Drucker den Test bestanden hat, ist der Drucker dazu bereit, Faxnachrichten zu senden und zu empfangen. ● Wenn dem Bericht zu entnehmen ist, dass der Drucker den Test nicht bestanden hat, prüfen Sie den Bericht auf weitere Informationen zum Beheben des Problems. Die Checkliste für die Fehlerbehebung beim Faxen enthält weitere Informationen zum Beheben von Problemen beim Faxen.
Senden von Faxen ● Senden von Faxen vom Flachbettscanner aus ● Faxen über den Vorlageneinzug ● Verwenden von Kurz- und Gruppenwahleinträgen ● Senden von Faxen von der Software aus ● Senden von Faxen von einem Softwareprogramm eines Drittanbieters, z. B. Microsoft Word Senden von Faxen vom Flachbettscanner aus 1. Legen Sie das Dokument mit der zu kopierenden Seite nach unten auf das Scannerglas. HEW 2. Berühren Sie auf dem Bedienfeld des Druckers auf dem Startbildschirm das Symbol Fax . 3.
Faxen über den Vorlageneinzug 1. Legen Sie die Vorlagen mit der bedruckten Seite nach oben in den Vorlageneinzug ein. ACHTUNG: Um eine Beschädigung des Druckers zu verhindern, verwenden Sie keine Originale, die Korrekturtape, Korrekturflüssigkeit, Büroklammern oder Heftklammern enthalten. Außerdem sollten Sie weder Fotos noch kleine oder empfindliche Vorlagen in den Vorlageneinzug einlegen. 2. 123 Stellen Sie die Papierführungen so ein, dass sie den Papierstapel leicht berühren. 123 3.
2. Berühren Sie auf dem Bedienfeld des Druckers auf dem Startbildschirm das Symbol Fax . 3. Berühren Sie auf dem Tastenfeld das Symbol für das Faxtelefonbuch. 4. Berühren Sie den Namen des Einzel- und Gruppeneintrags, der verwendet werden soll. 5. Berühren Sie die Schaltfläche zum Starten des Faxvorgangs. Senden von Faxen von der Software aus Die Vorgehensweise hängt von Ihren Spezifikationen ab. Hier wird der typische Ablauf dargestellt. 1. Öffnen Sie den HP Druckerassistenten.
Weitere Faxaufgaben Wechseln Sie zur Website www.hp.com/support/ljM148MFP, www.hp.com/support/ljM227MFP.
8 Verwalten des Druckers ● Verwenden von Anwendungen der HP Web Services (nur Modelle mit Touchscreen) ● Ändern Sie die Druckerverbindungsart (Windows) ● Erweiterte Konfiguration mit integriertem HP Webserver (EWS) und Toolbox für HP Gerät (Windows) ● Erweiterte Konfiguration mit dem HP Dienstprogramm für OS X ● Konfigurieren der IP-Netzwerkeinstellungen ● Sicherheitsfunktionen des Druckers ● Konfigurieren der Einstellungen des leisen Druckmodus ● Energiespareinstellungen ● Aktualisieren
Verwenden von Anwendungen der HP Web Services (nur Modelle mit Touchscreen) HP Web Services-Anwendungen bieten nützliche Inhalte, die automatisch aus dem Internet auf den Drucker heruntergeladen werden können. Sie können aus einer Vielzahl von Anwendungen wie Nachrichten, Kalender, Formularen und Cloud-basierter Dokumentenspeicherung auswählen. Besuchen Sie zum Aktivieren dieser Anwendungen und zur Planung der Downloads die HP Connected-Website unter www.hpconnected.
Ändern Sie die Druckerverbindungsart (Windows) Wenn Sie den Drucker bereits verwenden und die Verbindungsart ändern möchten, verwenden Sie Geräteinstallation und Software, um die Verbindung zu ändern. Schließen Sie z. B. den neuen Drucker über eine USB- oder Netzwerkverbindung an den Computer an, oder ändern Sie die Verbindungsart, und verwenden Sie statt des USB-Anschlusses eine drahtlose Verbindung. Gehen Sie zum Öffnen von Geräteinstallation und Software wie folgt vor: 1. 2.
Erweiterte Konfiguration mit integriertem HP Webserver (EWS) und Toolbox für HP Gerät (Windows) Mit dem integrierten HP Webserver können Sie vom Computer aus die Druckfunktionen verwalten. Sie brauchen die Einstellungen nicht direkt am Drucker vorzunehmen. ● Anzeigen von Statusinformationen für den Drucker ● Ermitteln des verbleibenden Verbrauchsmaterials und ggf.
1 2 1 Zweizeiliges Bedienfeld (Faxmodelle) 2 Zweizeiliges Bedienfeld 3 Bedienfeld mit Touchscreen 1. 3 Zweizeilige Bedienfelder: Drücken Sie auf dem Bedienfeld des Druckers auf die Taste . Öffnen Sie das Menü Netzwerk-Setup und wählen Sie dann IP-Adresse anzeigen, um die IP-Adresse oder den Hostnamen anzuzeigen.
Registerkarte oder Bereich Beschreibung Registerkarte Home ● Stellt Drucker-, Status- und Konfigurationsinformationen bereit. Gerätestatus: Zeigt den Druckerstatus und die ungefähr verbleibende Gebrauchsdauer für das HP Verbrauchsmaterial in Prozent an. ● Verbrauchsmaterial-Status: Zeigt die ungefähr verbleibende Gebrauchsdauer des HP Verbrauchsmaterials in Prozent an. Die tatsächlich verbleibende Gebrauchsdauer kann variieren.
Registerkarte oder Bereich Beschreibung System (Registerkarte) ● Hier können Sie den Drucker über Ihren Computer konfigurieren. Geräteinformationen: Hiermit werden grundlegende Drucker- und Herstellerinformationen angezeigt. ● Papier-Setup: Hiermit können Sie die Standard-Papierzufuhreinstellungen für den Drucker ändern. ● Druckqualität: Hiermit können Sie die Standardeinstellungen der Druckqualität für den Drucker ändern.
