Manualshelf

Operation Manual

ManualsBrandsHP ManualsPrinterLASERJET1200
111112113114115116117118119120
EN
Internal assemblies 111
4 Remove two screws (callout 1).
5 Remove the fan assembly.
6 Gently thread the fan cable through the hole (callout 2) in the right
side plate.
7 Lift the fan assembly off of the printer.
.
Figure 55. Removing the fan (2 of 2)
To reinstall
It might be easier to remove the ECU pan (see page 120) before
rerouting the cables through the hole (callout 2) in the right side plate.
2
2
2
1