Operation Manual

104 Chapter 5 - Removal and replacement

8 Unplug the fuser cable connector (callout 1) by pressing and

releasing the tab on the back of the connector.

9 Unplug five smaller cable connectors (callout 2) from the ECU

and unwind the cables from the fuser assembly.

10 Unplug the spade connector (callout 3).

11 Remove one screw (callout 4) from the paper delivery sensor,

and lift the paper delivery sensor out of the printer.

12 Lift the fuser assembly gently out of the printer.

Figure 48. Removing the fuser assembly (4 of 4)

To reinstall

Remove the large gear from the end of the fuser assembly, return the

fuser assembly to the chassis, and replace the large gear.