Registerkarte oder Bereich Beschreibung Registerkarte Scannen Konfigurieren Sie die Funktionen Scannen in Netzwerkordner und Scannen in E-Mail. (Nur MFP-Drucker) ● Netzwerkordner-Einrichtung: Hier konfigurieren Sie Ordner im Netzwerk, in denen der Drucker eine gescannte Datei speichern kann. ● Einrichtung für Scannen in E-Mail: Hierüber starten Sie das Verfahren zum Einrichten der Funktion Scannen in E-Mail.
Erweiterte Konfiguration mit dem HP Dienstprogramm für OS X Verwenden Sie das HP Dienstprogramm, um den Druckerstatus zu überprüfen oder die Druckereinstellungen auf dem Computer anzuzeigen oder zu ändern. Sie können das HP Dienstprogramm nutzen, wenn der Drucker über ein USB-Kabel angeschlossen oder mit einem TCP/IP-Netzwerk verbunden ist. Öffnen des HP Dienstprogramms 1. Öffnen Sie auf dem Computer den Ordner Anwendungen. 2. Wählen Sie HP und anschließend HP Dienstprogramm aus.
Komponente Beschreibung Datei hochladen Übertragen Sie Dateien vom Computer auf den Drucker. Sie können folgende Dateitypen herunterladen: ○ HP LaserJet Printer Command Language (.PRN) ○ Portable Document Format (.PDF) ○ PostScript (.PS) ○ Text (.TXT) Energiesparverwaltung Konfigurieren der Druckereinstellungen zum Sparen von Energie und Verbrauchsmaterial. Firmware aktualisieren Übertragen einer Firmwareupdate-Datei an den Drucker.
Komponente Beschreibung Scannen in E-Mail Öffnen der Seite des integrierten HP Webservers (EWS) zur Konfiguration der Einstellungen für das Scannen in E-Mail. (Nur MFP-Drucker) Scannen in Netzwerkordner (Nur MFP-Drucker) DEWW Öffnen der Seite des integrierten HP Webservers (EWS) zur Konfiguration der Einstellungen für das Scannen in einen Netzwerkordner.
Konfigurieren der IP-Netzwerkeinstellungen ● Einführung ● Haftungsausschluss bei gemeinsamer Druckernutzung ● Abrufen oder Ändern der Netzwerkeinstellungen ● Umbenennen des Druckers in einem Netzwerk ● Manuelles Konfigurieren von IPv4-TCP/IP-Parametern über das Bedienfeld ● Verbindungsgeschwindigkeit und Duplexmodus Einführung Konfigurieren Sie die Netzwerkeinstellung des Druckers anhand der folgenden Abschnitte.
a. Zweizeilige Bedienfelder: Drücken Sie auf dem Bedienfeld des Druckers auf die Taste . Öffnen Sie das Menü Netzwerk-Setup und wählen Sie dann IP-Adresse anzeigen, um die IP-Adresse oder den Hostnamen anzuzeigen. Bedienfelder mit Touchscreen: Berühren Sie auf dem Startbildschirm des Druckerbedienfelds die Schaltfläche „Verbindungsdaten“ , und berühren Sie dann die Schaltfläche Verbundenes Netzwerk anzuzeigen. b.
a. Zweizeilige Bedienfelder: Drücken Sie auf dem Bedienfeld des Druckers auf die Taste . Öffnen Sie das Menü Netzwerk-Setup und wählen Sie dann IP-Adresse anzeigen, um die IP-Adresse oder den Hostnamen anzuzeigen. Bedienfelder mit Touchscreen: Berühren Sie auf dem Startbildschirm des Druckerbedienfelds die Schaltfläche „Verbindungsdaten“ , und berühren Sie dann die Schaltfläche Verbundenes Netzwerk anzuzeigen. b.
Zweizeilige Bedienfelder 1. Drücken Sie auf dem Bedienfeld des Druckers auf die Taste 2. Öffnen Sie die folgenden Menüs: 3. ● Netzwerk-Setup ● IPv4-Konfigurationsmethode ● Manuell . Geben Sie die IP-Adresse, Subnetzmaske und das Standardgateway mit Hilfe der Pfeiltasten und der Schaltfläche OK ein, und berühren Sie anschließend die Schaltfläche OK, um die Änderungen zu speichern. Bedienfelder mit Touchscreen 1.
HINWEIS: Die Schritte variieren in Abhängigkeit vom Typ des Bedienfelds. 1 2 1 Zweizeiliges Bedienfeld (Faxmodelle) 2 Zweizeiliges Bedienfeld 3 Bedienfeld mit Touchscreen 1. 3 Zweizeilige Bedienfelder: Drücken Sie auf dem Bedienfeld des Druckers auf die Taste . Bedienfelder mit Touchscreen: Wischen Sie auf dem Bedienfeld des Druckers auf dem Startbildschirm, bis das Einrichtungsmenü angezeigt wird. Tippen Sie auf das Symbol Setup , um das Menü zu öffnen. 2. 3. 4.
Sicherheitsfunktionen des Druckers Einführung Der Drucker verfügt über mehrere Sicherheitsfunktionen zur Einschränkung des Zugriffs auf die Konfigurationseinstellungen, zur Sicherung von Daten und zur Vermeidung des Zugangs zu wertvollen Hardwarekomponenten.
b. Öffnen Sie einen Webbrowser. Geben Sie die IP-Adresse oder den Hostnamen genau so in die Adresszeile ein, wie sie bzw. er auf dem Bedienfeld des Druckers angezeigt wird. Drücken Sie auf der Computertastatur die Eingabetaste. Der integrierte HP Webserver wird geöffnet. HINWEIS: Wenn eine Meldung angezeigt wird, dass der Zugriff auf die Website eventuell nicht sicher ist, wählen Sie die Option zum Aufrufen der Website. Der Computer wird durch den Zugriff auf diese Website nicht beschädigt. 2.
Konfigurieren der Einstellungen des leisen Druckmodus Einführung Dieser Drucker verfügt über einen Modus, bei dem die Geräusche während des Druckens reduziert werden. Wenn der geräuscharme Modus eingeschaltet ist, druckt der Drucker mit einer geringeren Geschwindigkeit. HINWEIS: kann. Der leise Druckmodus verlangsamt die Druckgeschwindigkeit, was die Druckqualität verbessern Verwenden Sie eine der folgenden Methoden, um die Einstellungen für den leisen Druckmodus zu konfigurieren.
Methode 2: Konfigurieren der Einstellungen für den leisen Druckmodus über den integrierten HP Webserver (EWS) HINWEIS: Die Schritte variieren in Abhängigkeit vom Typ des Bedienfelds. 1 2 1 Zweizeiliges Bedienfeld (Faxmodelle) 2 Zweizeiliges Bedienfeld 3 Bedienfeld mit Touchscreen 1. 3 Zweizeilige Bedienfelder: Drücken Sie auf dem Bedienfeld des Druckers die Taste „Einrichten“ .
Energiespareinstellungen ● Einführung ● Drucken im EconoMode ● Konfigurieren der Einstellung „Bereitschaft/Automatisches Ausschalten nach Inaktivität“ ● Festlegen der Verzögerung für „Automatisches Ausschalten nach Inaktivität“ und Konfigurieren des Druckers, so dass er höchstens 1 Watt verbraucht ● Konfigurieren der Einstellung „Verzögerung für Ausschalten“ Einführung Der Drucker enthält mehrere Funktionen, mit denen Sie Energie und Verbrauchsmaterial sparen können.
HINWEIS: Die Schritte variieren in Abhängigkeit vom Typ des Bedienfelds. 1 2 1 Zweizeiliges Bedienfeld (Faxmodelle) 2 Zweizeiliges Bedienfeld 3 Bedienfeld mit Touchscreen 1. 3 Zweizeilige Bedienfelder: Drücken Sie auf dem Bedienfeld des Druckers auf die Taste . Bedienfelder mit Touchscreen: Wischen Sie auf dem Bedienfeld des Druckers auf dem Startbildschirm, bis das Einrichtungsmenü angezeigt wird. Tippen Sie auf das Symbol Setup , um das Menü zu öffnen. 2. 3.
HINWEIS: Die Schritte variieren in Abhängigkeit vom Typ des Bedienfelds. 1 2 1 Zweizeiliges Bedienfeld (Faxmodelle) 2 Zweizeiliges Bedienfeld 3 Bedienfeld mit Touchscreen 1. 3 Zweizeilige Bedienfelder: Drücken Sie auf dem Bedienfeld des Druckers auf die Taste . Bedienfelder mit Touchscreen: Wischen Sie auf dem Bedienfeld des Druckers auf dem Startbildschirm, bis das Einrichtungsmenü angezeigt wird. Tippen Sie auf das Symbol Setup , um das Menü zu öffnen. 2. 3.
HINWEIS: Die Schritte variieren in Abhängigkeit vom Typ des Bedienfelds. 1 2 1 Zweizeiliges Bedienfeld (Faxmodelle) 2 Zweizeiliges Bedienfeld 3 Bedienfeld mit Touchscreen 1. 3 Zweizeilige Bedienfelder: Drücken Sie auf dem Bedienfeld des Druckers auf die Taste . Bedienfelder mit Touchscreen: Wischen Sie auf dem Bedienfeld des Druckers auf dem Startbildschirm, bis das Einrichtungsmenü angezeigt wird. Tippen Sie auf das Symbol Setup , um das Menü zu öffnen. 2. 3.
Aktualisieren der Firmware HP veröffentlicht regelmäßig Druckeraktualisierungen sowie neue Web Services-Apps und ergänzt vorhandene Web Services-Apps um neue Funktionen. Führen Sie diese Schritte aus, um die auf einem Drucker installierte Firmware zu aktualisieren. Wenn Sie die Firmware aktualisieren, werden die Web Service-Apps automatisch aktualisiert. Es sind zwei unterstützte Methoden verfügbar, um auf diesem Drucker eine Firmware-Aktualisierung durchzuführen.
HINWEIS: Der Drucker prüft automatisch, ob eine aktuelle Version vorhanden ist. Wird eine neuere Version festgestellt, startet der Aktualisierungsvorgang automatisch. 5. Legen Sie fest, dass der Drucker bei Verfügbarkeit eines Updates automatisch die Firmware aktualisiert. Drücken Sie auf dem Bedienfeld des Druckers die Taste „Einrichten“ . Öffnen Sie das Menü Dienst und dann das Menü LaserJet Update, und wählen Sie anschließend das Menü Updates verwalten aus.
1. Rufen Sie die Seite www.hp.com/support auf, wählen Sie die Sprache Ihres Lands bzw. Ihrer Region aus, klicken Sie auf den Link Software/Treiber erhalten, geben Sie den Druckernamen in das Suchfeld ein, drücken Sie die Taste Eingabe, und wählen Sie den Drucker aus der Liste der Suchergebnisse aus. 2. Wählen Sie das Betriebssystem aus. 3. Suchen Sie im Abschnitt Firmware nach dem Dienstprogramm für Firmware-Updates. 4.
138 Kapitel 8 Verwalten des Druckers DEWW
9 Lösen von Problemen ● Kundendienst ● Hilfesystem für Bedienfeld (nur Modelle mit Touchscreen) ● Wiederherstellen der werkseitigen Standardeinstellungen ● Die Meldung „Patrone ist bald leer“ oder „Patrone ist fast leer“ erscheint auf dem Bedienfeld des Druckers ● Drucker zieht kein Papier ein oder Zufuhrprobleme ● Beheben von Papierstaus ● Reinigen der austauschbaren Folieneinheit des ADF ● Verbesserung der Druckqualität ● Verbessern von Kopier- und Scanqualität ● Verbessern der Faxqua
Kundendienst Telefonsupport für Ihr Land/Ihre Region Halten Sie bitte die Druckerbezeichnung, die Seriennummer, das Verkaufsdatum und eine Problembeschreibung bereit. Telefonnummern für Ihr Land/Ihre Region finden Sie auf dem Faltblatt, das dem Drucker beiliegt, oder auf der Website support.hp.com. Abrufen von Internet-Support rund um die Uhr und Herunterladen von Software-Dienstprogrammen, Treibern www.hp.com/support/ljM148MFP, www.hp.
Hilfesystem für Bedienfeld (nur Modelle mit Touchscreen) Der Drucker verfügt über ein integriertes Hilfesystem, in dem die Verwendung der einzelnen Bildschirme erläutert wird. Berühren Sie zum Öffnen des Hilfesystems die Hilfe-Schaltfläche unten links auf dem Bildschirm. Bei einigen Bildschirmen wird ein globales Menü geöffnet, in dem Sie nach bestimmten Themen suchen können. Durchsuchen Sie die Menüstruktur mit Hilfe der Menüschaltflächen.
Wiederherstellen der werkseitigen Standardeinstellungen Beim Wiederherstellen der werkseitigen Standardeinstellungen werden alle Drucker- und Netzwerkeinstellungen auf den ursprünglichen Zustand zurückgesetzt. Die Seitenanzahl oder das Fachformat werden nicht zurückgesetzt. Führen Sie zum Wiederherstellen der werkseitigen Standardeinstellungen für den Drucker die folgenden Schritte aus.
Die Meldung „Patrone ist bald leer“ oder „Patrone ist fast leer“ erscheint auf dem Bedienfeld des Druckers Niedriger Füllstand Patrone: Der Drucker zeigt an, wenn eine Patrone zur Neige geht. Die tatsächliche verbleibende Gebrauchsdauer der Patrone kann variieren. Besorgen Sie eine Ersatztonerpatrone für den Fall, dass der Drucker keine akzeptable Druckqualität mehr liefert. Die Patrone muss derzeit nicht ausgetauscht werden.
3. ● Patrone Schwarz oder Farbpatronen ● Sehr niedrige Einstellung Wählen Sie eine der folgenden Optionen aus: ● Wählen Sie die Option Weiter aus, um den Drucker so einzurichten, dass er eine Warnmeldung ausgibt, wenn die Patrone fast leer ist, der Druckvorgang jedoch fortgesetzt werden soll. ● Wählen Sie die Option Stopp aus, um den Drucker so einzurichten, dass der Druckvorgang so lange unterbrochen werden soll, bis die Patrone ausgetauscht wurde.
Drucker zieht kein Papier ein oder Zufuhrprobleme Einführung Wenn der Drucker kein Papier oder mehrere Blatt Papier gleichzeitig aus dem Fach entnimmt, können folgende Lösungen das Problem beheben. Eine der folgenden Situationen kann zu Papierstaus führen.
5. Stellen Sie sicher, dass die Luftfeuchtigkeit im Raum den Spezifikationen für diesen Drucker entspricht und dass das Papier in ungeöffneten Paketen gelagert wird. Die meisten Packungen werden in einer feuchtigkeitsabweisenden Verpackung verkauft, um das Papier trocken zu halten. In Umgebungen mit hoher Luftfeuchtigkeit können die oberen Blätter des Papierstapels im Fach Feuchtigkeit absorbieren und ggf. eine wellenförmige oder unebene Erscheinung haben.
Abbildung 9-2 Verfahren für das Biegen des Papierstapels 1 2 2. Verwenden Sie nur Papier, das den HP Spezifikationen für diesen Drucker entspricht. 3. Stellen Sie sicher, dass die Luftfeuchtigkeit im Raum den Spezifikationen für diesen Drucker entspricht und dass das Papier in ungeöffneten Paketen gelagert wird. Die meisten Packungen werden in einer feuchtigkeitsabweisenden Verpackung verkauft, um das Papier trocken zu halten.
● Möglicherweise wurden die Vorlagen nicht richtig eingelegt. Richten Sie die Seiten gerade aus, und zentrieren Sie den Stapel mithilfe der Papierführungen. ● Die Papierführungen erfüllen nur dann ihren Zweck, wenn sie an den Seiten des Papierstapels anliegen. Vergewissern Sie sich, dass der Stapel gerade liegt und dass die Führungen an den Kanten anliegen. ● Das Zufuhrfach des Vorlageneinzugs oder das Ausgabefach enthält möglicherweise mehr Seiten als maximal zulässig.
Beheben von Papierstaus Einführung Nachfolgend erfahren Sie, wie Sie Papierstaus am Gerät beheben.
Häufige oder wiederholt auftretende Papierstaus? Führen Sie die folgenden Schritte aus, um Probleme mit häufigen Papierstaus zu lösen. Wenn der erste Schritt das Problem nicht behoben hat, fahren Sie mit dem nächsten Schritt fort, bis Sie das Problem behoben haben. HINWEIS: Die Schritte variieren in Abhängigkeit vom Typ des Bedienfelds. 1 2 1 Zweizeiliges Bedienfeld (Faxmodelle) 2 Zweizeiliges Bedienfeld 3 Bedienfeld mit Touchscreen 3 1.
a. Zweizeilige Bedienfelder: Drücken Sie auf dem Bedienfeld des Druckers auf die Taste . Bedienfelder mit Touchscreen: Wischen Sie auf dem Bedienfeld des Druckers auf dem Startbildschirm, bis das Einrichtungsmenü angezeigt wird. Tippen Sie auf das Symbol „Setup“ , um das Menü zu öffnen. b. Öffnen des Menüs Dienst. c. Wählen Sie die Option Reinigungsseite aus. d. Legen Sie nach Aufforderung Papier im A4- oder Letter-Format ein. Warten Sie, bis der Vorgang abgeschlossen ist.
3. Öffnen Sie die Abdeckung des Vorlageneinzugs. 4. Beseitigen Sie den Papierstau. 5. Schließen Sie die Abdeckung des Vorlageneinzugs. Stellen Sie sicher, dass er vollständig geschlossen ist.
6. Öffnen Sie die Scannerabdeckung. Hat sich das Papier hinter der weißen Kunststoffabdeckung gestaut, ziehen Sie das Papier vorsichtig heraus. HEW 7. LETT -PAC KA RD Klappen Sie die Scannerabdeckung nach unten. HEW LE TT-P ACKA RD HINWEIS: Um Papierstaus zu vermeiden, müssen die Führungen im Zufuhrfach des Vorlageneinzugs eng an das Dokument angelegt werden. Entfernen Sie alle Heft- und Büroklammern von den Originaldokumenten.
1. Ziehen Sie das gestaute Papier langsam aus dem Drucker heraus. 2. Heben Sie die Scannereinheit an. OK 3. Öffnen Sie die Druckpatronenklappe.
4. Nehmen Sie die Tonerpatrone aus dem Drucker. OK 5. Entfernen Sie die Bildtrommel aus dem Drucker. OK 6. Entfernen Sie sämtliches gestaute Papier aus dem Tonerpatronenbereich. Benutzen Sie zum Entfernen des Papiers beide Hände, um zu vermeiden, dass es zerreißt.
7. Ziehen Sie die grüne Lasche heraus, um die Zugangsklappe für Papierstaus zu entriegeln. OK 8. Beseitigen Sie den Papierstau. OK 9. Schließen Sie die Zugangsklappe für Papierstaus.
10. Richten Sie die Bildtrommel an den Führungswalzen im Drucker aus. Schieben Sie die Bildtrommel so weit hinein, bis sie fest einrastet. OK 11. Richten Sie die Tonerpatrone an den Führungswalzen im Drucker aus. Schieben Sie die Tonerpatrone so weit hinein, bis sie fest einrastet.
12. Schließen Sie die Patronenklappe. OK 13. Senken Sie die Scannereinheit ab. OK Beheben von Papierstaus im Tonerpatronenbereich Die folgenden Informationen beschreiben das Beheben von Papierstaus im Tonerpatronenbereich. Wenn ein Papierstau auftritt, wird eine Fehlermeldung im zweizeiligen Bedienfeld angezeigt, und auf dem TouchscreenBedienfeld wird eine Animation angezeigt, um die Beseitigung des Papierstaus zu vereinfachen.
1. Heben Sie die Scannereinheit an. OK 2. Öffnen Sie die Druckpatronenklappe. OK 3. Nehmen Sie die Tonerpatrone aus dem Drucker.
4. Entfernen Sie die Bildtrommel aus dem Drucker. OK 5. Entfernen Sie sämtliches gestaute Papier aus dem Tonerpatronenbereich. Benutzen Sie zum Entfernen des Papiers beide Hände, um zu vermeiden, dass es zerreißt. OK 6. Ziehen Sie die grüne Lasche heraus, um die Zugangsklappe für Papierstaus zu entriegeln.
7. Beseitigen Sie den Papierstau. OK 8. Schließen Sie die Zugangsklappe für Papierstaus. OK 9. Richten Sie die Bildtrommel an den Führungswalzen im Drucker aus. Schieben Sie die Bildtrommel so weit hinein, bis sie fest einrastet.
10. Richten Sie die Tonerpatrone an den Führungswalzen im Drucker aus. Schieben Sie die Tonerpatrone so weit hinein, bis sie fest einrastet. OK 11. Schließen Sie die Patronenklappe. OK 12. Senken Sie die Scannereinheit ab. OK Beheben von Staus im Ausgabefach Gehen Sie folgendermaßen vor, um nach Papier in allen möglichen Papierstau-Positionen im Ausgabefach zu suchen.
dem Touchscreen-Bedienfeld wird eine Animation angezeigt, um die Beseitigung des Papierstaus zu vereinfachen. 1. Wenn Papier im Ausgabefach sichtbar ist, fassen Sie das Papier oben an, und ziehen Sie es heraus. OK 2. Heben Sie die Scannereinheit an. OK 3. Öffnen Sie die Druckpatronenklappe.
4. Ziehen Sie die grüne Lasche heraus, um die Zugangsklappe für Papierstaus zu entriegeln. OK 5. Beseitigen Sie den Papierstau. OK 6. Schließen Sie die Zugangsklappe für Papierstaus.
7. Schließen Sie die Patronenklappe. OK 8. Senken Sie die Scannereinheit ab. OK Beheben von Papierstaus im Duplexer Gehen Sie folgendermaßen vor, um nach Papier in allen möglichen Papierstau-Positionen im Duplexer zu suchen. Bei Touchscreen-Modellen wird auf dem Bedienfeld eine Animation angezeigt, die Ihnen das Beheben des Staus erleichtert.
1. Öffnen Sie die hintere Klappe. 2. Nehmen Sie eventuell vorhandenes Papier aus dem Duplexbereich heraus. Benutzen Sie zum Entfernen des Papiers beide Hände, um zu vermeiden, dass es zerreißt. 3. Schließen Sie die hintere Klappe.
4. Heben Sie die Scannereinheit an. OK 5. Öffnen Sie die Druckpatronenklappe. OK 6. Ziehen Sie die grüne Lasche heraus, um die Zugangsklappe für Papierstaus zu entriegeln.
7. Beseitigen Sie den Papierstau. OK 8. Schließen Sie die Zugangsklappe für Papierstaus.
9. Schließen Sie die Patronenklappe. OK 10. Senken Sie die Scannereinheit ab.
Reinigen der austauschbaren Folieneinheit des ADF Im Laufe der Zeit können sich Schmutzflecken auf dem Glasstreifen des automatischen Vorlageneinzugs (ADF) und der austauschbaren Folieneinheit ablagern, wodurch die Leistung beeinträchtigt wird. Gehen Sie folgendermaßen vor, um das Glas und die Folieneinheit zu reinigen. 1. Öffnen Sie die Scannerabdeckung, und suchen Sie dann die austauschbare Folieneinheit des ADF. 1 2 2. Verwenden Sie zwei Schlitze, um die Folieneinheit aus dem Scanner zu nehmen. 3.
4. Reinigen Sie den Glasstreifen und die Folieneinheit mit einem fusselfreien Tuch. ACHTUNG: Scheuermittel, Azeton, Reinigungsbenzin, Ammoniak, Spiritus oder Tetrachlorkohlenstoff dürfen nicht zur Reinigung des Druckers verwendet werden. Diese Stoffe können den Drucker beschädigen. Bringen Sie keine Flüssigkeiten direkt auf das Glas oder die Druckplatte auf. Sie könnten in den Drucker eindringen und dieses beschädigen. 5. Setzen Sie das Folieneinheit wieder ein.
Verbesserung der Druckqualität ● Einführung ● Drucken von einem anderen Softwareprogramm ● Prüfen der Papiersorte für den Druckjob ● Überprüfen des Status der Tonerkartusche ● Reinigen des Druckers ● Führen Sie eine Sichtprüfung der Tonerpatrone und der Bildtrommel durch.
Überprüfen der Papiersorteneinstellung (OS X) 1. Klicken Sie auf das Menü Datei und dann auf Drucken. 2. Wählen Sie den Drucker im Menü Drucker aus. 3. Der Druckertreiber zeigt standardmäßig das Menü Kopien & Seiten an. Öffnen Sie die Dropdown-Liste der Menüs und dann das Menü Fertigstellung. 4. Wählen Sie in der Dropdown-Liste Medientyp einen Typ aus. 5. Klicken Sie auf die Schaltfläche Drucken.
Schritt 2: Überprüfen des Verbrauchsmaterialstatus 1. Überprüfen Sie im Bericht zum Status der Verbrauchsmaterialien den Prozentsatz für die Resttonermenge der Tonerpatronen und ggf. den Status anderer austauschbarer Wartungsteile. Die Druckqualität kann durch die Verwendung einer Tonerpatrone, die das Ende ihrer geschätzten Gebrauchsdauer erreicht hat, beeinträchtigt werden. Die Seite für das Gerät zeigt an, wenn der Füllstand von Verbrauchsmaterial sehr niedrig ist.
1. Zweizeilige Bedienfelder: Drücken Sie auf dem Bedienfeld des Druckers die Taste „Einrichten“ . Bedienfelder mit Touchscreen: Wischen Sie auf dem Bedienfeld des Druckers auf dem Startbildschirm, bis das Einrichtungsmenü angezeigt wird. Tippen Sie auf das Symbol Setup , um das Menü zu öffnen. 2. 3. Öffnen Sie die folgenden Menüs: ● Wartung ● Reinigungsseite Legen Sie normales Letter- oder A4-Papier ein, wenn Sie dazu aufgefordert werden, und drücken Sie dann die Schaltfläche OK.
4. Wenn Sie Kratzer, Fingerabdrücke oder andere Schäden an der Bildtrommel erkennen, tauschen Sie die Tonerpatrone und die Bildtrommel aus. 5. Setzen Sie die Tonerpatrone und die Bildtrommel wieder ein, und drucken Sie einige Seiten, um zu prüfen, ob das Problem behoben wurde.
1 2 3 1 Zweizeiliges Bedienfeld (Faxmodelle) 2 Zweizeiliges Bedienfeld 3 Bedienfeld mit Touchscreen 1. Zweizeilige Bedienfelder: Drücken Sie auf dem Bedienfeld des Druckers die Taste „Einrichten“ . Bedienfelder mit Touchscreen: Wischen Sie auf dem Bedienfeld des Druckers auf dem Startbildschirm, bis das Einrichtungsmenü angezeigt wird. Tippen Sie auf das Symbol Setup , um das Menü zu öffnen. 2. Öffnen Sie die folgenden Menüs: ● Systemkonfiguration ● Druckqualität ● Ausrichtung anp.
Treiber für HP PCL-6 Dieser produktspezifischen Druckertreiber unterstützt Windows 8 und neuere Betriebssysteme, die Treiber der Version 4 unterstützen. Eine Liste der unterstützten Betriebssysteme finden Sie auf www.hp.com/go/support.
1 2 1 Zweizeiliges Bedienfeld (Faxmodelle) 2 Zweizeiliges Bedienfeld 3 Bedienfeld mit Touchscreen 1. 3 Zweizeilige Bedienfelder: Drücken Sie auf dem Bedienfeld des Druckers die Taste „Einrichten“ . Bedienfelder mit Touchscreen: Wischen Sie auf dem Bedienfeld des Druckers auf dem Startbildschirm, bis das Einrichtungsmenü angezeigt wird. Tippen Sie auf das Symbol Setup , um das Menü zu öffnen. 2. 3.
Verbessern von Kopier- und Scanqualität Einführung Sollten bei dem Drucker Probleme mit der Bildqualität eintreten, versuchen Sie die folgenden Lösungsmöglichkeiten in der angegebenen Reihenfolge, um das Problem zu beheben.
1 2 1 Zweizeiliges Bedienfeld (Faxmodelle) 2 Zweizeiliges Bedienfeld 3 Bedienfeld mit Touchscreen 3 Zweizeilige Bedienfelder 1. Drücken Sie die Taste Kopiermenü . 2. Öffnen Sie das Menü Papier. 3. Wählen Sie das Papierformat im Fach aus, und drücken Sie dann OK. 4. Wählen Sie den Papiertyp im Fach aus, und drücken Sie dann OK. Bedienfelder mit Touchscreen 1. Berühren Sie auf dem Bedienfeld des Druckers auf dem Startbildschirm das Symbol Kopieren . 2.
1 2 1 Zweizeiliges Bedienfeld (Faxmodelle) 2 Zweizeiliges Bedienfeld 3 Bedienfeld mit Touchscreen 3 Zweizeilige Bedienfelder 1. Drücken Sie auf dem Bedienfeld des Druckers die Taste Kopiermenü . 2. Um die Kopierqualität für verschiedene Arten von Dokumenten zu optimieren, wählen Sie mit den Pfeiltasten das Menü Optimieren aus, und drücken Sie dann die Taste OK. Die folgenden Einstellungen für die Kopierqualität sind verfügbar: ● Autom.
Randloses Kopieren Der Drucker kann nicht vollkommen randlos drucken. Es ist ein nicht bedruckbarer Rand von 4 mm auf der Seite vorhanden. Berücksichtigen des Druckrands oder Scannen mit abgeschnittenen Rändern ● Ist das Original kleiner als das Ausgabeformat, legen Sie das Original in ca. 4 mm Entfernung von der mit dem Symbol gekennzeichneten Ecke auf das Glas. Wiederholen Sie den Kopiervorgang oder scannen Sie mit dieser Position.
2. Wischen Sie sowohl die Einzugswalzen als auch die Trennvorrichtung mit einem feuchten, fusselfreien Tuch ab, um Schmutzablagerungen zu entfernen. ACHTUNG: Scheuermittel, Azeton, Reinigungsbenzin, Ammoniak, Spiritus oder Tetrachlorkohlenstoff dürfen nicht zur Reinigung des Druckers verwendet werden. Diese Stoffe können den Drucker beschädigen. Bringen Sie keine Flüssigkeiten direkt auf das Glas oder die Andruckplatte auf. Sie könnten in den Drucker eindringen und dieses beschädigen. 3.
Verbessern der Faxqualität Einführung Sollten bei dem Drucker Probleme mit der Bildqualität eintreten, versuchen Sie die folgenden Lösungsmöglichkeiten in der angegebenen Reihenfolge, um das Problem zu beheben.
Überprüfen der Auflösungseinstellungen zum Senden von Faxen Wenn der Drucker ein Fax nicht senden kann, weil das Empfangsgerät nicht antwortet oder besetzt ist, versucht er gemäß den Einstellungen für Wahlwiederholung im Besetztfall, bei keiner Rufannahme oder bei einem Kommunikationsfehler eine Wahlwiederholung durchzuführen. HINWEIS: Die Schritte variieren in Abhängigkeit vom Typ des Bedienfelds. 1 2 1 Zweizeiliges Bedienfeld (Faxmodelle) 2 Bedienfeld mit Touchscreen Zweizeilige Bedienfelder 1.
Überprüfen der Fehlerkorrektureinstellungen Wenn der Drucker gerade ein Fax sendet oder empfängt, überwacht er normalerweise die Signale in der Telefonleitung. Wenn der Drucker während der Übertragung einen Fehler erkennt und die Fehlerkorrektureinstellung auf Ein eingestellt ist, kann der Drucker den Teil des Faxes erneut anfordern. Werkseitig ist für Fehlerkorrektur Ein eingestellt.
3. Tippen Sie auf das Menü. 4. Berühren Sie die Schaltfläche Ein. Überprüfen der Seitenformateinstellung Falls der Drucker einen Faxjob von der Seite gedruckt hat, aktivieren Sie die Seitenformateinstellungsfunktion aus dem Bedienfeld des Druckers. HINWEIS: Die Einstellung für das Standardpapierformat muss der Größe des Papiers im Papierfach entsprechen. HINWEIS: Die Schritte variieren in Abhängigkeit vom Typ des Bedienfelds.
3. a. Faxeinrichtung b. Erw. Einstell. c. An Seite anpassen Berühren Sie die Schaltfläche Ein. Reinigen der Walzen und der Trennvorrichtung des Vorlageneinzugs Wenn am Vorlageneinzug des Geräts Probleme bei der Papierzuführung auftreten, wie z. B. Papierstaus oder das Einziehen mehrerer Blätter gleichzeitig, reinigen Sie die Vorlageneinzugswalzen und die Trennvorrichtung. 1. Öffnen Sie die Abdeckung des Vorlageneinzugs.
2. Wischen Sie sowohl die Einzugswalzen als auch die Trennvorrichtung mit einem feuchten, fusselfreien Tuch ab, um Schmutzablagerungen zu entfernen. ACHTUNG: Scheuermittel, Azeton, Reinigungsbenzin, Ammoniak, Spiritus oder Tetrachlorkohlenstoff dürfen nicht zur Reinigung des Druckers verwendet werden. Diese Stoffe können den Drucker beschädigen. Bringen Sie keine Flüssigkeiten direkt auf das Glas oder die Andruckplatte auf. Sie könnten in den Drucker eindringen und dieses beschädigen. 3.
Lösen von Problemen in drahtgebundenen Netzwerken Einführung Prüfen Sie folgende Aspekte, um sicherzugehen, dass der Drucker mit dem Netzwerk kommuniziert. Drucken Sie zu Beginn eine Konfigurationsseite über das Bedienfeld des Druckers, und ermitteln Sie die IP-Adresse des Druckers, die auf dieser Seite angegeben ist.
a. 2. Öffnen Sie eine Befehlszeile auf Ihrem Computer: ● Klicken Sie unter Windows auf Start und danach auf Ausführen. Geben Sie den Befehl cmd ein, und drücken Sie danach die Eingabetaste. ● Gehen Sie unter OS X zu Anwendungen, Dienstprogramme, und öffnen Sie anschließend Terminal. b. Geben Sie Ping und anschließend die IP-Adresse Ihres Druckers ein. c. Wenn im Fenster Rückmeldungen angezeigt werden, ist das Netzwerk funktionsfähig.
Beheben von Problemen mit dem drahtlosen Netzwerk ● Einführung ● Checkliste für die drahtlose Verbindung ● Nach Abschluss der drahtlosen Konfiguration druckt der Drucker nicht ● Der Drucker druckt nicht, und auf dem Computer ist eine Firewall eines Drittanbieters installiert ● Die drahtlose Verbindung funktioniert nicht mehr, nachdem die Position des drahtlosen Routers oder des Druckers verändert wurde ● Der Anschluss mehrerer Computer an den drahtlosen Drucker ist nicht möglich ● Beim Anschlus
● Stellen Sie sicher, dass es keine Hindernisse gibt, die das drahtlose Signal blockieren könnten. Entfernen Sie alle großen Metallobjekte zwischen dem Zugangspunkt und dem Drucker. Stellen Sie sicher, dass sich keine Säulen, Wände oder Stützpfeiler, die Metall- oder Betonbestandteile aufweisen, zwischen dem Drucker und dem Zugangspunkt befinden.
Der Anschluss mehrerer Computer an den drahtlosen Drucker ist nicht möglich 1. Stellen Sie sicher, dass sich die anderen Computer in Funkreichweite befinden und keine Hindernisse das Signal blockieren. In den meisten Netzwerken beträgt die Funkreichweite 30 m vom drahtlosen Zugangspunkt. 2. Vergewissern Sie sich, dass der Drucker eingeschaltet ist und sich im Bereitschaftsmodus befindet. 3. Stellen Sie sicher, dass nicht mehr als 5 gleichzeitige Wi-Fi Direct-Benutzer vorhanden sind. 4.
a. Drucken Sie eine Konfigurationsseite. b. Vergleichen Sie die SSID (Service Set Identifier) auf der Konfigurationsseite mit der in der Druckerkonfiguration des Computers. c. Wenn die Zahlen nicht übereinstimmen, sind die beiden Geräte nicht mit demselben Netzwerk verbunden. Konfigurieren Sie die Drahtlos-Verbindung für den Drucker neu.
Reduzieren von Störungen in einem drahtlosen Netzwerk Mit den folgenden Tipps können Störungen in einem drahtlosen Netzwerk reduziert werden: DEWW ● Halten Sie die drahtlosen Geräte fern von großen Metallobjekten, wie Aktenschränken, oder anderen elektromagnetischen Geräten, wie Mikrowellen oder schnurlosen Telefonen. Die Funksignale können durch diese Objekte gestört werden. ● Halten Sie die drahtlosen Geräte fern von großen Mauer- oder anderen Baustrukturen.
Lösen von Faxproblemen Einführung Die Informationen zur Fehlerbehebung bei Faxen können Ihnen helfen, eventuelle Probleme zu lösen. ● Checkliste für die Fehlerbehebung beim Faxen ● Beheben allgemeiner Faxprobleme Checkliste für die Fehlerbehebung beim Faxen ● Es stehen verschiedene Lösungen für Probleme zur Verfügung. Prüfen Sie nach jeder empfohlenen Vorgehensweise, ob das Problem behoben ist, indem Sie erneut versuchen, ein Fax zu senden.
c. Wählen Sie das Betriebssystem aus. d. Suchen Sie im Abschnitt Firmware nach dem Dienstprogramm für Firmware-Updates. HINWEIS: Stellen Sie sicher, dass Sie das für das Druckermodell spezifische Dienstprogramm für Firmware-Updates verwenden. e. Klicken Sie auf Download, klicken Sie auf Ausführen, und anschließend erneut auf Ausführen. f. Wenn das Programm startet, wählen Sie den Drucker in der Dropdownliste aus und klicken dann auf Firmware senden.
c. Öffnen Sie das Menü Faxdienst. d. Öffnen Sie das Menü Fehlerkorrektur. e. Wählen Sie die Einstellung Aus. HINWEIS: Dies kann zu einer Verminderung der Bildqualität führen. ● Verwenden Sie weißes Papier für das Original. Verwenden Sie keine Farben wie Grau, Gelb oder Pink. ● Erhöhen Sie den Wert der Einstellung Faxgeschwindigkeit. a. Öffnen Sie das Menü Setup. b. Öffnen Sie das Menü Faxeinrichtung. c. Öffnen Sie das Menü Erweiterte Einrichtung. d. Öffnen Sie das Menü Faxgeschwindigkeit.
c. Öffnen Sie das Menü Faxdienst. d. Öffnen Sie das Menü Fehlerkorrektur. e. Wählen Sie die Einstellung Ein. ● Überprüfen Sie die Tonerpatronen, und ersetzen Sie sie gegebenenfalls. ● Bitten Sie den Absender, den Kontrast auf dem sendenden Gerät dunkler einzustellen und das Fax erneut zu senden. Fax wird abgeschnitten oder auf zwei Seiten gedruckt ● Legen Sie die Einstellung für das Standardpapierformat fest. Faxe werden nur auf einem Papierformat gedruckt.
202 Kapitel 9 Lösen von Problemen DEWW
Index A Abmessungen, Drucker 12 AirPrint 63 Akustische Spezifikationen 13 Android-Geräte Drucken über 64 Anwendungen herunterladen 112 Anzahl der Kopien ändern 68 Ausgabefach Position 2 B Bedienfeld Hilfe 141 Position 2 Beidseitiger Druck Einstellungen (Windows) 51 Mac 55 Windows 51 Beidseitiges Drucken manuell, Windows 51 Beidseitiges Kopieren 70 Bereitschaft Einstellung 131 Bestellen Verbrauchsmaterial und Zubehör 30 Betriebssysteme unterstützte 10 Betriebssysteme, unterstützt 10 Bildqualität Überprüfen
Netzwerkprobleme 191 Überprüfen des Status der Tonerkartusche 173 Fehlerberhebung Probleme beim Papiereinzug 145 G Gewicht, Drucker 12 Glas, Vorlageneinzug reinigen 170 Glas reinigen 175, 180, 185 H Hauptzufuhrfach beladen 21 Etiketten einlegen 27 Umschläge einlegen 25 Hauptzufuhrfachs ausrichten 21 Heftklammermagazin Teilenummern 30 Hilfe, Bedienfeld 141 Hintere Klappe Position 3 HP Customer Care 140 HP Dienstprogramm 119 HP Dienstprogramm, Mac 119 HP Dienstprogramm für Mac Bonjour 119 Funktionen 119 HP
Speicher im Lieferumfang enthalten 10 Sperren Formatierer 128 Spezialpapier Drucken (Windows) 53 Spezifikationen Elektrisch und akustisch 13 Standardeinstellungen wiederherstellen 142 Status HP Dienstprogramm, Mac 119 Störungen in einem drahtlosen Netzwerk 197 Strom Verbrauch 13 Support Online 140 Systemanforderungen Integrierter HP Webserver 114 T Technischer Kundendienst Online 140 Teilenummern Ersatzteile 30 Heftklammernmagazine 30 Tonerpatrone 30 Tonerpatronen 30 Verbrauchsmaterial 30 Zubehör 30 Telefon
206 Index DEWW